Skip to main content

Makita DSS501 Parts

PT SCREW 4X35 VC3211M/BSS501
£1.00
HOLDER CAP 6347D/BSS500/BSS50
£1.00
CARBON BRUSH SET CB-430 (Pair)
£4.45
HOUSING SET BCS550/BSS500/501
£8.35
HOUSING SET BCS550/BSS500/501
£8.35
TAPPING SCREW 4X18
£1.00
DSS501 NAME PLATE
£1.00
ENDBELL COMP BCS550/BSS500/50
£3.65
YOKE UNIT DPB180/CS550/BSS500
£22.25
TAPPING SCREW 4X18
£1.00
*HANDLE L BCS550/BSS500/BSS501
£15.75
COMPRESSION SPRING 4/PM7651H
£1.00
LOCK OFF LEVER BCS550/DKP180
£1.00
SWITCH TG72BD BUC122/BSS501
£10.05
COMPRESSION SPRING 4/PM7651H
£1.00
SWITCH LEVER BHS630/DCS550/DK
£1.00
PAN HD SCREW M4X18 KP0810C
£1.00
*HANDLE R BCS550/BSS501
£18.15
TERMINAL DUR182/DHR165/DKP180
£3.35
PAN HD SCREW M4X18 KP0810C
£1.00
RUBBER RING 13 BPJ140/BPJ180
£1.00
*ARMATURE BCS550/BSS501
£17.05
SHAFT LOCK DCS550/BSS500/501
£1.00
COMPRESSION SPRING 6 BHS630/P
£1.00
GEAR HOUSING BCS550/BSS500/50
£3.25
O RING 44 HS6100/7100/BSS500
£1.75
BALL BEARING 604ZZ CC300D/BCS
£3.15
GEAR SHAFT BCS550/BSS500/501
£1.95
HELICAL GEAR 35
£3.95
BALL BEARING 6900ZZ BCS550
£4.65
HELICAL GEAR 15 BCS550/BSS500
£4.25
LED CIRCUIT BCS550/BSS500-501
£7.25
RUBBER SLEEVE 6 BCS550/BSS500
£1.00
SLEEVE 4 DCS550/BSS500/BSS501
£1.00
*PT SCREW 4X25 VC3211M/BSS500
£1.00
BLADE CASE
£8.05
BLOWER NOZZLE
£2.55
CT SCREW M4X12 UC3530A/KP0810
£1.00
BALL BEARING 696ZZ GA4541/BU
£2.85
EXT DIN 471 CIRCLIP-10 KP0810
£1.00
HELICAL GEAR 23 BCS550/BSS500
£4.25
SLEEVE 10 DCS550/BSS500/BSS50
£1.00
BEARING RETAINER 14-23 BHS630
£3.75
BALL BEARING 6900DDW BHS630
£4.95
O RING 26 CC300D/HR3000/BSS50
£1.00
BEARING BOX BCS550/BSS500-501
£3.05
SPINDLE DCS550/DCS500/BSS501
£3.05
COUNTERSUNK HD SCREW M5X16
£1.00
THICKNESS RING BHS630/DCS550
£1.00
TENSION SPRING 4
£2.15
SAFETY COVER
£3.65
NARROW BLUE WASHER 26 BHS630
£1.00
RETAINING RING WR-26 (EXT)
£1.00
INNER FLANGE 30 BCS550/BSS500
£1.75
OUTER FLANGE 30 BCS550/BSS500
£2.85
HEX SOCKET HD BOLT M6X18 BHS6
£1.00
EXT E-RING JIS JE-8 BPJ140/18
£1.00
LEVER 40 BSS500/BSS501/3901/
£3.65
HEX NUT M6 BPJ140/180/BSS500/
£2.25
FLAT WASHER 6 DIN125-B BHS630
£1.00
PIPE 6 BCS550/BSS500/BSS501
£1.00
HEX LOCK NUT M5-8 BO3710/3711
£1.00
BASE COMPLETE
£15.95
SHOULDER SCREW M5 CC300D/BSS5
£1.00
FLAT H SQ NECK BOLT M6X75 BCS
£1.00
HEX SOCKET HEAD SET BSS500/50
£1.00
SQ NECK SETSCREW M6X20 BCS550 (Left hand thread)
£1.00
WING SCREW M5X20 BSS500/8406C
£2.25
COMPRESSION SPRING 6 BCS500
£1.00
FLAT WASHER 6 DIN125-B BHS630
£1.00
SPECIAL HEX NUT M6-10 3901
£3.35
LEVER 30
£1.00
EXT E-RING JIS JE-8 BPJ140/18
£1.00
FLAT WASHER 9 BSS500-501/2450
£1.00
CONTROLLER BSS500/BSS501/BCS5
£34.85
1001 164095-8
GUIDE RULE BHS630/BSS500/BSS50
£4.90
1002 194415-2
DUST NOZZLE SET
£3.86
1003 ***DC18RC
18V CHARGER
£17.79
1004 194204-5
Battery Pack, Lithium-ion, 18V, 5.0Ah
£231.70
1005 783203-8
HEX WRENCH 5
£1.00
1006 821551-8
STACKING CASE TYPE 3 210MM
£69.28
1006 141485-2
PLASTIC CASE COMPLETE
£34.30
1007 837628-9
MAKPAC TRAY TYPE 3 DSS500/501
£11.74
1007 804E43-2
DSS501RFE PLASTIC CASE LABEL
£0.00
1008 B-10643
Circular Saw Blade
£45.96
1009 450128-8
BATTERY COVER BDG800/DTW251
£1.00
1010 804E31-9
DSS501RFJ INDICATION LABEL
£0.00
1010 804E33-5
DSS501ZJ INDICATION LABEL
£0.00
1011 804E32-7
DSS501RFJ PLASTIC CASE LABEL
£0.00
1011 804E34-3
DSS501ZJ PLASTIC CASE LABEL
£0.00
5001 688131-1
LINE FILTER VC3211M/TD0101F
£1.00
5002 688161-2
LINE FILTER BTD/DTM51/DVC861L
£3.95

