Skip to main content

We are currently experiencing substantial delays with Hitachi/HiKOKI and Metabo spare parts due to the two brands merging warehouse. At this moment in time we are unable to provide confirmed delivery dates on out of stock parts, for any urgent requirements please contact us prior to ordering.

Hitachi G13SB3 Parts

Drawings
Tapping Screw D5x25 (black)
£2.28
2A 333713
TAPPING SCREW (W/FLANGE) D5X30 (BLACK)
£0.00
Guard Plate
£1.00
Pushing Button
£1.00
Gear Cover Ass'y
£41.84
Nut M8 (10 Pcs.)
£1.00
Pinion
£17.74
Seal Ring (a)
£1.00
Washer (c)
£1.00
Ball Bearing 629t12ddc3ps2-l
£9.13
10 957-754
Rubber Ring
£1.94
11 321-734
Bearing Cover
£2.37
Armature 110v
£35.38
Armature Ass'y 120v
£0.00
Armature 230v-240v
£38.13
13 321-732
Fan Guide
£2.37
14 982-021
Hex. Hd. Tapping Screw D4x70
£1.00
Stator 230v
£27.18
Stator 240v
£0.00
Stator 110v
£25.38
Stator 120v
£0.00
16 315-877
Dust Seal
£1.95
17 608-VVM
Ball Bearing 608vvc2ps2l
£5.16
18A 336865
SIDE HANDLE
£11.46
18 303-255
Seal Lock Screw (w/sp. Washer) M4x10
£1.00
19 301-943
Lock Pin
£3.05
21 991-207
Seal Lock Screw (w/sp. Washer) M4x8
£1.00
22 936-680
Bearing Cover (b)
£1.00
23 620-1DD
Ball Bearing 6201ddcmps2l
£7.72
24 308-546
Felt Packing
£1.00
25 308-545
Packing Gland
£11.05
26 307-046
Seal Lock Screw (w/sp. Washer) M5x16
£1.00
27 944-109
Feather Key 3x3x8
£3.05
28 994-302
Spindle (b)
£16.08
28 994-301
Spindle (a)
£21.79
29 949-241
Machine Screw M5x20 (10 Pcs.)
£1.00
30 949-454
Spring Washer M5 (10 Pcs.)
£1.00
31 311-742
Wheel Guard Ass'y
£25.31
31 320-192
Wheel Guard Ass'y
£14.11
Wheel Washer (a) For D16 Hole
£10.31
32C 334456
WHEEL WASHER (C)
£3.61
Wheel Washer
£8.45
33 316-822
D. C. Wheels 125mm A36q (25 Pcs.)
£0.00
34 994-324
Wheel Nut M14
£6.04
Wheel Nut 5/8"-11unc
£7.73
35 311-492
Label
£1.00
36 311-744
Set Pin
£1.00
37 311-743
Lever
£7.72
38 880-734
Machine Screw (w/washers) M5x25 (black)
£1.00
39 311-491
Set Piece (b)
£6.26
40 874-759
Retaining Ring (e-type) For D2.5 Shaft
£1.00
41A 329054
Gear And Pinion Set
£20.05
42 This part is unavailable
Not Available
42 314-428
Slide Knob
£1.00
43 325-050
Housing
£20.30
44 321-733
Rubber Ring
£1.00
45 319-319
Pushing Button Switch
£20.61
46 This part is unavailable
Not Available
46 994-273
Noise Suppressor
£6.56
46 930-039
Noise Suppressor
£2.20
47 325-051
Slide Bar
£1.00
48 999-088
Carbon Brush (1 Pair)
£4.66
49 317-810
Brush Holder
£5.50
50 308-536
Spring
£2.18
51 325-054
Switch Holder
£1.00
52 980-063
Terminal
£1.00
53 984-750
Tapping Screw (w/flange) D4x16
£1.00
54 937-631
Cord Clip
£1.00
55 953-327
Cord Armor D8.8
£1.00
57 301-815
Tapping Screw (w/flange) D4x45
£0.00 Not Available
59 325-052
Tail Cover
£13.87
Cord
£7.10
Cord
£41.19
Cord
£19.41
Cord
£19.15
Cord
£41.19
Cord
£41.19
Cord
£41.19
Cord
£14.18
61 319-320
Faston Terminal
£1.95
501 938-332Z
Wrench
£3.25
502 956-633
Side Handle
£0.00 Not Available
502 994-322
Side Handle
£6.31
504A 325-515
Case
£33.33
601 938-317
Rubber Pad
£0.00
601 937-825Z
Rubber Pad
£10.24
602 938-318
Washer Nut
£0.00
602 937-826Z
Washer Nut
£7.58
603 314-062
Sanding Discs 125mm C-p16 (10 Pcs.)
£0.00
604 314-063
Sanding Discs 125mm C-p20 (10 Pcs.)
£0.00
605 314-064
Sanding Discs 125mm C-p24 (10 Pcs.)
£0.00
606 314-065
Sanding Discs 125mm C-p30 (10 Pcs.)
£0.00
607 314-066
Sanding Discs 125mm C-p36 (10 Pcs.)
£0.00
608 314-067
Sanding Discs 125mm C-p40 (10 Pcs.)
£0.00
609 314-068
Sanding Discs 125mm C-p50 (10 Pcs.)
£0.00
610 314-069
Sanding Discs 125mm C-p60 (10 Pcs.)
£0.00
611 314-070
Sanding Discs 125mm C-p80 (10 Pcs.)
£0.00
612 332790
WHEEL GUARD (FOR CUTTING)
£20.68
612 314-071
Sanding Discs 125mm C-p100 (10 Pcs.)
£0.00
613 314-072
Sanding Discs 125mm C-p120 (10 Pcs.)
£0.00
614 994-312
Wheel Washer (c) For D20 Hole
£0.00
615 994-313
Wheel Washer (c) For D22.2 Hole
£0.00
616 310-338
Super Washer
£21.13

