Makita DHS660 Parts
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| A01 | 783203-8 | HEX WRENCH 5 | £1.00 |
|
| A02 | B-62979 | *EFFICUT TCT SAW BLADE 165X20X25T | £33.50 |
|
| A03 | 164095-8 | GUIDE RULE BHS630/ |
£4.90 |
|
| A04 | 911233-1 | PAN HD SCREW M5X20 W/ |
£1.00 |
|
| A07 | 453974-8 | LATCH FOR STACKING CASE MACPAK | £2.13 |
|
| A07 | 821551-8 | STACKING CASE TYPE 3 210MM | £69.28 |
|
| A08 | 839752-4 | INNER TRAY DHS660RTJ, DHS660Z, DHS661ZU | £10.30 |
|
| A09 | 450128-8 | BATTERY COVER BDG800/ |
£1.00 |
|
| A11 | 197280-8 | BATTERY BL1850B | £338.80 |
|
| 6 | 265995-6 | TAPPING SCREW 4X18 | £1.00 |
|
| 9 | 140C48-9 | MOTOR HOUSING COMPLETE DHS660 | £11.55 |
|
| 9 | 263005-3 | RUBBER PIN 6 DUR/ |
£1.00 |
|
| 010 | 911263-2 | PAN HD SCREW M5X40 W/ |
£1.00 |
|
| 12 | 651083-9 | SWITCH C3XA-1PSPM DSP600 | £19.85 |
|
| 13 | 231433-0 | COMPRESSION SPRING 4 | £1.00 |
|
| 19 | 644809-6 | TERMINAL DJR186/ |
£3.45 |
|
| 30 | 240045-8 | FAN 55 BUH550RD/ |
£2.55 |
|
| 31 | 210059-1 | BALL BEARING 6000DDW 2RDCM | £3.15 |
|
| 32 | 233117-6 | COMPRESSION SPRING 6 BHS630/ |
£1.00 |
|
| 32-1 | 233342-9 | COMPRESSION SPRING 6 HR2450 | £1.00 |
|
| 34 | 911223-4 | PAN HD SCREW 5X16 W/ |
£1.00 |
|
| 36 | 140D07-9 | BLADE CASE COMPLETE DHS660/ |
£40.65 |
|
| 36 | 213821-3 | O RING HS7601 | £1.00 |
|
| 37 | 262511-5 | RUBBER SLEEVE 6 M241 BHS630/ |
£1.00 |
|
| 38 | 265115-2 | PAN HD SCREW M5 BHS630/ |
£1.75 |
|
| 39 | 211012-0 | BALL BEARING 606ZZ HR2410/ |
£9.65 |
|
| 40 | 961052-5 | EXT DIN 471 CIRCLIP-12 EM2651 | £1.00 |
|
| 42 | 257173-2 | RING 12 MT814/ |
£1.00 |
|
| 43 | 213512-6 | O RING 39 HK1800/ |
£2.25 |
|
| 45 | 265034-2 | COUNTERSUNK HD SCREW M5X16 | £1.00 |
|
| 46 | 211131-2 | BALL BEARING 6001DDW HS7100 | £5.75 |
|
| 48-1 | 327244-0 | SPINDLE DHS660/ |
£2.85 |
|
| 49 | 345469-4 | THICKNESS RING BSS610 | £1.00 |
|
| 50 | 231832-6 | TENSION SPRING 3 DHS660/ |
£2.05 |
|
| 52 | 961152-1 | RETAINING RING S-3 DHS680/ |
£1.00 |
|
| 53 | 224593-5 | INNER FLANGE 35 5008MG/ |
£10.65 |
|
| 54 | 224409-4 | OUTER FLANGE 35 HS6100/ |
£10.25 |
|
| 55 | 266925-0 | HEX SOCKET HD BOLT M6X18 | £1.00 |
|
| 59 | 264096-7 | HEX NUT M6 DHS710DJ/ |
£1.00 |
|
| 62 | 252631-3 | WING NUT M6 500 LF1000/ |
£2.85 |
|
| 63 | 942151-2 | *SPRING WASHER 6 | £1.00 |
|
| 65 | 161899-9 | DEPTH GUIDE COMPLETE DHS660/ |
£4.05 |
|
| 66 | 265939-6 | SQUARE NECK SCREW M6X14 | £1.00 |
|
| 69 | 252103-8 | HEX LOCK NUT M5-8 BO3710/ |
£1.00 |
|
| 70 | 345590-9 | ANGULAR GUIDE BHS630/ |
£3.55 |
|
| 71 | 256480-0 | SHOUDER PIN 6-7 BHS630/ |
£1.00 |
|
| 72 | 318823-5 | STOPPER HS6100/ |
£1.85 |
|
| 73 | 213977-2 | O RING 7 PC5000/ |
£1.00 |
|
| 74 | 266734-7 | TRUSS HD SCREW M5 HS6100/ |
£1.95 |
|
| 75 | 251896-4 | WING SCREW M5X20 BSS500/ |
£2.25 |
|
| 76 | 231007-7 | COMPRESSION SPRING 6 BCS500 | £1.00 |
|
| 78 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 |
|
| 79 | 266735-5 | HEX BOLT M6X20 DHS680 | £1.95 |
|
| 81 | 257982-9 | BOW STOP RING E-8 HS6100/ |
£1.00 |
|
| 82 | 347398-7 | BASE DHS660/ |
£8.75 |
|
| 83 | 265085-5 | COUNTERSUNK SCREW M4X8 ADHISI | £1.00 |
|
| 84 | 912212-2 | COUNTERSUNK SCREW M5X12 HS0600 | £1.00 |
|
| 85 | 266436-5 | HS SET SCREW/ |
£1.00 |
|
The Makita DHS660 is an 18V LXT brushless cordless circular saw with a 165mm blade and a maximum cutting depth of 57mm at 90°. It has a 5,000 rpm no-load speed, electric brake, soft start, Automatic Torque Drive Technology (ADT), built-in LED lighting and a blower function to help clear the cut line.
