Enhance your Makita BTD140 with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 188030-2 | *HOUSING SET BTD140SFE | £23.80 | |
| 2 | 861805-1 | *NAME PLATE BTD140SFE | £1.00 | |
| 2 | 862356-7 | NAME PLATE BTD140SFE | £1.00 | |
| 3 | 266130-9 | TAPPING SCREW BIND 3 X 16 L14 | £1.00 | |
| 4 | 251314-2 | SPECIAL PAN HD SCREW M4X12 | £1.00 | |
| 5 | 324553-8 | *HOOK BTD130F/BHP451/BTP130/14 | £1.80 | |
| 5 | 324705-1 | HOOK TW250D/BST220/BST221 | £2.00 | |
| 6 | 419041-9 | F/R CHANGE LEVER BTD043/063/1 | £1.00 | |
| 7 | 650564-0 | !SWITCH TG553FSB-1 BTD130F140D | £23.40 | |
| 8 | 652045-0 | PANHD SCREW M3.5X5 BTD134/146 | £1.00 | |
| 9 | 643812-4 | TERMINAL BPB180/BPJ180/BDF45 | £3.30 | |
| 9 | 643844-1 | TERMINAL | £2.60 | |
| 10 | 231951-8 | RING SPRING 11 BTD/TD126/TL064 | £1.00 | |
| 11 | 267085-1 | NARROW WASHER 12 TD126/DTD154 | £1.00 | |
| 12 | 233005-7 | COMPRESSION SPRING 13 TD126 | £1.00 | |
| 13 | 324420-7 | SLEEVE 6916FD-6980FD/TD126 | £2.20 | |
| 14 | 421913-6 | *BUMPER BTD130F/BTP130/140 | £2.20 | |
| 14 | 424197-5 | BUMPER BTD130F/BTP130/140 | £2.20 | |
| 14 | 424370-7 | BUMPER BTD130F/BTP130/140 | £2.80 | |
| 15 | 419042-7 | *HAMMER CASE COVER BTD130F | £1.00 | |
| 15 | 452380-4 | HAMMER CASE COVER BTD130F | £2.80 | |
| 16 | 154590-6 | HAMMER CASE COMP BTD130F/132D | £14.80 | |
| 17 | 261108-7 | NYLON WASHER 14 BTD043/063/10 | £1.00 | |
| 18 | 216001-0 | STEEL BALL 3.5 BPJ/DTD154/TL06 | £1.00 | |
| 19 | 324432-0 | ANVIL M 6935/80FD/BTD132/144 | £18.20 | |
| 20 | 324583-9 | HAMMER BTD130F/BTD132 BTD133 | £11.20 | |
| 21 | 216001-0 | STEEL BALL 3.5 BPJ/DTD154/TL06 | £1.00 | |
| 22 | 267175-0 | FLAT WASHER 24 HR1840/HR1841F | £1.00 | |
| 23 | 233430-2 | COMPRESSION SPRING 24 BTD134/ | £2.10 | |
| 24 | 267766-7 | CUP WASHER 14 BTP130/TD126 | £1.00 | |
| 25 | 216011-7 | STEEL BALL 5.6/DTW285 | £1.00 | |
| 26 | 226336-1 | *SPUR GEAR 12 6503D/TD126 | £4.20 | |
| 27 | 324552-0 | SPINDLE BTD130F/BTD132/144 | £12.60 | |
| 28 | 256253-1 | PIN 5 BTD134LF10/TD126 | £1.00 | |
| 29 | 267212-0 | FLAT WASHER 12 TD126/6916-691 | £1.00 | |
| 30 | 227150-8 | INTERNAL GEAR 51 BTD134/136/1 | £3.20 | |
| 31 | 211140-1 | BALL BEARING 6901LLB BTD134/1 | £5.00 | |
| 32 | 213507-9 | O RING 40 BTD134/136/144/146/ | £3.10 | |
| 33 | 154769-9 | BEARING BOX COMPLETE | £10.20 | |
| 34 | 638396-5 | YOKE UNIT BTD043/063/103 | £11.40 | |
| 35 | 619172-6 | *ARMATURE BTD140SFE | £16.40 | |
| 35 | 619247-1 | ARMATURE BTD140SFE/BTD146 | £14.80 | |
| 36 | 194427-5 | CARBON BRUSH CB-440 BTD043/06 | £3.10 | |
| 36 | 194159-4 | *CARBON BRUSH CB-436 BTD130F/ | £5.10 | |
| 37 | 638387-6 | !BRUSH HOLDER COMP BTD130F | £3.60 | |
| 38 | 263032-0 | RUBBER PIN 4 BTD043/063/103 | £1.00 | |
