Hitachi FDV16VB2 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 995-344 | Flat Hd. Screw (a) (left Hand) M6x25 | £1.00 |
|
| 2 | 987-576 | Chuck Wrench For 13vlb-d,13vlr-d | £6.31 |
|
| 3 | 322-625 | Drill Chuck 13vlrj-n (w/ |
£37.71 |
|
| 4 | 316-093 | Spindle | £15.58 |
|
| 5 | 303-651 | Spring | £1.00 |
|
| 6 | 620-1VV | Ball Bearing 6201vvcmps2l | £7.42 |
|
| 7 | 939-542 | Retaining Ring For D12 Shaft (10 Pcs.) | £2.79 |
|
| 8 | 317-482 | Gear | £21.86 |
|
| 9 | 959-149 | Steel Ball D4.76 (10 Pcs.) | £1.00 |
|
| 10 | 319-604 | Change Knob | £2.28 |
|
| 11 | 963-224 | Change Plate | £2.48 |
|
| 12 | 963-226 | Spring (a) | £1.91 |
|
| 13 | 316-094 | Holder | £24.78 |
|
| 14 | 608-VVM | Ball Bearing 608vvc2ps2l | £5.16 |
|
| 15 | 360-327U | Armature Ass'y 110v-120v | £38.36 |
|
| 15 | 360-207E | Armature 220v-230v | £38.35 |
|
| 15 | 360-207F | Armature 230v-240v | £38.36 |
|
| 16 | 340-222E | Stator 220v | £17.20 |
|
| 16 | 340-222F | Stator 230v-240v | £17.20 |
|
| 16 | 340-221 | Stator 100v-120v | £20.52 |
|
| 17 | 626-VVM | Ball Bearing 626vvc2ps2l | £5.22 |
|
| 18 | 322-421 | Housing (a).(b) Set (green) | £42.50 |
|
| 18 | 322-626 | Housing (a).(b) Set (moss Green) | £0.00 |
|
| 20 | 302-086 | Tapping Screw (w/ |
£1.00 |
|
| 21 | 999-041 | Carbon Brush (1 Pair) | £4.06 |
|
| 22 | 955-203 | Brush Holder | £3.83 |
|
| 22 | 930-483 | Brush Holder | £2.12 |
|
| 23 | 322-426 | Choke Coil (blue) | £4.54 |
|
| 23 | 322-427 | Choke Coil (blue) | £0.00 |
|
| 23 | 322-429 | Internal Wire (blue) | £3.13 |
|
| 23 | 322-420 | Internal Wire (blue) | £0.00 |
|
| 24 | 322-418 | Internal Wire (white) | £5.47 |
|
| 25 | 321-632 | Switch (1p Pillar Type) | £29.98 |
|
| 26 | 321-628 | Pushing Button | £2.46 |
|
| 27 | 322-417 | Internal Wire (black) | £3.13 |
|
| 27A |
This part is unavailable
Not Available
|
|||
| 27A |
This part is unavailable
Not Available
|
|||
| 28 | 322-424 | Choke Coil (brown) | £4.54 |
|
| 28 | 322-425 | Choke Coil (brown) | £0.00 |
|
| 28 | 322-428 | Internal Wire (brown) | £3.13 |
|
| 28 | 322-419 | Internal Wire (brown) | £0.00 |
|
| 30 | 303-662 | Cord Armor D8.8 | £1.00 |
|
| 30 | 307-217 | Cord Armor D7.2 | £1.00 |
|
| 31 | 960-266 | Cord Clip | £1.00 |
|
| 32 | 305-812 | Tapping Screw (w/ |
£1.00 |
|
| 33 | 500-447Z | Cord | £7.10 |
|
| 33 | 500-240Z | Cord | £19.41 |
|
| 33 | 500-423Z | Cord | £19.15 |
|
| 33 | 500-439Z | Cord | £41.19 |
|
| 33 | 500-435Z | Cord | £41.19 |
|
| 33 | 500-409Z | Cord | £12.91 |
|
| 33 | 500-461Z | Cord | £14.18 |
|
| 33 | 500-468Z | Cord | £0.00 |
|
| 33 | 500-470Z | Cord | £0.00 |
|
| 33 | 303-667 | Cord | £0.00 |
|
| 34 | 322-416 | Internal Wire (gray) | £3.13 |
|
| 35 | 303-654 | Internal Wire (a) | £1.00 |
|
| 36 | 994-273 | Noise Suppressor | £6.56 |
|
| 37 | 302-488 | Earth Terminal | £1.00 |
|
| 501 | 303-659 | Side Handle | £12.01 |
|
| 502 | 303-709 | Depth Gauge | £1.00 |
|
| 601 | 321-814 | Drill Chuck 13vlrb-d | £0.00 |
Not Available
|
| 602 | 930-515 | Chuck Wrench 10g | £5.76 |
|
| 603 | 315-999 | Case | £50.20 |
|
| 604 | 879-347 | + Driver Bit Set (no.1,2,3) 65l | £7.73 |
|
| 605 | 983-004 | + Driver Bit No.1 65l | £0.00 |
|
| 606 | 983-006 | + Driver Bit No.2 65l | £0.00 |
Not Available
|
| 607 | 983-011 | + Driver Bit No.3 65l | £0.00 |
|
| 608 | 879-350 | - Driver Bit Set (4,5,6mm) 50l | £9.36 |
|
| 608 | 879378 | Sanding Paper Set (g40,60,100,150,220) | £2.54 |
|
| 609 | 992-675 | - Driver Bit (b) 4mmx50 | £4.70 |
|
| 610 | 992-676 | - Driver Bit (b) 5mmx50 | £4.70 |
|
| 611 | 992-677 | - Driver Bit (b) 6mmx50 | £4.70 |
|
The Hitachi FDV16VB2 is a compact 550W impact drill designed for drilling in wood, steel and masonry. It has a 13mm chuck, variable-speed operation, forward and reverse rotation and a two-mode drilling function, making it suitable for a range of workshop and general-purpose applications.
