Hitachi Nailer Parts
Find Hitachi nailer parts for a wide range of nail guns, including brad nailers, finish nailers, strip nailers and coil nailers. Our Hitachi nailer spares include the individual mechanical, pneumatic and external components needed to repair a worn or damaged nail gun.
If your Hitachi nailer is jamming, misfiring, not feeding nails, not driving nails fully or losing power, replacing the affected component can often restore the tool without replacing the complete machine.
Hitachi Nail Gun Spare Parts
Hitachi nailers use a wide variety of replaceable components, from the nail-feeding system and magazine through to the piston and driving mechanism. Depending on the model, Hitachi replacement parts can include:
Driver units and driver blades
Pistons and piston rings
Cylinders and cylinder assemblies
Piston bumpers
O-rings, gaskets and seals
Valve pistons and valve bushes
Magazines and magazine covers
Nail feeders and feeder pieces
Nail rails and nail plates
Feed springs and ribbon springs
Pushing levers and pushing lever guides
Blade guides and guide plates
Lock levers and stop levers
Nose caps and nose assemblies
Triggers and trigger springs
Adjusters and adjustment components
Filters and filter covers
Motors and motor mounts
Internal wires and electrical components
Handles, housings and covers
Pins, washers, nuts and screws
Hitachi Brad Nailer Parts
A Hitachi brad nailer is commonly used for trim, mouldings, cabinetry and other finishing work where a smaller nail is required. Models such as the NT50AE and NT50AE2 contain individual parts for the driving and feeding systems, including driver units, cylinders, magazines, nail feeders, feeder pieces and feed springs.
If your brad nailer is leaving nails proud, firing inconsistently or failing to feed correctly, check the driver, magazine and nail-feeding components for wear.
Hitachi Finish Nailer Parts
Hitachi finish nailer parts are available for models such as the NT65M2 and other NT-series nailers. Parts can include blade guides, magazine assemblies, nail rails, nail feeders, pushing mechanisms, valve components and numerous O-rings and seals.
The pneumatic mechanism relies on correctly sealing components to deliver consistent driving force, so worn O-rings, piston components and valve parts can affect performance.
Hitachi Framing & Strip Nailer Parts
For heavier-duty applications, Hitachi produced a range of strip nailers and framing nailers, including the NR90GC and NR83A2. These machines have substantial feeding and driving mechanisms, with replacement parts including magazines, pushing levers, feeders, springs, filters, motors, motor mounts and other internal components.
When a framing nailer starts feeding nails unevenly or develops a fault in the driving system, identifying the individual worn component can be more economical than replacing the complete nail gun.
Hitachi Nailer Magazines & Nail Feeders
The magazine is responsible for holding and positioning the nails before they enter the firing mechanism. Hitachi nailer magazine parts include magazines, magazine covers, nail rails, nail plates, nail feeders, feeder pieces, feeder springs and pushing levers.
A damaged feeder or worn spring can cause nailer jams and feeding problems, while a damaged magazine or guide can prevent nails from being positioned correctly. Hitachi parts lists show these components as individual replaceable items on several models.
Hitachi Nailer Pistons, Cylinders & O-Rings
The driving section is another important area when looking for Hitachi nail gun replacement parts. Depending on the model, this can include pistons, piston rings, cylinders, bumpers, driver units, valve pistons and a large selection of O-rings and gaskets.
Models such as the NT50AE2 and NT50GS have numerous seals and pneumatic components available separately, making it possible to repair individual sections of the nailer rather than replacing the entire assembly.
Hitachi Gas & Pneumatic Nailer Spares
Hitachi produced both pneumatic and gas-powered nailers, each with different replacement requirements. Gas nailers such as the NR90GC can contain components including filters, motor assemblies, motor mounts, pushing mechanisms and magazine parts, while pneumatic nailers have extensive ranges of valves, pistons, cylinders and seals.
Choosing the correct Hitachi nailer spares therefore starts with identifying the exact model number.
Hitachi Nailer Parts by Model
Our Hitachi nailer parts online range covers a selection of popular nail guns, including:
Hitachi NT50AE
Hitachi NT50AE2
Hitachi NT50GS
Hitachi NT65M2
Hitachi NR83A2
Hitachi NR90GC
Hitachi NR90GC2
Hitachi NV83A2
Hitachi NV50A1
Hitachi NR1890DC
Hitachi NR1890DBCL
Different versions can use different magazines, drivers, feeders, cylinders and seals, even when the tools look similar. Always check the complete model number against the relevant Hitachi parts diagram and parts list before ordering.
Hitachi & HiKOKI Nailer Parts
From Hitachi nail gun parts for an older pneumatic brad nailer to replacement components for a cordless or gas-powered nailer, finding the correct individual spare can help keep your equipment working for longer.
Selected HiKOKI nailer spares are also available, giving you another route to finding the correct component for compatible models.
Buy Hitachi Nailer Parts Online
Looking for Hitachi nailer replacement parts? Select your model to see the available spares and identify the correct part number.
Whether you need a Hitachi nailer magazine, nail feeder, driver blade, piston, cylinder, O-ring, blade guide, pushing lever, spring or valve component, our model-specific parts listings make it easier to find the right spare for your nail gun.