| 39 | 418981-8 | REAR COVER BDF450/BHP450/BTD1 | £5.70 | |
| 40 | 266130-9 | TAPPING SCREW BIND 3 X 16 L14 | £1.00 | |
| 40 | 266429-2 | TAPPING SCREW 3X16 TD126/DUM | £1.00 | |
| 41 | 631693-8 | LIGHT CIRCUIT BTD140SFE/BTP13 | £13.10 | |
| 42 | 188030-2 | *HOUSING SET BTD140SFE | £23.80 | |
| 42 | 188127-7 | HOUSING SET | £15.80 | |
| 42 | 187138-9 | HOUSING SET BTD140SFE | £17.70 | |
| 1001 | 158210-4 | Price on application | £46.40 | |
| 1001 | 824753-5 | Price on application | £45.20 | |
| 1002 | ***DC18RA | DC18RA FAST CHARGER | £120.60 | |
| 1002 | ***DC18SC | DC18SC CHARGER | £0.00 | |
| 1003 | 194204-5 | Price on application | £231.70 | |
| 1004 | 803745-7 | *PLASTIC CASE LABEL BTD140SFE | £8.40 | |
| 1004 | 804252-3 | PLASTIC CASE LABEL BTD140SFE | £1.00 | |
| 1004 | 804572-5 | BTD140SFE3 PLASTIC CASE LABEL | £0.00 | |
| 1004 | 804724-8 | BTD140RFE PLASTIC CASE LABEL | £0.00 | |
| 1004 | 804726-4 | BTD140RFE3 PLASTIC CASE LABEL | £0.00 | |
| 1008 | 450128-8 | BATTERY COVER BDG800/DTW251 | £1.00 |
Cordless Carbon Brush Set - 194427-5 CB440
195021-6 supersedes older part numbers: 194427-5
Original Makita carbon brush set CB‑440 (part 195021‑6) — a direct replacement brush set for Makita brushed motors; replaces older Makita references such as 194427‑5 and 194159‑4.
What’s included and key dimensions: two carbon brushes per pack with braided copper wire leads and springs attached for an easy swap. Each brush measures approximately 3 × 10 × 13 mm (thickness × width × length). The brushes are graphite/carbon with brass terminal/lead construction.
Example models this CB‑440 set fits (common examples only): BDF452 / BDF451 / BDF440 series drills, BHP451 / BHP452 hammer drivers, BTD130 / BTD140 / BTD142 impact drivers, BTP140, BTW250 / BTW251 impact wrenches, DDF482 / DHP482 and DTW250 / DTW251 among many other Makita LXT 18 V brushed motor tools. (Check the brush size against your tool’s existing brushes to confirm fit.)
Why install this part: worn brushes cause poor performance, excessive sparking and can damage the commutator — replacing them with an original Makita CB‑440 carbon brushes restores motor contact and extends tool life. The set is ready to drop in where CB‑440 is specified.
(If your tool’s brush compartment or terminal style looks different, compare the 3 × 10 × 13 mm dimensions and the wire‑lead/spring arrangement to be sure this is the correct brush set for your model.)
Jump straight to the Makita spare parts diagrams:
Browse our full range of Makita drill parts. Makita impact driver parts. Makita impact wrench parts. Makita hammer drill parts.
This model also has 1 accessories available.
Scroll down to view them.