The Hitachi G13SB3 is a 125mm disc grinder designed for grinding, cutting and finishing applications where a compact but powerful angle grinder is required. Its relatively small body makes it suitable for working in tighter areas, while the conventional brushed motor provides the drive needed for general metalworking and fabrication tasks.

With regular use, components such as the armature, carbon brushes, bearings, gears, spindle and switch can eventually wear. The correct Hitachi G13SB3 spare parts can help repair individual faults without needing to replace the complete grinder.

G13SB3 Parts Diagram and Parts List

The G13SB3 parts diagram above shows the individual components making up the grinder, including the motor, gearbox, spindle, wheel guard, switch, housing and electrical connections.

The parts list contains several components that vary according to voltage, including separate armature and stator references for 110V, 120V, 230V and 240V versions. Checking the voltage and exact model before ordering G13SB3 parts is therefore particularly important.

G13SB3 Armature, Stator and Motor Parts

The G13SB3 uses a conventional brushed motor, with the parts breakdown including the 360-734C 110V armature, 360-734U 120V armature and 360-734E 230–240V armature.

The corresponding stator range includes the 340-645C 110V stator, 340-645D 120V stator, 340-645E 230V stator and 340-645F 240V stator.

If your G13SB3 is losing power, running erratically or producing excessive sparking, the armature, stator and motor bearings are worth checking. The grinder's fan guide and bearing components should also be inspected if the motor has developed unusual noise or vibration.

G13SB3 Carbon Brushes and Electrical Parts

Carbon brushes are important service components on the G13SB3. The parts list includes the 999-088 carbon brush pair, 317-810 brush holder and 308-536 spring.

As brushes wear, the grinder can become intermittent, lose power or produce increased sparking. If your Hitachi G13SB3 will not start, checking the brushes, brush holder, switch and electrical connections is a sensible part of the diagnosis.

The 319-319 pushing button switch is listed as a separate component, together with the 325-054 switch holder, 980-063 terminal, Faston terminal and noise suppressor.

G13SB3 Gearbox, Gears and Bearings

The gearbox transfers power from the motor to the spindle and abrasive wheel. The G13SB3 parts breakdown includes the 329054 gear and pinion set, 308-541 pinion, 321-737 gear cover assembly and several bearings.

The 629T12 bearing, 608VVM bearing and 6201DD bearing support the rotating components within the motor and gearbox. If your G13SB3 is making a grinding or rattling noise, excessive bearing wear or damage to the gear and pinion assembly may be responsible.

Replacing the individual bearing or gear components can be useful when the rest of the grinder remains in good working condition.

G13SB3 Spindle and Wheel Components

The spindle transfers the gearbox output to the 125mm grinding or cutting wheel. The parts list includes 994-301 spindle (A) and 994-302 spindle (B), together with the feather key, wheel washers and wheel nuts.

The G13SB3 can use an M14 wheel nut, with 994324 listed for the appropriate configuration. A separate 937923P 5/8"-11UNC wheel nut is also listed for certain versions.

If the G13SB3 spindle has excessive movement or the wheel is not running correctly, inspect the spindle, bearings, key and retaining components before continuing to use the grinder.

G13SB3 Wheel Guard and Safety Parts

The wheel guard provides protection around the abrasive wheel and forms an important part of the grinder's safety system. The parts information includes several wheel guard assemblies, including 320192, 311742 and 333537, depending on the particular configuration.

The guard mechanism also includes the 311744 set pin, 311743 lever and 311491 set piece, together with screws and retaining components.

If the G13SB3 wheel guard is damaged, loose or not locking correctly, the individual mounting and adjustment parts should be checked against the parts diagram.

G13SB3 Housing, Switch and Cable Parts

The outer housing protects the motor and electrical components, while the switch and slide mechanism control operation. The parts list includes the 325050 housing, 314428 slide knob, 325051 slide bar and 325052 tail cover.

Cable-related components include the 953327 cord armour, 937631 cord clip and several different mains cord assemblies. If the grinder cuts out during use or has suffered damage around the cable entry, these smaller G13SB3 spare parts are worth checking.

The G13SB3 also includes a side handle and mounting hardware, allowing the grinder to be controlled securely during use.

Choosing the Correct Hitachi G13SB3 Parts

When looking for Hitachi G13SB3 parts, check the exact model and voltage shown on the machine before ordering. This is especially important for the armature, stator, carbon brushes and electrical components, where multiple versions are listed.

Whether you need a G13SB3 armature, stator, carbon brushes, brush holder, switch, bearing, gear and pinion set, spindle, wheel guard, housing, cable or wheel-fitting component, the parts diagram above provides a useful reference for identifying the correct part.

The G13SB3 is an older Hitachi model that you may also find listed under the later HiKOKI branding. When searching for Hitachi G13SB3 spare parts, the original model number and machine voltage remain important details for matching the correct components.