Hitachi C8FSE Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 0 | 999001 | Carbon Brush (1 Pair) | £8.74 |
|
| 0 | 329461 | Internal Wire (g) | £0.00 |
|
| 0 | 329430 | Internal Wire (g) | £0.00 |
|
| 0 | 329861 | Noise Suppressor 220v-240v | £7.69 |
|
| 0 | 329862 | Noise Suppressor 110v | £9.73 |
|
| 0 | 340729C | Stator Ass'y 110v | £30.91 |
|
| 0 | 340729D | Stator Ass'y 120v | £0.00 |
|
| 0 | 340729E | Stator Ass'y 220v-230v | £28.25 |
|
| 0 | 340729F | Stator Ass'y 240v | £28.25 |
|
| 0 | 360839U | Armature Ass'y 110v-120v | £36.51 |
|
| 0 | 360839E | Armature Ass'y 220v-230v | £36.51 |
|
| 0 | 360839F | Armature Ass'y 240v | £36.50 |
|
| 0 | 340729G | STATOR ASS'Y 220V-230V | £0.00 |
|
| 0 | 360839G | ARMATURE ASS'Y 220V-230V | £0.00 |
|
| 0 | 335780 | GUIDE HOLDER | £4.39 |
|
| 2 | 312-488 | Clamp Lever | £11.36 |
|
| 3 | 329409 | Bolt (left Hand) D10 | £5.33 |
|
| 4 | 965-077 | Special Washer | £1.00 |
|
| 5 | 325-028 | Set Pin | £5.55 |
|
| 6 | 996-407 | O-ring (1ap-12) | £1.00 |
|
| 10 | 329417 | Scale (b) | £2.73 |
|
| 11 | 329408 | Liner (a) | £0.00 |
|
| 12 | 312-481 | Spring | £3.80 |
|
| 13 | 329422 | Turn Table Ass'y | £85.33 |
|
| 14 | 329418 | Shaft (b) | £0.00 |
|
| 15 | 949-437 | Bolt Washer M12 (10 Pcs.) | £2.20 |
|
| 18 | 949-256 | Machine Screw M6x16 (10 Pcs.) | £1.00 |
|
| 19 | 329421 | Table Insert | £2.80 |
|
| 20 | 321-342 | Spacer (a) | £2.46 |
|
| 21 | 329416 | Shaft (a) | £1.00 |
|
| 22 | 673-489 | Retaining Ring (e-type) For D5 Shaft | £1.00 |
|
| 23 | 322-283 | Side Handle | £5.59 |
|
| 24 | 321-339 | Lever Shaft | £2.46 |
|
| 25 | 321-338 | Lever | £2.46 |
|
| 26 | 321-340 | Spring (d) | £2.46 |
|
| 27 | 329415 | Shaft (c) | £3.05 |
|
| 28 | 987-860 | Seal Lock Hex. Socket Set Screw M6x6 | £1.00 |
|
| 29 | 321-417 | Spring (e) | £4.63 |
|
| 30 | 322-280 | Stopper (a) | £6.52 |
|
| 31 | 324-395 | Cover (b) | £0.00 |
|
| 32 | 875-249 | Thrust Washer | £1.77 |
|
| 33 | 321-336 | Pin Cover | £2.46 |
|
| 34 | 302-522 | Knob Bolt M10x66 | £13.22 |
|
| 36 |
This part is unavailable
Not Available
|
|||
| 37 | 949-432 | Bolt Washer M6 (10 Pcs.) | £1.00 |
|
| 38 | 329859 | Vise Shaft | £0.00 |
|
| 39 | 302-532 | Vise Plate | £3.50 |
|
| 40 | 949-216 | Machine Screw M4x10 (10 Pcs.) | £1.00 |
|
| 41 | 329860 | Vise Ass'y | £7.38 |
|
| 42 | 949-678 | Bolt M8x35 (10 Pcs.) | £3.21 |
|
| 43 | 949-457 | Spring Washer M8 (10 Pcs.) | £1.00 |
|
| 44 | 949-433 | Bolt Washer M8 (10 Pcs.) | £1.00 |
|
| 45 | 307-937 | Wing Bolt (a) | £1.00 |
|
| 46 | 329420 | Fence (b) | £14.94 |
|
| 48 | 329465 | Plate | £1.00 |
|
| 49 | 330138 | Sub Fence | £12.37 |
|
