Makita DGA452 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 619218-8 | ARMATURE BGA452 | £14.85 |
|
| 2 | 317821-6 | GEAR HOUSING COVER BPJ140/ |
£3.15 |
|
| 3 | 213445-5 | O-RING 26 BPJ140/ |
£1.00 |
|
| 4 | 961005-4 | EXT DIN 471 CIRCLIP-9 BGA450 | £1.00 |
|
| 5 | 210042-8 | BALL BEARING 629LLB BPJ140/ |
£2.85 |
|
| 6 | 227501-5 | SPIRAL BEVEL GEAR 19 | £10.25 |
|
| 7 | 417771-6 | PIN CAP BPJ140/ |
£1.00 |
|
| 8 | 233072-2 | COMPRESSION SPRING 8 BGA450 | £1.00 |
|
| 9 | 266361-0 | TAPPING SCREW 4X30 BGA454/ |
£1.00 |
|
| 10 | 213960-9 | O RING 5 DGA463/ |
£4.45 |
|
| 11 | 256496-5 | SHOULDER PIN 4 | £2.15 |
|
| 12 | 318051-2 | GEAR HOUSING DGA452/ |
£5.35 |
|
| 13 | 263002-9 | RUBBER PIN 4 GA7050/ |
£1.00 |
|
| 14 | 210033-9 | BALL BEARING 696ZZ DGA454/ |
£1.75 |
|
| 15 | 961052-5 | EXT DIN 471 CIRCLIP-12 EM2651 | £1.00 |
|
| 16 | 253744-3 | HARD WASHER 12 2414/ |
£1.00 |
|
| 17 | 227502-3 | SPIRAL BEVEL GEAR 39 DGA452 | £7.65 |
|
| 18 | 962151-6 | RETAINING RING R-32 BPJ140/ |
£1.00 |
|
| 19 | 211129-9 | BALL BEARING 6201DDW BPJ140/ |
£7.25 |
|
| 20 | 267238-2 | FLAT WASHER 12 BGA450/ |
£1.00 |
|
| 21 | 213622-9 | O RING 45 BGS450/ |
£1.00 |
|
| 22 | 318331-6 | BEARING BOX 9553NB/ |
£3.05 |
|
| 23 | 911121-2 | PAN HD SCREW M4X14 9BGA450/ |
£1.00 |
|
| 24 | 345464-4 | LABYRINTH RING PC5000/ |
£1.00 |
|
| 25 | 254011-9 | WOODRUFF KEY 4-8 BGA450/ |
£1.00 |
|
| 26 | 324489-1 | SPINDLE BGA450/ |
£2.85 |
|
| 27 | 265180-1 | PAN HD SCREW M5X16 GA5021/ |
£1.00 |
|
| 28 | 123098-1 | WHEEL COVER ASSY BGA450/ |
£7.75 |
|
| 29 | 224415-9 | INNER FLANGE 42 GA7050/ |
£5.95 |
|
| 30 | 224554-5 | LOCK NUT | £4.25 |
|
| 31 | 631714-6 | LED CIRCUIT BDG800/ |
£7.35 |
|
| 32 | 638627-2 | YOKE UNIT BGA/ |
£24.55 |
|
| 33 | 638921-2 | ENDBELL COMP DDG800/ |
£3.75 |
|
| 34 | 815H70-2 | NAME PLATE DGA452 | £1.00 |
|
| 35 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 36 | 419566-3 | SWITCH KNOB BPJ140/ |
£1.00 |
|
| 37 | 187843-8 | HOUSING SET | £14.45 |
|
| 38 | 419519-2 | SWITCH LEVER BPJ140/ |
£1.75 |
|
| 39 | 650579-7 | SWITCH 1246.3223 DJS160/ |
£7.25 |
|
| 40 | 620243-4 | CONTROLLER DGA452/ |
£35.35 |
|
| 41 | 644808-8 | TERMINAL DUR182/ |
£3.35 |
|
| 42 | 187843-8 | HOUSING SET | £14.45 |
|
| 43 | 191971-3 | CARBON BRUSH SET CB-430 (Pair) | £4.45 |
|
| 44 | 643954-4 | HOLDER CAP BPJ140/ |
£1.00 |
|
| 45 | 419518-4 | HOLDER CAP COVER BPJ140/ |
£1.00 |
|
| 1001 | 153489-2 | Angle Grinder Side Handle BGA450/ |
£2.04 |
|
| 1002 | 782423-1 | LOCK NUT WRENCH 35 GA5020/ |
£2.38 |
|
| 1003 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1004 | 194204-5 | Battery Pack, Lithium-ion, 18V, 5.0Ah | £231.70 |
|
| 1004 | 196399-0 | Price on application | £236.96 |
|
| 1005 | 821550-0 | STACKING CASE TYPE 2 157MM | £60.34 |
|
| 1005 | 141257-5 | PLASTIC CARRYING CASE | £45.96 |
|
| 1006 | A-80640 | Aluminium Oxide Discs - Makita Flap Discs at RS | £2.30 |
|
| 1007 | 837632-8 | INNER TRAY | £11.74 |
|
| 1008 | 450128-8 | BATTERY COVER BDG800/ |
£1.00 |
|
| 1009 | 803C70-4 | LABEL/ |
£1.85 |
|
| 1009 | 803C92-4 | LABEL/ |
£1.85 |
|
| 1009 | 803C93-2 | LABEL/ |
£1.85 |
|
| 1010 | 803C94-0 | LABEL/ |
£1.85 |
|
| 1010 | 803C95-8 | LABEL/ |
£1.85 |
|
| 1010 | 803D23-9 | LABEL/ |
£1.85 |
|
| 5002 | 805459-4 | SAFETY INSTRUCTION LABEL BGA45 | £1.00 |
|
