Skip to main content

Makita DTM52 Parts

A01 191R02-6
DUST EXTRACTION SET FOR DTM52
£10.00
A02 821852-4
storage and organization case
£0.00
A03 413608-5
Slide latch
£0.00
A04 B-64814
PLUNGE CUTSAW 32 TMA047 BIM
£21.50
A05 B-64799
SEGMENT SAW 85 TMA045
£23.50
A06 B-64836
SEGMENT SAW 85 TMA049
£21.50
A08 B-64917
PLUNGE CUTSAW 10 TMA057 BIM
£10.50
A10 B-64923
PLUNGE CUTSAW 20 TMA058 BIM
£11.00
A11 B-64939
PLUNGE CUTSAW 32 TMA059 BIM
£19.50
A12 B-64995
SCRAPER FLEXIBLE TMA066
£12.50
A13 B-65028
SEGMENT SAW 85 TMA069
£29.50
A14 B-65040
SEGMENT SAW 70 TMA071
£29.50
A15 B-66400
S/LCK MAX CUTSAW 32 MAM001 BIM
£15.50
A16 B-66416
S/LCK MAX CUTSAW 52 MAM002 BIM
£17.50
A17 B-66472
S/LOCK MAX JOINT CUTTER MAM008
£8.00
A18 B-22953
DELTA RED 150G 10PC
£4.54
A19 B-65115
SANDING PAD 94 TMA078
£12.60
001 140Y95-2
LEVER COMPLETE DTM52
£5.25
001A 263032-0
RUBBER PIN 4 BTD043/063/103
£1.00
003 232680-6
TORSION SPRING 25 DTM52
£1.00
005 313364-6
DRIVER B DTM52
£2.45
006 265B82-3
P.H.SCREW M3X10 WITH WR DTM52
£1.00
007 266351-3
TAPPING SCREW 4X35 BHR262/HR2
£1.00
008 413G34-0
SWITCH KNOB DTM52
£1.00
009 413396-4
SWITCH LEVER A DTM52
£1.00
010 265B81-5
TAPPING SCREW FLANGE 3X6 DTM52
£1.00
011 620E79-1
LED CIRCUIT DTM52
£4.25
012 413400-9
LED GUIDE DTM52
£2.05
013 136529-1
CRANK HOUSING ASSY DTM52
£100.55
014 422677-5
CUSHION F DTM52
£1.00
015 413401-7
CUSSION SUPPORT F DTM52
£1.00
016 213497-6
O-RING 31.5 DTM52
£1.00
017 266327-0
TAPPING SCREW M3X40 MT240
£1.00
018 265C47-1
TAPPING SCREW PT 2X6 DTM52
£1.00
019 652069-6
FLAT HD SCREW M3X6 DTD170/863L
£1.00
020 620E78-3
CONTROLLER DTM52
£58.65
021 629A56-6
STATOR DTM52
£5.85
022 413394-8
MOTOR HOUSING DTM52
£1.00
023 519683-0
ROTOR ASSY DTM52
£15.85
023A 210248-8
Price on application
£0.00
023B 253492-4
Price on application
£0.00
024 313361-2
Price on application
£0.00
025 253777-8
HARD WASHER 8 UH4860/8412D
£1.00
026 210249-6
BALL BEARING 688LLU DTM52
£2.55
027 961004-6
EXT DIN CIRCLIP-8 HM1317C/CB
£1.00
028 210039-7
BALL BEARING 695DDW HS7611
£2.55
029 253811-4
THIN BLUE WASHER 5 BFS440/683
£1.00
030 961008-8
RETAININIG RING S-5 9565CVL
£1.00
031 422721-8
CAP DTM52
£1.00
032 422682-2
RUBBER RING 35 DTM52
£1.00
033 183S78-3
HOUSING SET DTM52
£9.35
034 213032-0
O RING 5 GA4030/GA4034/GA4530
£4.45
035 327769-4
HOLDER BOLT DTM52
£4.45
036 422679-1
CUSHION M DTM52
£1.00
038 313365-4
WEIGHT DTM52
£2.45
039 413397-2
SWITCH LEVER B DTM52
£1.00
040 650000-6
SWITCH BSW-1125A-17 DTM52
£3.35
041 413G11-2
SWITCH BASE DTM52
£1.00
042 632S34-5
SWITCH UNIT DTM52
£6.35
043 232706-4
LEAF SPRING DTM52
£1.00
044 413399-8
SWITCH COVER DTM52
£1.00
045 422678-3
CUSHION R DTM52
£1.00
046 643874-2
TERMINAL DTM52
£3.65
047 183S69-4
INNER HOUSING SET DTM52
£9.25
048 265935-4
TAPPING SCREW 3X20
£1.00
049 8032F3-5
Price on application
£1.00
050 811E24-9
Price on application
£1.00
051 811E32-0
Price on application
£0.00

The Makita DTM52 is an 18V LXT cordless multi-tool designed for cutting, scraping, sanding and other detailed renovation work. Its brushless motor, variable-speed control and Starlock MAX tool interface make it a versatile machine, but the mechanism contains a number of individual components that can be replaced when the tool develops a fault.