| 51 | 998-844 | Holder | £6.42 |
|
| 52 | 949-610 | Bolt M6x10 (10 Pcs.) | £1.00 |
|
| 53 | 324-400 | Liner | £2.08 |
|
| 54 | 329419 | Fence (a) | £15.09 |
|
| 55 | 329414 | Base Ass'y | £116.73 |
|
| 56 | 323-606 | Base Rubber | £1.00 |
|
| 57 | 315-210 | Scale (a) | £9.07 |
|
| 58 |
This part is unavailable
Not Available
|
|||
| 81 | 322-889 | Sleeve | £1.00 |
|
| 82 | 329410 | Spring | £11.67 |
|
| 83 | 961-554 | Hex. Socket Set Screw M8x10 | £1.00 |
|
| 84 | 329427 | Hinge (a) Ass'y | £126.61 |
|
| 85 | 949-237 | Machine Screw M5x12 (10 Pcs.) | £1.00 |
|
| 86 | 998-980 | Spacer | £1.00 |
|
| 87 | 329411 | Link | £9.89 |
|
| 88 | 320-141 | Hinge Shaft (a) | £12.35 |
|
| 89 | 984-528 | O-ring (p-6) | £1.00 |
|
| 90 | 302-518 | Stopper Pin Ass'y | £5.41 |
|
| 91 | 324058 | Hinge Cover | £6.71 |
|
| 92 | 949-429 | Bolt Washer M4 (10 Pcs.) | £1.00 |
|
| 94 | 500-434Z | Cord | £0.00 |
Not Available
|
| 94 | 930-055 | Cord | £0.00 |
|
| 94 | 323-974 | Cord | £0.00 |
|
| 94 | 500-447Z | Cord | £7.10 |
|
| 94 | 500-234Z | Cord | £41.19 |
|
| 94 | 500-423Z | Cord | £19.15 |
|
| 94 | 500-439Z | Cord | £41.19 |
|
| 94 | 500-435Z | Cord | £41.19 |
|
| 94 | 500-455Z | Cord | £0.00 |
|
| 94 | 500-247Z | Cord | £41.19 |
|
| 94 | 500-456Z | Cord | £0.00 |
|
| 94 | 500-461Z | Cord | £14.18 |
|
| 96 | 948-193 | Nylon Clip | £1.00 |
|
| 96 | 948-614 | Nylon Clip | £1.00 |
|
| 97 | 329492 | Support | £10.79 |
|
| 98 | 949-215 | Machine Screw M4x8 (10 Pcs.) | £1.00 |
|
| 99 | 329424 | Ball Bushing | £31.24 |
|
| 100 | 326141 | Bushing | £9.16 |
|
| 101 | 324-418 | Knob Bolt M6x25 | £4.28 |
|
| 102 | 947-859 | Lock Spring | £1.00 |
|
| 103 | 307-956 | Seal Lock Hex. Socket Set Screw M6x10 | £1.00 |
|
| 104 | 949-217 | Machine Screw M4x12 (10 Pcs.) | £1.00 |
|
| 105 | 321-329 | Indicator | £2.46 |
|
| 106 | 301575 | Hex. Socket Set Screw M6x8 | £1.00 |
|
| 107 | 305-558 | Tapping Screw (w/ |
£1.00 |
|
| 109 | 329428 | Holder (a) | £70.53 |
|
| 110 | 321-333 | Guard Ass'y | £13.86 |
|
| 151 | 984-750 | Tapping Screw (w/ |
£1.00 |
|
| 152 | 938-051 | Cord Armor D10.1 | £1.00 |
|
| 153 | 937-631 | Cord Clip | £1.00 |
|
| 154 | 329437 | Housing Ass'y | £36.36 |
|
| 155 |
This part is unavailable
Not Available
|
|||
| 156 | 322-123 | Machine Screw (w/ |
£2.09 |
|
| 157 | 938-477 | Hex. Socket Set Screw M5x8 | £1.00 |
|
| 158 | 957-571 | Brush Holder | £3.66 |
|
| 159 | 999001 | Carbon Brush (1 Pair) | £8.74 |
|
| 159 | 999-021 | Carbon Brush (1 Pair) | £4.06 |
|
| 160 | 931-266 | Brush Cap | £1.00 |
|
| 161 | 301-653 | Tapping Screw (w/ |
£1.00 |
|
| 162 | 329438 | Handle Cover | £0.00 |
Not Available
|
