Skip to main content

We are currently experiencing substantial delays with Hitachi/HiKOKI and Metabo spare parts due to the two brands merging warehouse. At this moment in time we are unable to provide confirmed delivery dates on out of stock parts, for any urgent requirements please contact us prior to ordering.

Hitachi Nibbler Parts

Find Hitachi nibbler parts for repairing and maintaining your sheet metal cutting tool. Our range of Hitachi nibbler spares and replacement parts includes cutting components, drive parts, electrical components and the smaller fittings used inside the machine.


A nibbler can experience considerable wear around the cutting mechanism, particularly when regularly cutting sheet steel. If your Hitachi nibbler is producing a poor cut, struggling to cut material or has developed a mechanical or electrical fault, replacing the affected part can help restore its performance.


Hitachi Nibbler Spare Parts


Hitachi nibblers are made up of a number of individual components, many of which can be replaced separately. Depending on the model, Hitachi nibbler replacement parts can include:

  • Punches

  • Dies and die assemblies

  • Die holders

  • Pistons

  • Punch retaining screws

  • Gear and pinion sets

  • Gear covers

  • Inner covers

  • Ball bearings

  • Bearing locks

  • Armatures

  • Stators

  • Carbon brushes

  • Brush holders

  • Brush caps

  • Switches

  • Switch levers

  • Power cords

  • Cable protectors

  • Handles and housings

  • Washers, screws and other small fittings


Hitachi Nibbler Punch & Die Parts


The punch and die are the main cutting components in a Hitachi nibbler and are subject to wear during normal use. Hitachi's CN16SA documentation recommends checking these parts regularly and replacing them when they become worn.


A worn punch or die can reduce cutting efficiency and make it harder to achieve a clean, consistent cut. For this reason, Hitachi nibbler punch and die replacement parts are some of the most important spares to check when servicing the cutting mechanism.


Make sure the punch, die and die holder are matched to your exact model, as different nibbler designs use different components.


Hitachi Sheet Metal Nibbler Parts


A sheet metal nibbler is designed to cut sheet material by repeatedly punching through the metal rather than removing it with a conventional blade. Hitachi nibblers such as the CN16SA are designed for cutting materials including mild steel, stainless steel and aluminium within their specified capacities.


If your nibbler is becoming difficult to control, cutting slowly or leaving an uneven edge, inspect the punch, die and associated cutting mechanism for wear before looking at the motor and electrical components.


Hitachi Nibbler Piston & Drive Parts


Behind the cutting head, the piston and drive mechanism convert the motor's rotation into the rapid movement needed to operate the punch. Hitachi parts listings include pistons, gears, pinions, gear covers, inner covers, bearings and bearing locks for the CN16 range.


Damage or wear in these components can lead to excessive noise, vibration or a reduction in cutting performance. Individual drive components can often be identified through the model-specific Hitachi parts diagram and parts list.


Hitachi Nibbler Carbon Brushes & Motor Parts


The motor is another area where replacement components may be required. Hitachi nibblers use carbon brushes, which are consumable parts and should be inspected as they wear. The CN16SA documentation specifically provides for carbon brush inspection and replacement.


Depending on the model, Hitachi nibbler parts can include carbon brushes, brush holders, brush caps, armatures, stators, switches, bearings and power cords. If the nibbler is sparking, losing power or refusing to start, these components may be worth checking.


Hitachi Nibbler Gears, Bearings & Internal Components


The cutting mechanism relies on a series of gears and bearings to transfer power from the motor to the piston. Worn Hitachi nibbler gears and bearings can result in increased noise, vibration or movement within the drive system.


Parts such as gear covers, pinion and gear sets, ball bearings, bearing locks and inner covers are available for selected Hitachi nibbler models, allowing individual components to be replaced where appropriate.


Hitachi Nibbler Parts by Model


Our Hitachi nibbler parts online range includes parts for models such as:

  • Hitachi CN16

  • Hitachi CN16SA

  • Hitachi CN16E4

  • Hitachi CN16E4M

  • Hitachi CN16SAM


The CN16SA is a 16-gauge sheet metal nibbler, while the wider CN16 family includes several closely related versions. Components can differ between models, so always check the exact model number before ordering your spare parts.


Hitachi & HiKOKI Nibbler Spares


From a replacement punch or die to carbon brushes, bearings, gears or electrical components, individual Hitachi nibbler spares can help extend the working life of a well-used metal cutting tool.


Selected HiKOKI nibbler parts are also available, providing additional options when looking for compatible replacement components.


Buy Hitachi Nibbler Parts Online


Looking for Hitachi nibbler replacement parts? Select your model to see the available spares and identify the correct component.


Whether you need a Hitachi nibbler punch, die, die holder, piston, gear, bearing, carbon brush, armature, switch or other replacement part, our model-specific parts listings make it easier to find the correct spare for your machine.

Example exploded parts diagram for a Hitachi Nibbler
Example parts diagram