Makita DJV181 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 4 | 187704-2 | HOUSING SET DJV141/ |
£21.45 |
|
| 4 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 4 | 801V48-5 | LABEL/ |
£2.15 |
|
| 2 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 3 | 814S24-2 | DJV181 NAME PLATE | £1.00 |
|
| 7 | 632A96-5 | SWITH UNIT DJV142/ |
£19.85 |
|
| 8 | 266034-5 | CT SCREW M4X16 HS6100/ |
£1.00 |
|
| 9 | 142112-4 | GEAR HOUSING COVER COMP DJV | £11.45 |
|
| 10 | 326302-9 | SAFETY WIRE DJV MODELS | £1.00 |
|
| 11 | 911104-2 | PAN HEAD SCREW M4X6 DJV MODEL | £1.00 |
|
| 12 | 454483-0 | TOOL OPENER DJV MODELS | £2.05 |
|
| 13 | 265026-1 | SHOULDER SCREW M4 3901/ |
£1.95 |
|
| 14 | 231659-4 | TORSION SPRING 6 4340/ |
£1.00 |
|
| 15 | 346687-7 | LINEAR GUIDE DJV MODELS | £4.95 |
|
| 16 | 232207-2 | LEAF SPRING 4340/ |
£1.00 |
|
| 17 | 911111-5 | PAN HEAD SCREW M4X10 BO3710/ |
£1.00 |
|
| 18 | 256117-9 | PIN 2 4340/ |
£1.00 |
|
| 19 | 214031-5 | PLANE BEARING 4 6913DW/ |
£1.00 |
|
| 20 | 961017-7 | EXT E-RING JIS JE-3 BPJ140/ |
£1.00 |
|
| 21 | 310548-7 | *SLIDER DJV MODELS | £13.45 |
|
| 22 | 268090-1 | PIN 4 4340/ |
£1.95 |
|
| 23 | 442195-7 | GASKET DJV MODELS | £2.15 |
|
| 26 | 267854-0 | CAP WASHER 8 DJV MODELS | £1.00 |
|
| 25 | 421815-6 | DUST SEAL 8 BJV140/ |
£1.00 |
|
| 27 | 424569-4 | DUST COVER DJV MODELS | £1.00 |
|
| 28 | 962063-3 | RETAINING RING R-13 JV0600K/ |
£1.00 |
|
| 29 | 165724-6 | ROD DJV MODELS | £17.35 |
|
| 30 | 257347-5 | RING 21 DJV MODELS | £2.05 |
|
| 31 | 233591-8 | TORSION SPRING 10G JV0600K | £1.00 |
|
| 32 | 233314-4 | COMPRESSION SPRING 4 6827 | £1.00 |
|
| 33 | 310485-5 | LOCKPIN JV0600K/ |
£4.75 |
|
| 34 | 310547-9 | BLADE HOLDER DJV MODELS | £7.25 |
|
| 35 | 256528-8 | PIN 2 JV0600K | £1.00 |
|
| 36 | 961002-0 | RETAINING RING S-6 M9502R | £1.00 |
|
| 37 | 253715-0 | HARD WASHER 6 EA3500/ |
£1.00 |
|
| 38 | 212014-9 | *NEEDLE BEARING 407 43SB/ |
£8.45 |
|
| 39 | 142109-3 | GEAR COMP DJV MODELS | £27.75 |
|
| 40 | 313260-8 | BALANCE PLATE DJV MODELS | £6.95 |
|
| 41 | 346688-5 | PUSH PLATE DJV MODELS | £1.00 |
|
| 42 | 253196-8 | LARGE WASHER 6 9741 | £1.00 |
|
| 43 | 454484-8 | SEAL PLATE DJV MODELS | £1.00 |
|
| 44 | 272244-4 | *LEVER 17 4340/ |
£3.65 |
|
| 45 | 233139-6 | COMPRESSION SPRING 3 4340 | £1.00 |
|
| 46 | 286032-3 | CAP 5 4340/ |
£1.00 |
|
| 47 | 268063-4 | PIN 4 4340/ |
£1.00 |
|
| 48 | 142111-6 | GEAR HOUSING COMP DJV MODELS | £23.85 |
|
| 49 | 961018-5 | EXT E-RING JIS JE-5 DLS714 | £1.00 |
|
| 50 | 210059-1 | BALL BEARING 6000DDW 2RDCM | £3.15 |
|
| 51 | 519329-8 | ROTOR ASSY DJV MODELS | £55.95 |
|
| 52 | 210022-4 | BALL BEARING 626DDW 9911/ |
£3.05 |
|
| 53 | 266490-9 | TAPPING SCREW PT 2X6 DJV | £1.00 |
|
| 54 | 629996-2 | STATOR | £27.55 |
|
| 55 | 620214-1 | CONTROLLER | £105.45 |
|
| 56 | 643899-6 | TERMINAL BCV01/ |
£3.55 |
|
| 57 | 252171-1 | SQUARE NUT 4340/ |
£1.00 |
|
| 58 | 142110-8 | RETAINER COMP DJV MODELS | £16.85 |
|
| 59 | 319016-7 | BASE DJV MODELS | £8.25 |
|
| 60 | 345237-5 | CRANK PLATE 4340/ |
£1.00 |
|
| 61 | 922231-0 | CAP HD SCREW M5X20 EBH341U | £1.00 |
|
| 62 | 232208-0 | LEAF SPRING 4340CT/ |
£1.00 |
|
| 63 | 346685-1 | BASE PLATE DJV MODELS | £2.55 |
|
| 64 | 265085-5 | COUNTERSUNK SCREW M4X8 ADHISI | £1.00 |
|
| 65 | 135602-4 | ROD ASSY DJV MODELS | £24.95 |
|
The Makita DJV181 is an 18V LXT brushless cordless jigsaw with a 26mm stroke, variable speed from 800 to 3,500 strokes per minute and a maximum cutting capacity of 135mm in wood. Its barrel-handle design, tool-less blade change, orbital action and brushless motor make it a versatile saw for detailed cutting, but regular use can eventually lead to wear or damage to individual components.
