Makita DHP481 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 21 | 187921-4 | HOUSING SET | £12.15 |
|
| 21 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 2 | 815S71-6 | DHP481 NAME PLATE | £1.00 |
|
| 16 | 266130-9 | TAPPING SCREW BIND 3 X 16 L14 | £1.00 |
|
| 4 | 232220-0 | LEAF SPRING 6319/ |
£1.00 |
|
| 5 | 126411-2 | SPEED CHANGE LEVER ASSEMBLY | £1.00 |
|
| 5 | 233438-6 | COMPRESSION SPRING 4 BHPBDF45 | £1.00 |
|
| 6 | 419250-0 | F/ |
£1.00 |
|
| 7 | 650710-5 | SWITCH DHP480/ |
£14.85 |
|
| 8 | 251468-5 | -FLAT HD SCREW M6X22 MT64/ |
£1.00 |
|
| 9 | 766015-4 | KEYLESS DRILL CHUCK 13 | £28.20 |
|
| 10 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 11 | 126410-4 | GEAR ASSEMBLY | £71.35 |
|
| 12 | 142263-3 | INDICATOR PANEL COMP DHP480 | £1.00 |
|
| 13 | 424517-3 | CUSHION DHP480/ |
£1.00 |
|
| 14 | 629116-8 | STATOR COMP DHP481 | £109.35 |
|
| 15 | 619336-2 | *ROTOR DHP481/ |
£67.45 |
|
| 17 | 455011-4 | REAR COVER DHP481/ |
£2.05 |
|
| 18 | 620283-2 | LED CIRCUIT DHP481/ |
£8.55 |
|
| 19 | 643899-6 | TERMINAL BCV01/ |
£3.55 |
|
Makita DHP481 Parts & Repairs
The Makita DHP481 is a high-torque 18V brushless hammer driver drill, built with an all-metal transmission and 13mm keyless chuck for demanding drilling and fastening work. With a tool like this, problems can often be traced to an individual component rather than the complete machine.
If your DHP481 is no longer running properly, the parts drawing and list above can help you identify the component involved and find the correct Makita DHP481 spare part.
Common Makita DHP481 Repairs
One of the more common areas to investigate is the drill chuck, particularly if it is no longer gripping bits correctly or has become damaged. The DHP481 uses a 13mm keyless chuck, which is available as an individual replacement component.
Other faults can involve the switch, gear assembly, speed change mechanism, forward/reverse lever, rotor, stator or electrical connections. These are all individual components within the DHP481 and are shown in the model's parts breakdown.
If the drill is running intermittently, for example, checking the switch, terminals, connectors and wiring can be a useful starting point. Makita's service information specifically identifies switches, connectors, lead wires, the rotor, stator and controller as areas to investigate during fault finding.
Makita DHP481 Gearbox and Motor Parts
The DHP481 uses an all-metal two-speed transmission, making the gearbox an important part of the drill's heavy-duty design. If the drill is making unusual noises, struggling under load or developing problems when changing speeds, the gear assembly and associated components may need inspection.
The model also uses a brushless motor, so unlike older brushed Makita drills, carbon brushes are not a routine replacement item on the DHP481. Instead, faults in the motor system can involve components such as the rotor, stator or electronic control circuitry.
Find the Correct Makita DHP481 Part
The exploded Makita DHP481 parts diagram above is the best place to start when identifying a replacement. Match the numbered position on the drawing with the parts list to find the corresponding Makita part number.
Whether you need a Makita DHP481 chuck, switch, gear assembly, housing, motor component or another replacement part, checking the exact part number before ordering can help ensure you get the correct component for your drill.
Browse the drawing and parts list above to find the Makita DHP481 replacement parts available for your repair.