Makita DGA463 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 629298-6 | STATOR COMPLETE | £132.75 |
|
| 2 | 210169-4 | BALL BEARING 607LLB | £1.00 |
|
| 3 | 510329-1 | ROTOR ASSY DGA456/ |
£29.55 |
|
| 4 | 135930-7 | GEAR HOUSING COVER ASSY DGA463 | £4.45 |
|
| 5 | 213445-5 | O-RING 26 BPJ140/ |
£1.00 |
|
| 6 | 210042-8 | BALL BEARING 629LLB BPJ140/ |
£2.85 |
|
| 7 | 227541-3 | SPIRAL BEVEL GEAR 10 DGA454/ |
£3.35 |
|
| 8 | 252186-8 | HEX NUT M6 BUC250/ |
£1.00 |
|
| 9 | 417771-6 | PIN CAP BPJ140/ |
£1.00 |
|
| 10 | 233072-2 | COMPRESSION SPRING 8 BGA450 | £1.00 |
|
| 11 | 266361-0 | TAPPING SCREW 4X30 BGA454/ |
£1.00 |
|
| 12 | 213960-9 | O RING 5 DGA463/ |
£4.45 |
|
| 13 | 256546-6 | SHOULDER PIN 4 DGA454/ |
£1.00 |
|
| 14 | 135929-2 | GEAR HOUSING ASSY DGA463/ |
£9.65 |
|
| 15 | 263002-9 | RUBBER PIN 4 GA7050/ |
£1.00 |
|
| 16 | 210033-9 | BALL BEARING 696ZZ DGA454/ |
£1.75 |
|
| 17 | 233950-6 | RING SPRING 11 BPJ140/ |
£1.00 |
|
| 18 | 227641-9 | *SPIRAL BEVEL GEAR 37 DGA454/ |
£6.65 |
|
| 19 | 962151-6 | RETAINING RING R-32 BPJ140/ |
£1.00 |
|
| 20 | 211129-9 | BALL BEARING 6201DDW BPJ140/ |
£7.25 |
|
| 21 | 262153-5 | FELT RING 16 GA7050 GA9050 | £1.00 |
|
| 22 | 213622-9 | O RING 45 BGS450/ |
£1.00 |
|
| 23 | 135949-6 | BEARING BOX ASSY DGA463-DGA517 | £4.85 |
|
| 24 | 911121-2 | PAN HD SCREW M4X14 9BGA450/ |
£1.00 |
|
| 25 | 962105-3 | INTERNAL RETAINING RING-26/ |
£1.00 |
|
| 26 | 326672-6 | SPINDLE DGA456/ |
£6.35 |
|
| 27 | 123144-0 | TOOLLESS WHEEL COVER 115AK A | £9.25 |
|
| 27 | 213009-5 | O RING 4 DGA463-DGA517/ |
£1.00 |
|
| 27 | 265180-1 | PAN HD SCREW M5X16 GA5021/ |
£1.00 |
|
| 28 | 224447-6 | INNER FLANGE 42B GA4541/ |
£5.85 |
|
| 29 | 224554-5 | LOCK NUT | £4.25 |
|
| 30 | 853X41-7 | DGA463 NAME PLATE | £1.00 |
|
| 31 | 266326-2 | TAPPING SCREW M4X18 EBH253/ |
£1.00 |
|
| 32 | 455450-8 | DUST COVER R DGA454/ |
£3.65 |
|
| 41 | 183H83-4 | HOUSING SET | £11.25 |
|
| 41 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 34 | 455447-7 | SWITCH KNOB DGA454/ |
£1.00 |
|
| 35 | 455446-9 | SWITCH LEVER DGA454/ |
£1.00 |
|
| 36 | 455448-5 | LEVER DGA454/ |
£1.00 |
|
| 37 | 231679-8 | TORSION SPRING 2 DGA454/ |
£1.00 |
|
| 38 | 268330-7 | PIN 2 DGA454/ |
£1.00 |
|
| 39 | 142901-7 | INDICATOR PANEL CO DGA454/ |
£1.00 |
|
| 40 | 650579-7 | SWITCH 1246.3223 DJS160/ |
£7.25 |
|
| 42 | 455449-3 | DUST COVER L DGA454/ |
£3.65 |
|
| 43 | 643874-2 | TERMINAL DTM52 | £3.65 |
|
| 46 | 853X43-3 | DGA463 SERIAL NO. LABEL | £0.00 |
|
| 47 | 310514-4 | LEAD FLANGE GA4541/ |
£10.05 |
|
| 48 | 816D93-9 | LABE/ |
£1.00 |
|
The Makita DGA463 is an 18V LXT cordless angle grinder with a 115mm disc capacity and brushless motor. Compact enough for general grinding and cutting work, it incorporates Makita's Automatic Torque Drive Technology, Active Feedback sensing, electronic brake and anti-restart protection. The brushless motor also removes the need for conventional carbon brush replacement.
