Skip to main content

Makita DBO180 Parts

1 265995-6
TAPPING SCREW 4X18
£1.00
HOUSING SET
£14.85
RUBBER PIN 6 DUR/DHR/DTW/DG
£1.00
DBO180 NAME PLATE
£1.00
SWITCH PLATE COMPLETE
£3.05
SWITCH UNIT
£10.95
CONTROLLER UNIT
£31.35
Line Filter
£1.00
TERMINAL DUR182/DHR165/DKP180
£3.35
PAN HD SCREW M4X20 9032/LS081
£1.00
SKIRT SET
£3.85
DC MOTOR
£16.65
MOTOR BRACKET
£1.95
PAN HD SCREW M3X8 BCL140/180
£1.00
PULLEY 7.5-24.1
£12.65
HEX NUT M6 9564/65CV/DZ&H
£1.00
EXT DIN 471 CIRCLIP-7 BTM50
£1.00
BALL BEARING 607ZZ BO3710/MT4
£1.00
SPINDLE
£4.55
BALL BEARING VC3211M/3612/C/
£6.25
PULLEY 7.5-40.3
£14.35
SYNCHRO BELT 6-174
£5.65
FAN 88
£6.15
THIN BLUE WASHER 15 HS0600
£1.00
BEARING BOX BO5041/30/BO5031
£2.35
BALL BEARING 6202DDW BO3710/1
£7.25
BRAKE RING BO5041/30/31/M9204
£4.25
BEARING BOX COVER BO5041/5031
£1.00
LARGE HARD WASHER 4 6510SB/BO
£1.00
PAN HEAD SCREW M4X16 BHX2501
£1.00
PAD 123 BO5041/10/5012/5021/31
£29.55

The Makita DBO180 is an 18V LXT cordless random orbit sander with a 125mm sanding disc, three electronic speed settings and a 2.8mm orbit. Its compact design and through-the-pad dust collection make it suited to both general preparation and finer finishing work, while the cordless format makes it convenient for workshop and site use.

If your Makita DBO180 is not working, has developed a fault with the motor or switch, is making unusual noises, or the sanding pad is no longer running correctly, individual DBO180 spare parts can be identified from the parts diagram and list above.

Makita DBO180 Parts Diagram and Parts List

The DBO180 parts diagram shows the main housing, electrical controls, motor, drive mechanism and sanding pad assembly. It is particularly useful for identifying the smaller internal components that are difficult to identify from the outside of the sander.

The parts list includes the housing set, switch plate, switch unit, controller, battery terminal, skirt set, DC motor, motor bracket, pulleys, bearings, spindle, synchronised belt, fan, bearing box, brake ring and sanding pad.

There are also numerous screws, washers, nuts and retaining components listed individually, making the diagram useful when carrying out a detailed repair.

DBO180 Motor and Electrical Parts

The DBO180 uses a 629952-2 DC motor controlled by an electronic controller. The current parts information also identifies controller references including 638982-2, while earlier service information shows 638789-6 and an updated controller reference 632M22-6.

If the DBO180 has power but will not run, the switch, controller, battery terminal and motor are among the components that may need checking. The 620115-3 switch unit and 644808-8 terminal are separately listed, allowing individual electrical components to be replaced where appropriate.

Because the DBO180 uses electronic speed control, a fault affecting the controller can produce symptoms that initially appear to be a motor problem.

DBO180 Switch and Speed Control

The DBO180 uses a one-touch electronic speed control system with three operating speeds. The parts breakdown identifies the 141419-5 switch plate complete and 620115-3 switch unit, together with the controller responsible for the electronic operation.

If the Makita DBO180 switch is not working, the external switch plate and internal switch unit should both be considered. A sander that switches on but does not respond correctly to the speed control may require investigation of the controller and associated connections.

The switch and controller are contained within the upper housing, so damage to the housing or internal mounting points can also affect the controls.

DBO180 Motor, Pulley and Belt Parts

The motor drives the sanding mechanism through a pulley and synchronised belt arrangement. The parts list identifies 222175-7 pulley 7.5-24.1, 222176-5 pulley 7.5-40.3 and 225095-4 synchro belt 6-174.

If the DBO180 motor is running but the sanding pad is not moving correctly, the pulleys, belt, spindle and associated bearings should be inspected. A damaged or worn belt can affect power transfer and may be accompanied by unusual noise or movement from the lower part of the sander.

The 453632-6 motor bracket supports the motor within the housing and is also available as an individual component.

DBO180 Spindle, Bearings and Brake Parts

The rotating sanding assembly contains several bearings and supporting components. The parts breakdown includes 326168-7 spindle, 210062-2 ball bearing 607ZZ, 211092-6 ball bearing, 211228-7 ball bearing 6202DDW and 318304-9 bearing box.

The DBO180 also uses 424131-5 brake ring, which works with the sanding pad assembly to control free spinning of the pad.

If the DBO180 is noisy or has excessive movement, the spindle and bearings are worth checking. A worn bearing can affect smooth operation and may produce vibration or noise even when the motor itself is functioning correctly.

DBO180 Sanding Pad and Skirt Parts

The sanding pad is one of the most heavily handled components of a random orbit sander. The DBO180 parts information identifies 743081-8 pad 123, along with the 187360-8 skirt set surrounding the lower assembly.

If the DBO180 sanding pad is damaged, no longer holds abrasive discs correctly or has developed excessive movement, the pad and associated spindle and mounting components should be inspected.

The sander uses 125mm abrasive paper on a 123mm backing pad, with hook-and-loop abrasives designed for quick changes between grades.

DBO180 Dust Collection Components

Dust collection is built into the DBO180 through holes in the sanding pad, directing sanding debris into the collection system or towards a connected vacuum. Makita also specifies a dust-sealed switch and bearing arrangement on the model.

The parts system includes the 187360-8 skirt set and associated lower housing components. External dust collection accessories such as the dust bag and nozzle can also be relevant when replacing worn or damaged parts.

If dust is escaping around the pad or collection performance has deteriorated, check the skirt, pad, dust passages and collection accessories rather than assuming the motor is at fault.

Identifying the Correct Makita DBO180 Parts

When searching for Makita DBO180 parts online, match the component against the parts diagram and original Makita part number before ordering. Some components have been superseded by updated references, particularly within the electronic controller assembly, so checking the latest parts information is worthwhile.

From the DBO180 DC motor and controller to the switch, battery terminal, pulleys, synchronised belt, spindle, bearings, brake ring, sanding pad and skirt assembly, the detailed parts list makes it easier to identify the individual component required for your sander.

Using the original part number is the most reliable way to select the correct DBO180 spare parts when carrying out a repair.