If your Makita DTM52 is not working, has developed excessive vibration, is making unusual noises or the oscillating head is no longer operating correctly, the DTM52 spare parts breakdown can help identify the particular component involved.

Makita DTM52 Parts Diagram and Parts List

The DTM52 parts diagram covers the complete tool from the outer housing and operating controls through to the motor, crank mechanism and electrical components. The parts list includes both complete assemblies and smaller items such as springs, O-rings, bearings, washers and screws.

Important components include the housing set, crank housing assembly, rotor, stator, controller, switch, LED circuit, battery terminal and holder bolt. There are also numerous internal components associated with the oscillating drive mechanism.

Checking the exact DTM52 model and the applicable parts list is important when ordering, particularly where Makita has introduced updated or interchangeable components.

DTM52 Brushless Motor and Electrical Parts

The DTM52 uses a brushless motor, so there are no conventional carbon brushes to replace. Instead, the motor relies on a rotor, stator and electronic controller to produce and regulate the oscillating drive.

The parts list identifies 519683-0 rotor assembly, 629A56-6 stator and 620E78-3 controller, together with the motor housing and associated bearings. The controller is an important part of the electronic system and can be relevant when a DTM52 has a battery fitted but the motor will not operate.

The electrical section also includes the 620E79-1 LED circuit, switch components and 643874-2 terminal. If the DTM52 has power but will not start, the battery connection, switch and electronic components should be checked alongside the mechanical drive.

DTM52 Crank Housing and Oscillating Mechanism

The crank mechanism converts the motor's rotation into the rapid oscillating movement required at the tool head. This is one of the most important mechanical assemblies inside the DTM52.

The parts breakdown includes the 136529-1 crank housing assembly, together with cushions, supports, O-rings, bearings, washers and other components surrounding the drive mechanism. A worn bearing or damaged internal component can affect the smoothness of the tool's operation.

If your DLM52 is vibrating excessively or the head has developed unusual movement or noise, the crank housing and associated drive components are worth investigating. The individual components listed in the parts diagram can be useful when a complete assembly is not required.

DTM52 Tool Holder and Front Mechanism

The front of the DTM52 is responsible for transferring the oscillating movement into the fitted Starlock accessory. The tool uses a Starlock-compatible mounting system designed for quick accessory changes without the need for a separate spanner.

The parts breakdown includes the 313517-7 driver, 327769-4 holder bolt and associated cushions, rings and internal components around the tool holder.

If the DTM52 tool holder is loose, accessories are not being secured correctly or the front mechanism has suffered damage, these components should be checked against the parts diagram. Wear around the holder can also affect the way cutting and sanding accessories behave during use.

DTM52 Switch and Speed Control Parts

The DTM52 incorporates variable-speed control, allowing the oscillation rate to be adjusted to suit the material and accessory being used. Its operating controls include several small switch and lever components which are individually identified in the parts list.

Parts include the 413G34-0 switch knob, 413396-4 switch lever A, 413397-2 switch lever B, 650000-6 switch and 413G11-2 switch base.

If the DLM52 switch is not working, the speed control feels damaged or the tool cuts in and out during operation, these components provide a useful starting point for identifying the fault. A damaged external control does not necessarily mean that the brushless motor itself needs replacing.

DTM52 Housing, Battery Terminal and Small Parts

The outer housing protects the motor and electronics while also supporting the controls and front mechanism. The parts catalogue identifies 183S78-3 housing set, along with an inner housing set, cushions, covers and various fixing components.

The 643874-2 battery terminal is also separately listed. If the tool intermittently loses power or does not respond when the battery is fitted, the battery connection and terminal should be inspected.

The DTM52 parts list also contains numerous small components including O-rings, retaining rings, washers, screws, rubber rings and springs. These can be particularly useful when a tool has been dismantled for repair and a relatively inexpensive internal component has been damaged or lost.

DTM52 LED and Dust Extraction Parts

The DTM52 includes an integrated LED to illuminate the working area, with a separate 620E79-1 LED circuit and 413400-9 LED guide listed in the parts breakdown.

Makita also provides a dedicated 191R02-6 dust extraction set for the DTM52. This is useful when sanding or carrying out cutting work where controlling dust around the workpiece is important.

If the LED has stopped illuminating while the tool itself continues to operate, the separate LED circuit and guide can be investigated rather than assuming the main controller has failed.

Identifying the Correct Makita DTM52 Parts

When searching for Makita DTM52 parts online, compare the component with the model-specific parts diagram before ordering. Some DTM52 packages also include accessories, batteries, chargers and cases, but these should not be confused with the individual components used inside the tool.

The available DTM52 replacement parts include the brushless motor components, controller, crank housing, rotor, stator, switchgear, LED circuit, battery terminal, housing, tool-holder components, bearings, springs and numerous smaller fittings.

For a DTM52 that has developed a specific fault, identifying the relevant assembly first can make it much easier to trace the individual part required from the numbered parts list.