If your Makita DGA463 is not working, has stopped under load, is making unusual noises or has developed a fault with the gearbox, spindle, switch or battery connection, individual components can be replaced. Our Makita DGA463 spare parts cover the motor, gears, bearings, spindle, housing, switch and other mechanical and electrical components.
Makita DGA463 Parts Diagram & Parts List
The Makita DGA463 parts diagram provides a detailed breakdown of the 115mm cordless grinder and its individual components. It is particularly useful for identifying smaller parts that can be difficult to distinguish when the machine is assembled.
The parts list includes the stator, rotor, gear housing, bevel gears, bearings, spindle, wheel cover, inner flange, lock nut, housing set, dust covers, switch knob and battery terminal. Numerous screws, O-rings, springs, pins and retaining rings are also listed individually.
Matching the numbered position on the diagram with the corresponding part number makes it easier to identify the correct DGA463 parts for your repair.
DGA463 Brushless Motor, Rotor & Stator Parts
The DGA463 uses a brushless motor, so there are no conventional carbon brushes to wear out and replace. Instead, the motor assembly incorporates electronic control together with the rotor and stator.
The parts breakdown identifies 629298-6 stator complete and 510329-1 rotor assembly, along with supporting bearings including 210169-4. Some listings also identify alternative stator components, so checking the exact part number before ordering is important.
If your DGA463 has power but will not run, stops unexpectedly or has developed a motor-related fault, the battery and terminal should first be ruled out before investigating the motor and electronic assemblies.
Makita DGA463 Gearbox & Bearing Parts
The gearbox transfers power from the brushless motor to the spindle and contains several gears and bearings that can be affected by heavy use. Excessive noise, vibration or unusual resistance can indicate that the drive system requires inspection.
Replacement DGA463 gearbox parts include the gear housing cover assembly 135930-7, gear housing assembly 135929-2, spiral bevel gear 10 227541-3, spiral bevel gear 37 227641-9 and bearing box assembly 135949-6.
The parts list also includes several bearings, O-rings, retaining rings and other components used to support and seal the gearbox. Replacing an individual worn component can avoid unnecessarily replacing the complete assembly.
DGA463 Spindle, Wheel Cover & Disc Parts
The spindle transfers the gearbox output to the grinding or cutting disc. The DGA463 parts breakdown identifies 326672-6 spindle, together with the inner flange, lock nut and wheel cover components.
The grinder is designed for 115mm discs and uses an M14 spindle thread. A toolless wheel cover assembly, 123144-0, is listed in the parts information.
If the DGA463 spindle is damaged, the disc does not run correctly or the wheel guard has suffered damage, the spindle, flange, lock nut and guard should be checked against the parts diagram.
DGA463 Switch & Battery Terminal Parts
The DGA463 includes a slide-style control arrangement and electronic protection systems. The parts breakdown identifies 455447-7 switch knob, alongside the battery connection components.
The 643874-2 terminal provides the connection between the LXT battery and the grinder. Dust covers are also fitted around the housing and battery area to help protect the internal components.
If your Makita DGA463 will not switch on, check the battery and terminal connection before investigating the internal electronics. A damaged terminal or switch component can prevent normal operation even when the battery is fully charged.
DGA463 Housing, Dust Covers & Small Parts
The grinder's housing protects the brushless motor, gearbox and electronic components from the conditions encountered during grinding. The parts list includes 183H83-4 housing set, left and right dust covers, rubber pins and a range of screws and fasteners.
Smaller Makita DGA463 replacement parts include O-rings, compression springs, shoulder pins, retaining rings, bearings and screws. These components can be important when carrying out a detailed repair or rebuilding a grinder that has been dismantled.
Ordering the Right Makita DGA463 Parts
When searching for Makita DGA463 parts online, check the model marking carefully and match the required component with the part number shown in the parts list. The DGA463 shares some components with other Makita cordless grinders, but this does not mean that every visually similar part is interchangeable.
Whether you need a DGA463 rotor, stator, bearing, bevel gear, spindle, wheel cover, switch, battery terminal, housing component or smaller mechanical part, the parts diagram provides a useful reference for identifying the correct item.
Using the appropriate Makita DGA463 spare parts allows individual worn or damaged components to be replaced while keeping the rest of the 18V LXT angle grinder in service.