If your Makita DHS660 is not working, has developed excessive movement, is cutting inaccurately or has a problem with the blade, switch, motor, base or adjustment mechanism, individual DHS660 spare parts can be identified from the parts diagram and list.
Makita DHS660 Parts Diagram and Parts List
The DHS660 parts diagram above breaks the circular saw down into its motor housing, electrical controls, blade assembly, base, guards and adjustment mechanisms. The parts list contains more than just the major assemblies, with individual screws, springs, washers, pins, bearings and other small components also identified.
The DHS660 is available as the tool-only DHS660Z and in different kit configurations, so checking the exact model and part number before ordering is important. The parts documentation also contains components shared with or related to other Makita machines, making the diagram particularly useful when identifying smaller parts.
DHS660 Brushless Motor and Controller Parts
The DHS660 uses a brushless motor, so there are no conventional carbon brushes to replace. The parts breakdown includes the motor housing, rotor, stator and electronic control components responsible for regulating the saw's operation.
The parts list identifies 519527-4 rotor and 629362-3 stator, together with the 632L80-6 switch unit, 620936-3 controller and related electrical components.
If the DHS660 has power but will not run, the battery connection, switch unit, controller and brushless motor should be considered after basic checks. A brushless motor fault can produce symptoms similar to an electronic control problem, making the correct part identification important.
DHS660 Switch, Lock-Off and LED Parts
The DHS660 uses a lock-off system to help prevent accidental operation, together with electronic controls and built-in LED lighting. The parts breakdown includes the 419704-7 lock button, 632L80-6 switch unit, 644809-6 terminal and LED-related components.
If the DHS660 switch is not working, the saw is intermittent or the trigger and lock-off controls are not operating correctly, the switch assembly and associated mechanical components can be checked against the parts diagram.
The electrical system also incorporates protection and control functions associated with Makita's brushless LXT platform, so replacing individual components with the correct part number is important.
DHS660 Blade, Guard and Spindle Parts
The 165mm blade is mounted to a dedicated spindle and protected by the saw's upper and lower blade guards. The parts breakdown includes the 224409-4 outer flange, 266925-0 hex socket head bolt, 327143-6 spindle and 458680-0 lower blade guard.
The saw's blade guard mechanism also contains springs, washers, pins and supporting components. If the DHS660 blade guard is sticking or does not return correctly, the complete mechanism should be inspected rather than assuming the guard itself is the only damaged component.
A suitable 165mm blade with the correct bore should always be used for the saw, with the blade, flanges and spindle checked if there is unusual movement around the cutting assembly.
DHS660 Base and Bevel Adjustment Parts
The DHS660 has an aluminium base with bevel adjustment to 50°, while the depth and bevel settings use large levers designed for quick adjustment. The parts list contains the base assembly, bevel scale, adjustment levers, brackets, washers, pins and other associated components.
If the DHS660 bevel adjustment is not working or the base has excessive movement, inspect the locking and adjustment components alongside the base itself. A damaged lever, worn pivot or missing washer can affect the accuracy and stability of the saw.
The saw can cut to 41mm at 45° and 37mm at 50°, making accurate adjustment of the base particularly important when making bevel cuts.
DHS660 Dust Nozzle and Cut-Line Components
Dust extraction is another useful feature of the DHS660. A removable dust nozzle allows the saw to be connected to a suitable extraction system, while the built-in blower helps keep the cutting line visible.
The 199230-9 dust nozzle set is listed for the DHS660/DHS661, while the parts information also includes the front grip, indication plate and other components surrounding the cutting and visibility systems.
If the DHS660 dust nozzle is damaged or the extraction connection has been lost, the individual nozzle assembly can be replaced without replacing the main saw.
DHS660 Housing, Handle and Small Parts
The housing protects the brushless motor and electronics while providing the mounting points for the front and rear handles, battery connection and operating controls. The parts catalogue identifies the 140C48-9 motor housing complete and 458590-1 front grip, along with rubber pins, screws and other small fittings.
Small Makita DHS660 parts can be particularly useful when repairing damage caused by regular site use. The parts list contains numerous individual nuts, washers, screws, springs and retaining components that support the blade, base and housing assemblies.
Choosing the Correct DHS660 Spare Parts
When searching for Makita DHS660 parts online, check the exact model identification before ordering, particularly for electrical and motor components. The DHS660 parts documentation contains numerous individual components, while some parts are shared across related Makita models.
From the DHS660 brushless motor, rotor and stator to the switch unit, controller, spindle, blade guard, base, bevel mechanism, dust nozzle and smaller fixings, the parts diagram provides a detailed reference for identifying the component you need.
Using the original Makita part number alongside the DHS660 parts diagram gives you the best starting point for matching the correct DHS660 spare parts to your circular saw.