| 163 | 324-518 | Ferrite Core | £11.03 |
|
| 164 | 959-141 | Connector 50092 (10 Pcs.) | £6.40 |
|
| 165 | 329461 | Internal Wire (g) | £0.00 |
|
| 165 | 329430 | Internal Wire (g) | £0.00 |
|
| 166 | 324-424 | Switch (3p Faston Type) W/ |
£6.35 |
|
| 167 | 958-308Z | Pillar Terminal (a) | £6.76 |
|
| 168 | 329861 | Noise Suppressor 220v-240v | £7.69 |
|
| 168 | 329862 | Noise Suppressor 110v | £9.73 |
|
| 169 | 329439 | Cap | £0.00 |
|
| 170 | 323433 | Spring | £2.40 |
|
| 171 | 323432 | Lock Lever | £6.96 |
|
| 172 | 329436 | Fan Guide | £3.02 |
|
| 173 | 960-108 | Hex. Hd. Tapping Screw D4x60 | £1.00 |
|
| 174 | 931-867 | Brush Terminal | £2.20 |
|
| 175 | 340729C | Stator Ass'y 110v | £30.91 |
|
| 175 | 340729D | Stator Ass'y 120v | £0.00 |
|
| 175 | 340729E | Stator Ass'y 220v-230v | £28.25 |
|
| 175 | 340729F | Stator Ass'y 240v | £28.25 |
|
| 176 | 600-0VV | Ball Bearing 6000vvcmps2l | £6.83 |
|
| 177 | 315-877 | Dust Seal | £1.95 |
|
| 179 | 322-089 | Bearing Bushing | £5.86 |
|
| 180 | 322090 | Rubber Bushing | £2.15 |
|
| 181 | 360839U | Armature Ass'y 110v-120v | £36.51 |
|
| 181 | 360839E | Armature Ass'y 220v-230v | £36.51 |
|
| 181 | 360839F | Armature Ass'y 240v | £36.50 |
|
| 182 | 961-468 | Knob Bolt M6x37 | £1.00 |
|
| 183 | 988-821 | Lock Spring | £5.10 |
|
| 184 | 303-409 | Nylock Bolt M8x25 | £1.00 |
|
| 185 | 996-274 | Machine Screw (w/ |
£1.00 |
|
| 186 | 329413 | Spindle Cover | £8.74 |
|
| 187 |
This part is unavailable
Not Available
|
|||
| 188 | 935-196 | Machine Screw (w/ |
£1.00 |
|
| 189 | 877-839 | Seal Lock Hex. Socket Hd. Bolt M5x10 | £1.00 |
|
| 190 | 329431 | Gear Case | £81.59 |
|
| 191 | 328922 | Hitachi Plate | £2.56 |
|
| 192 | 308259 | Bolt (w/ |
£1.00 |
|
| 193 | 949-260 | Machine Screw M6x25 (10 Pcs.) | £1.91 |
|
| 194 | 606-ZZM | Ball Bearing 606zzc2ps2l | £13.25 |
|
| 195 | 949-455 | Spring Washer M6 (10 Pcs.) | £1.00 |
|
| 196 | 949-425 | Washer M6 (10 Pcs.) | £1.00 |
|
| 197 | 329463 | Lock Lever Spring | £1.00 |
|
| 198 | 329462 | Lock Lever | £6.71 |
|
| 199 | 322-950 | Special Screw M6 | £1.00 |
|
| 200 | 321-364 | Dust Guide | £2.40 |
|
| 201 | 312-492 | Guide Holder | £5.50 |
|
| 202 | 998-335 | Bolt (left Hand) W/ |
£1.00 |
|
| 203 |
This part is unavailable
Not Available
|
|||
| 204 | 976-819 | Collar (b) For D25.4 Hole | £4.90 |
|
| 204 | 974-663Z | Collar (a) For D30 Hole | £6.56 |
|
| 205 | 949-322 | Flat Hd. Screw M4x10 (10 Pcs.) | £1.00 |
|
| 206 | 307-731 | Cover | £3.73 |
|
| 207 | 329412 | Lower Guard | £27.76 |
|
| 208 | 317-203 | Return Spring | £3.98 |
|
| 209 | 329432 | Spindle Ass'y | £26.33 |
|
| 210 | 327-694 | Ball Bearing 6003vvcm (nylon Retainer) | £7.10 |