When an older FDV16VB2 develops a fault, there are numerous individual components that can be replaced rather than abandoning the complete drill. Our Hitachi FDV16VB2 spare parts information helps you identify the correct component from the parts diagram and numbered parts list above.
Hitachi FDV16VB2 Parts Diagram
The Hitachi FDV16VB2 parts diagram breaks the drill down into its individual mechanical, electrical and external components. This is particularly useful when repairing an older machine, as many of the smaller components are not easy to identify simply by looking at the assembled drill.
The parts list includes the drill chuck, chuck screw, spindle, springs, bearings, gears, change mechanism, armature, stator, housing, carbon brushes, brush holders, switch, internal wires and power-cord components.
Several components are also available in different voltage versions, so checking the identification label on the drill before ordering FDV16VB2 parts is important.
FDV16VB2 Chuck, Spindle and Gear Parts
The front of the drill contains several components responsible for holding the drill bit and transferring power from the motor to the chuck. The parts breakdown includes the 322-625 13mm drill chuck, 316-093 spindle, 317-482 gear and associated springs, retaining rings and steel balls.
If the chuck is damaged, has excessive movement or is no longer gripping drill bits correctly, replacing the complete chuck may be the appropriate solution. The spindle and internal gear components can also be replaced where wear has developed within the drive mechanism.
The FDV16VB2 chuck is therefore one of the key parts to identify correctly when repairing the front end of the drill.
Hitachi FDV16VB2 Motor and Armature Parts
The motor assembly contains several serviceable components, including the armature, stator and bearings. The original parts list identifies different armatures for different supply voltages, including 360-327U for 110–120V, 360-207E for 220–230V and 360-207F for 230–240V.
The corresponding stators include 340-221, 340-222E and 340-222F.
If your Hitachi FDV16VB2 is losing power, making unusual noises, producing excessive sparking or failing to run, the armature, stator, bearings and brushes are among the components that may need inspection.
FDV16VB2 Carbon Brushes and Electrical Parts
The FDV16VB2 uses replaceable carbon brushes, making the brush assembly an important consideration when diagnosing a drill that has become intermittent or stopped working.
The parts list includes the 999-041 carbon brush pair, along with brush holders such as 955-203 and 930-483. The drill also has a separate 321-632 switch, push button and several internal wires and electrical components.
If your Hitachi FDV16VB2 is not working, worn brushes are worth checking alongside the switch, power cord, internal wiring and motor components. A drill that cuts out under load or only operates intermittently may require attention to one of these electrical components.
Hitachi FDV16VB2 Bearings and Mechanical Parts
Several bearings support the motor and drive mechanism. The parts breakdown includes 620-1VV, 608-VVM and 626-VVM bearings, positioned around the spindle, armature and associated components.
A worn bearing can cause increased noise, vibration or movement and may affect the way the drill operates. The FDV16VB2 also contains smaller components such as the change knob, change plate, spring, holder and retaining ring, which form part of the mechanical drive and operating mechanism.
These smaller Hitachi FDV16VB2 replacement parts can be important when repairing a machine that has been dismantled or used heavily over many years.
FDV16VB2 Switch, Housing and Smaller Parts
The external housing protects the motor and electrical components while also supporting the drill's controls. The parts information identifies 322-421 and 322-626 housing sets, as well as the switch, push button, internal wiring, screws and other fittings.
The correct housing can depend on the particular version of the FDV16VB2, with different colour and production variations appearing in the parts information.
The drill was supplied with accessories including a side handle, depth gauge and carrying case, and the original parts documentation also identifies accessory positions separately from the main drill assembly.
Check Your FDV16VB2 Voltage Before Ordering Parts
The Hitachi FDV16VB2 was produced for different supply voltages, including 110V and 230V versions. This is particularly important when ordering electrical components because the armature and stator part numbers change according to the voltage.
The model has subsequently fallen under the HiKOKI brand following the Hitachi Power Tools rebranding, but Hitachi FDV16VB2 parts remains the important identification when searching for components for this original machine.
Before ordering Hitachi FDV16VB2 spare parts, check the model and voltage information on the drill and compare the required component with the parts diagram above. From the chuck and spindle to the armature, stator, carbon brushes, bearings, switch and smaller mechanical fittings, identifying the exact part number can make repairing this older impact drill considerably easier.