Makita DGA452 Spare Parts
The Makita DGA452 is a compact 18V LXT angle grinder with a 115mm disc capacity and a no-load speed of up to 11,000 rpm. Its relatively small body makes it comfortable to handle, while features such as electronic overload protection and anti-restart protection make it a practical grinder for cutting and grinding work.
As a grinder is often exposed to dust, metal particles and considerable vibration, some components can naturally wear over time. Fortunately, the DGA452 has a number of individually replaceable parts, so a fault doesn't necessarily mean replacing the complete tool. The Makita DGA452 parts drawing and list above can be used to identify the component you need.
DGA452 Carbon Brushes and Motor Repairs
One of the most common maintenance jobs on the DGA452 is replacing its carbon brushes. The grinder uses CB-430 brushes, and Makita recommends checking them regularly and replacing them when they reach the wear limit. Symptoms of worn brushes can include intermittent running, reduced power, excessive sparking or difficulty starting.
If replacing the brushes doesn't resolve a motor problem, other components can be investigated. The parts breakdown includes the armature, yoke unit, bearings, fan and endbell, allowing individual motor components to be replaced where available.
Grinding Noise or Excessive Vibration?
A DGA452 that suddenly starts making a grinding, rattling or squealing noise may have a problem within the drive assembly. The grinder contains several serviceable components around the gearbox, including ball bearings, spiral bevel gears, the bearing box, spindle and retaining rings.
Excessive vibration can also be a reason to inspect the grinder's mechanical components, particularly if the problem has appeared suddenly. Continuing to use a grinder with a suspected mechanical fault isn't recommended, so the source of the noise or vibration should be established before carrying on with work.
DGA452 Switch, Controller and Other Parts
Not every DGA452 fault is related to the motor. If the grinder won't start or is behaving intermittently, the switch, switch lever, controller and battery terminal are among the individual electrical components shown in the parts breakdown.
The DGA452 also has replaceable housing components, a side handle, spindle components, gear housing parts and various smaller springs, O-rings, screws and retaining rings. This makes the parts diagram particularly useful when repairing an older grinder where several small components may have become worn or damaged.
Find Makita DGA452 Replacement Parts
Use the Makita DGA452 exploded parts diagram above to locate the component you're looking for, then match its reference number to the parts list. Checking the exact Makita part number is important, particularly where similar components are used elsewhere in the grinder.
Whether you're looking for Makita DGA452 carbon brushes, an armature, bearing, gear, spindle, switch, controller, housing component or another spare, the drawing above provides a model-specific guide to the available parts.
If you're searching for Makita DGA452 parts, DGA452 replacement parts, Makita DGA452 spares or DGA452 parts online, browse the drawing and parts list above to find the component required for your repair.