|
| 211 | 329435 | Bearing Holder | £8.01 |
|
| 212 | 608-VVM | Ball Bearing 608vvc2ps2l | £5.16 |
|
| 213 | 308-789 | Washer (d) | £15.17 |
|
| 214 | 949-241 | Machine Screw M5x20 (10 Pcs.) | £1.00 |
|
| 215 | 949-454 | Spring Washer M5 (10 Pcs.) | £1.00 |
|
| 218 | 318-452 | Washer (g) | £1.87 |
|
| 219 | 336578 | CONTROLLER | £49.58 |
|
| 221 | 336579 | INTERNAL WIRE (H) L300 | £3.30 |
|
| 222 | 336580 | INTERNAL WIRE (H) L140 | £0.00 |
|
| 501 | 940-543 | Box Wrench 10mm | £6.59 |
|
| 502 | 322-955 | Dust Bag (black) | £15.70 |
|
| 601 | 963-837 | Nylon Nut M6 | £1.00 |
|
| 602 | 329465 | Plate | £1.00 |
|
| 603 | 330138 | Sub Fence | £12.37 |
|
| 604 | 949-342 | Flat Hd. Screw M6x25 (10 Pcs.) | £1.91 |
|
| 605 | 329464 | Sub Fence Ass'y | £27.64 |
|
| 606 | 321-374 | Crown Molding Stopper (l) Ass'y | £36.38 |
|
| 607 | 960-017 | Knob Bolt M6x32 | £2.26 |
|
| 609 |
This part is unavailable
Not Available
|
|||
| 611 | 322-957 | Vise (b) Ass'y | £116.03 |
|
| 612 | 998-836 | Knob Bolt M6x11 | £0.00 |
Not Available
|
| 613 |
This part is unavailable
Not Available
|
|||
| 614 | 306-985 | Washer (h) | £1.00 |
|
| 615 | 964-851 | Base Rubber | £1.00 |
|
| 616 | 304-043 | Machine Screw (w/ |
£1.00 |
|
| 617 | 318-967 | Vise Shaft | £7.27 |
|
| 618 | 321-551 | Knob Bolt M10x54 | £14.98 |
|
| 619 | 329782 | Crown Molding Vise Ass'y | £0.00 |
|
| 620 | 974-561 | Stopper | £7.72 |
|
| 621 | 949-404 | Wing Bolt M6x20 (10 Pcs.) | £8.59 |
|
| 622 | 321-390 | Crown Molding Stopper Holder | £18.26 |
|
| 623 |
This part is unavailable
Not Available
|
|||
| 624 | 301-806 | Wing Bolt M6x15 | £1.00 |
|
| 625 | 321-373 | Crown Molding Stopper (r) Ass'y | £36.38 |
|
| 626 |
This part is unavailable
Not Available
|
|||
| 627 | 321-549 | Holder | £21.13 |
|
| 628 | 949-313 | Wing Nut M6 (10 Pcs.) | £5.66 |
|
| 629 | 949-556 | Nut M6 (10 Pcs.) | £1.00 |
|
| 630 | 967-329 | Washer (h) | £1.00 |
|
| 631 | 996-261 | Vise Plate | £1.00 |
|
| 632 | 996-283 | High Tension Bolt M6x65 | £2.46 |
|
| 633 | 321-553 | Guide Ass'y | £80.08 |
|
| 634 | 998-840 | Tct Saw Blade 216mm-d15.88 Hole-nt24 | £0.00 |
|
| 635 | 998-858 | Tct Saw Blade 216mm-d25.4 Hole-nt24 | £0.00 |
|
| 636 | 998-859 | Tct Saw Blade 216mm-d30 Hole-nt24 | £63.84 |
|
| 637 | 339237 | DUST COLLECTION ADAPTER (H) | £25.83 |
|
Hitachi C8FSE Spare Parts
The Hitachi C8FSE is an 8½-inch sliding compound mitre saw designed for accurate crosscutting, mitre cutting and bevel cutting. Its sliding mechanism allows it to handle wider workpieces than a standard mitre saw, making it a useful choice for both workshop and site applications.