If your saw needs repairing, our Makita DJV181 spare parts and DJV181 replacement parts cover the internal mechanism, blade-changing system, motor, controls and base assembly. The DJV181 parts list contains everything from the blade holder and linear guide through to the rotor, stator and electronic controller, making it possible to replace individual components rather than the complete jigsaw.
Makita DJV181 Parts
The DJV181 parts breakdown includes a wide selection of mechanical and electrical components. Among the key parts are the housing set, switch unit, gear housing, linear guide, slider, blade holder, rod, gear assembly, gear housing cover, bearings, rotor assembly, stator, controller, retainer, base and base plate.
This is particularly useful when a Makita DJV181 is not working properly but the problem is limited to one particular component. Instead of replacing the complete tool, the parts diagram can be used to identify the damaged or worn part and match it to the correct Makita part number.
DJV181 Blade Holder, Slider & Rod Parts
The blade-changing mechanism is one of the most important areas of the DJV181. The parts list includes the DJV181 blade holder, slider, rod, linear guide, push plate, balance plate, retaining ring and several springs and pins associated with the mechanism.
If the DJV181 blade holder is damaged, the blade is not being held correctly or the jigsaw has developed excessive movement around the blade, these components are worth checking. The blade holder is listed separately as part number 310547-9, while the slider and rod are also available as individual parts.
The linear guide is another important component because it helps control the movement of the blade mechanism. Wear within this area can contribute to unwanted play or an inconsistent cutting action.
Makita DJV181 Gear & Bearing Parts
Inside the DJV181 is a geared mechanism that transfers the motor's rotation into the reciprocating movement required by the blade. The parts breakdown includes the DJV181 gear assembly, gear housing, gear housing cover, needle bearing and ball bearings, including the 6000DDW and 626DDW bearings.
Worn bearings or damaged gears can become noticeable through increased mechanical noise, vibration or unusual movement while cutting. If your Makita DJV181 is making a grinding noise, has developed excessive play or is no longer operating smoothly, the drive mechanism is an area worth investigating.
The gear assembly and gear housing are available separately, allowing a more targeted repair where the damage is confined to the drive system.
DJV181 Rotor, Stator & Controller
The DJV181 uses a brushless motor, so it does not use conventional carbon brushes. Makita's specifications specifically identify the motor as brushless and describe it as maintenance-free and designed for long life.
The parts list nevertheless includes several key motor and electronic components, including the DJV181 rotor assembly, stator and controller. The rotor is listed as part number 519329-8, the stator as 629996-2 and the controller as 620214-1.
These parts are particularly relevant when diagnosing a DJV181 that has stopped working, runs abnormally or has developed an electrical or motor-related fault. Because the controller is a separate component, an electronic fault does not automatically mean that the complete motor assembly needs to be replaced.
Makita DJV181 Switch & Electrical Parts
A faulty switch can cause intermittent operation or prevent the jigsaw from starting altogether. The DJV181 switch unit is listed separately as part number 632A96-5, alongside the terminal and controller components.
If your Makita DJV181 will not start, stops unexpectedly or has an intermittent electrical fault, the switch and electronic control components should be considered alongside the battery and connections. The DJV181 also incorporates electronic functions such as soft start, soft no-load operation and battery protection, so the controller plays an important role in the operation of the saw.
DJV181 Base, Base Plate & Cutting Parts
The base assembly provides the support needed to guide the jigsaw across the workpiece, while the aluminium base can be bevelled for angled cutting. Makita specifies a bevel range of up to 45 degrees and the parts breakdown includes the DJV181 base, base plate and associated retaining components.
A damaged or bent base can affect the accuracy of the cut, particularly when making longer straight cuts or working at an angle. The base and base plate are available as separate parts, so checking these components is worthwhile if the saw has been dropped or knocked.
The parts listing also includes the dust nozzle, dust cover, dust seal and cover plate components. These are useful when repairing the saw's dust-management and workpiece-protection features.
Makita DJV181 Parts Diagram
The Makita DJV181 parts diagram is useful for identifying the exact component required before ordering. The model has a large number of small mechanical parts, including springs, pins, washers, retaining rings and screws, alongside the larger assemblies such as the gear housing, rotor, stator, controller and base.
It is important to check the exact model number when selecting DJV181 spare parts. Makita's parts information groups some components with related DJV and jigsaw models, but the individual part number should always be matched against your machine before ordering.
Buy Makita DJV181 Parts Online
Whether you need a DJV181 blade holder, linear guide, slider, rod, gear assembly, bearing, rotor, stator, controller, switch, base or one of the smaller repair components, identifying the correct Makita part number makes the repair much easier.
For a Makita DJV181 not working, making unusual noise, struggling with blade movement or showing wear around the base or blade-changing mechanism, replacing the affected component can be a practical alternative to replacing the complete jigsaw. Check the DJV181 parts list carefully, confirm the part number and make sure it matches your exact machine before ordering.