The Makita DSS501 is an 18V LXT cordless circular saw with a compact 136mm blade and a maximum cutting depth of 51mm at 90°. Its lightweight design, stainless-steel base and 50° bevel capacity make it particularly useful where manoeuvrability is important, while the integrated LED helps illuminate the cutting area.

If your Makita DSS501 is not working, has lost power, is cutting poorly or has developed a problem with the blade drive, guard, switch, base or adjustment mechanism, the individual DSS501 spare parts can be identified from the parts diagram and list above.

Makita DSS501 Parts Diagram and Parts List

The DSS501 parts diagram breaks the saw down into the motor and electrical assembly, handles, blade mechanism, guards, base and adjustment components. This is useful when a small component needs replacing but its name or part number is not immediately obvious.

The parts list includes the housing, carbon brushes, brush holder, yoke, armature, switch, battery terminal, shaft lock, spindle, bearings, blade guard, base plate, guide fence and dust nozzle, along with numerous springs, screws, washers and retaining components.

DSS501 Motor, Armature and Carbon Brushes

The DSS501 uses a conventional brushed motor, with 191971-3 CB-430 carbon brushes listed as replaceable components. The parts breakdown also identifies 619202-3 armature, 638925-4 endbell complete and 638420-4 yoke unit.

If the DSS501 is losing power, producing excessive sparking or cutting out during use, the carbon brushes are worth checking first. Brushes are wear components and can eventually become too short to maintain reliable contact with the armature.

A fault that remains after checking the brushes may require inspection of the armature, brush holder, yoke and other motor components.

Makita DSS501 Switch and Electrical Parts

The main electrical controls include 651956-6 TG72BD switch, 419665-1 switch lever and 419664-3 lock-off lever. The saw also has a 644808-8 battery terminal connecting it to the 18V LXT battery.

If the DSS501 will not start, check the battery connection, terminal, lock-off mechanism and switch before assuming that the motor has failed. A damaged switch lever can also prevent the main switch from operating correctly.

The battery terminal is separately replaceable, which can be useful if the saw has intermittent power or loses its electrical connection when the tool is moved.

DSS501 Blade, Spindle and Drive Parts

The 136mm blade is driven through the saw's spindle and gear mechanism. The parts breakdown includes the 345643-4 shaft lock, along with the armature and associated drive components.

The shaft lock is particularly important when removing and fitting the blade, as it holds the spindle while the blade fixing is loosened or tightened.

If the DSS501 blade is not running correctly, is wobbling or the saw has developed unusual noise around the drive assembly, the spindle, bearings, gears and associated components should be inspected.

DSS501 Blade Guard and Safety Components

The lower blade guard is designed to move as the saw enters and leaves the workpiece, protecting the blade when it is not cutting. The parts diagram identifies the guard assembly together with springs, pins, washers and related fittings.

If the DSS501 blade guard is sticking, does not retract smoothly or fails to return correctly, inspect the guard mechanism rather than continuing to use the saw with a damaged safety component.

The guard system contains several small mechanical parts, so a broken spring, worn pivot or damaged retaining component can sometimes be responsible for the problem.

DSS501 Base, Bevel and Cutting Adjustment Parts

The stainless-steel base provides the reference surface for the saw while cutting and incorporates the mechanisms used to adjust the cutting angle. The DSS501 can bevel to 50°, making the base and its adjustment components important for accurate angled cuts.

The parts system includes the 164095-8 guide fence, adjustment hardware, levers, springs, washers and other components associated with the base and cutting-angle mechanism.

If the DSS501 bevel adjustment is not working, or the base no longer holds its setting securely, check the locking and adjustment components for damage or wear.

DSS501 Handle, Housing and Dust Extraction Parts

The DSS501 housing incorporates the motor, electrical components and operator controls, while the two-part handle provides the grip needed to guide the saw. The parts catalogue identifies 188209-5 housing set, 453426-9 handle L and 453154-6 handle R, with updated handle references also appearing in the parts information.

The saw can also be fitted with a removable dust extraction connection. 194415-2 dust nozzle set is listed for the DSS501, allowing dust extraction equipment to be connected when required.

If the DSS501 housing or handle is damaged, individual sections and associated screws can be identified from the parts list rather than assuming the complete tool body needs replacing.

Finding the Correct Makita DSS501 Parts

When searching for Makita DSS501 parts online, check the exact model designation before ordering, particularly for motor and electrical components. Parts information for the DSS501 also contains updated references for some components, so matching the original part number with the latest diagram is worthwhile.

From the DSS501 motor and carbon brushes to the armature, switch, battery terminal, shaft lock, blade drive, guard, guide fence, housing and handle components, the parts list provides a useful reference for identifying the individual component needed for your circular saw.

Using the original Makita part number alongside the DSS501 parts diagram makes it easier to select the correct DSS501 spare parts for your particular saw.