The Hitachi C8FSE parts diagram above provides a detailed breakdown of the saw, covering the motor, carbon brushes, armature, stator, bearings, spindle, sliding mechanism, turntable, fence, blade guard, switch and electrical components. The original parts list contains hundreds of individual components and assemblies, making the diagram particularly useful when identifying a replacement part.
C8FSE Carbon Brushes and Motor Problems
If your C8FSE has started sparking, losing power, cutting out or refusing to start, the carbon brushes are one of the first components worth checking. A replacement pair of carbon brushes is listed specifically for the C8FSE, along with separate armature and stator assemblies.
If new brushes don't resolve excessive sparking or poor motor performance, the armature, stator, brush holder and bearings should be inspected for further wear.
C8FSE Armature and Bearings
A C8FSE that has become louder, rougher or increasingly vibratory may have worn bearings or a problem with the armature.
The motor and gearbox assembly contains the armature, stator, brush components, spindle and bearings as separate serviceable parts. This can make it possible to repair the source of a fault without replacing an entire assembly unnecessarily.
Sliding Mechanism and Guide Components
The sliding mechanism is an important part of the C8FSE, allowing the saw head to move through wider workpieces. If the head feels loose, doesn't slide smoothly or has developed excessive play, the guide components should be inspected.
The parts list includes ball bushings, bushings, guide components, slide-related shafts and retaining hardware, all of which can contribute to the smooth and accurate movement of the saw.
C8FSE Spindle and Blade Components
If you notice blade wobble, excessive vibration or difficulty securing the blade, inspect the spindle and blade mounting components.
The C8FSE parts list includes a spindle assembly, bearing holder, 6003 and 608 bearings, washers and the blade fixing bolt, allowing individual components around the blade drive to be identified.
Mitre Table and Adjustment Parts
Accurate mitre adjustment is essential for producing consistent cuts. If the table won't lock securely, moves after adjustment or the angle indicator isn't lining up correctly, the adjustment mechanism should be checked.
The parts breakdown includes the turntable assembly, hinge shafts, clamp lever, springs, indicator, scale and associated fixing components. Individual worn parts can therefore be replaced where available.
C8FSE Fence and Workpiece Support
The fence provides the reference point for holding timber securely during cutting. If the saw is producing inaccurate or inconsistent cuts, check that the fence and its mounting hardware are secure.
The C8FSE uses separate fence, sub-fence, holder, base and workpiece support components, as well as a dedicated vice assembly. These parts can be particularly useful when restoring an older saw that has suffered years of workshop use.
Blade Guard and Safety Components
The lower blade guard is an important safety component and should move freely and return correctly after each cut. If it is damaged, sticking or failing to operate properly, the guard and associated mechanism should be inspected.
The parts list includes the lower guard, return spring, cover, spindle components and associated fasteners, allowing individual parts to be identified rather than replacing larger sections of the saw.
Switch, Cable and Electrical Parts
If the C8FSE won't switch on or cuts out during use, the switch, power cable and internal wiring should be checked.
The parts information includes the cord, cord armour, cord clip, internal wires and noise suppressor, along with the main motor components. Electrical faults can therefore sometimes be traced to a relatively straightforward component rather than the motor itself.
Dust Collection and Smaller Parts
The C8FSE includes a dust bag and dust guide to help collect sawdust during cutting. If dust extraction isn't working effectively, check the bag, dust guide and surrounding passages for blockages or damage.
There are also many smaller components available for the saw, including springs, screws, washers, knobs, pins, retaining rings, handles and other fittings. These can be useful when repairing an older C8FSE where individual parts have become worn or damaged.
Find the Correct C8FSE Replacement Part
Use the Hitachi C8FSE parts diagram above to locate the component you need, then match its reference number with the C8FSE parts list to identify the appropriate Hitachi part number.
It's important to check the exact C8FSE model and voltage specification before ordering. The parts listings show different armatures and stators for 110V, 120V, 220V, 230V and 240V versions, so matching the machine correctly is particularly important for electrical components.
From Hitachi C8FSE carbon brushes, armatures and bearings to spindle components, sliding mechanism parts, fences, guards, switches, cables and mitre adjustment components, there is a wide range of Hitachi C8FSE spare parts available.
If your C8FSE has developed motor problems, excessive vibration, blade wobble, inaccurate cuts, sliding mechanism wear or an electrical fault, checking the parts diagram can help pinpoint the individual component required and keep this compact sliding compound mitre saw in service.