Makita Circular Saw Parts
A good circular saw is built to handle demanding cutting work, but even a well-maintained Makita circular saw will eventually need replacement components. From worn brushes and bearings to damaged guards, switches and adjustment mechanisms, finding the correct Makita circular saw parts can keep a reliable saw in service for much longer.
We stock parts for a wide range of Makita circular saw models. Select your model above to view its Makita parts diagram and parts list, then use the reference numbers to identify the component you need.
Parts for Makita Circular Saws
Different Makita circular saws use different combinations of components, so always work from the diagram for your particular model. Depending on the machine, Makita circular saw spares can include:
Carbon brushes and brush holders
Armatures and field coils
Bearings and bushes
Spindles and blade mounting parts
Blade guards and guard mechanisms
Switches and power cables
Base plates and guide components
Depth adjustment parts
Bevel adjustment components
Gears and drive parts
Handles, covers and housings
Springs, washers, screws and other small fittings
These individual components can be useful whether you're carrying out a straightforward repair or restoring an older Makita saw.
Common Circular Saw Faults
The symptoms of a faulty circular saw can vary considerably. Excessive sparking, loss of power or intermittent operation can point towards worn carbon brushes, a damaged armature, switch or another electrical component.
Mechanical problems tend to show themselves differently. Blade wobble, unusual noise and excessive vibration may require inspection of the spindle, bearings, blade mounting components or drive system.
If the saw is cutting at the wrong depth or angle, the problem could instead be within the adjustment mechanism or base assembly.
Makita Circular Saw Blade and Spindle Parts
The spindle and blade mounting assembly need to keep the blade secure and running true. If you have noticed movement around the blade or difficulty fitting it correctly, inspect the spindle, flange, washers and associated fixing components.
It's also worth remembering that poor cutting performance isn't necessarily caused by the motor. A worn blade, damaged guide component or problem with the blade mounting system can all affect the finished cut.
Guards and Adjustment Mechanisms
The blade guard is an important part of the saw and should operate smoothly throughout the cutting cycle. Damage, stiffness or a failure to return correctly should be investigated before continuing to use the machine.
The depth and bevel adjustment mechanisms are equally important for accurate work. Worn levers, brackets, stops or locking components can make it difficult to maintain the selected setting.
The parts diagram allows these smaller components to be identified individually where replacements are available.
Electrical and Motor Components
If your Makita circular saw won't start, cuts out under load or runs poorly, check the electrical and motor components rather than immediately assuming the complete motor needs replacing.
Carbon brushes are common wear items, while bearings, armatures, field coils and switches can also develop faults after prolonged use. Identifying the specific failed component can make the repair considerably more economical.
Choosing the Right Makita Circular Saw Replacement Part
Model numbers are particularly important when ordering Makita circular saw replacement parts. Components from two similar-looking saws may not be interchangeable, even if they share the same basic design.
Start by selecting your exact model and looking through the Makita circular saw parts diagrams. Once you've located the component, the accompanying parts list can be used to check its reference and part number.
Whether you're looking for Makita circular saw carbon brushes, armature, bearing, blade guard, spindle, switch, adjustment component or a small fixing, the model-specific parts information gives you a much better chance of finding the correct item first time.
Browse the available Makita circular saw parts online and select your saw model to get started.