Enhance your Bosch 0 60130 034 with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 2 610 996 864 | Motor Housing | £41.02 | |
| 2 | 2 610 996 867 | Field | £43.16 | |
| 3 | 1 619 P03 279 | Armature | £105.14 | |
| 4 | 2 610 996 892 | On-off Switch | £35.16 | |
| 5 | 2 610 996 945 | Power Supply Cord | £25.99 | |
| 6 | 2 610 358 840 | Grommet | £2.05 | |
| 7 | 2 610 358 842 | Clamp | £1.00 | |
| 8 | 1 609 203 K91 | Front Panel | £37.23 | |
| 9 | 2 610 997 806 | Sticker | £1.00 | |
| 12 | 2 610 997 306 | Speed Governor | £55.92 | |
| 13 | 2 610 911 928 | Ball Bearing | £8.73 | |
| 14 | 2 610 911 927 | Ball Bearing | £19.05 | |
| 16 | 2 610 911 858 | Brush Holder | £11.64 | |
| 19 | 2 610 358 844 | Screw | £1.00 | |
| 20 | 2 610 997 809 | Nameplate | £2.51 | |
| 22 | 2 610 996 865 | Cover | £10.06 | |
| 23 | 2 610 998 571 | Screw | £1.00 | |
| 24 | 2 610 911 859 | Brush-cover | £2.05 | |
| 25 | 2 610 327 868 | Nut | £1.00 | |
| 26 | 2 610 911 569 | Insert | £2.33 | |
| 27 | 2 610 911 929 | Screw | £1.00 | |
| 28 | 2 610 996 948 | Rubber Ring | £1.00 | |
| 29 | 2 610 911 566 | Bearing Cover | £2.45 | |
| 30 | 2 610 355 295 | Screw | £2.05 | |
| 31 | 2 610 996 863 | Gear Housing | £47.98 |
NOT AVAILABLE
|
| 32 | 1 609 902 670 | Screw | £1.00 | |
| 33 | 2 610 911 924 | Spring Washer | £3.03 | |
| 34 | 2 610 996 949 | Ball Bearing | £10.06 | |
| 35 | 2 610 997 281 | Spring Retaining Ring | £1.00 | |
| 36 | 2 610 997 208 | Toothed Gear | £30.51 | |
| 37 | 2 610 996 869 | Gear Cover | £19.33 | |
| 38 | 2 610 997 282 | Spring Retaining Ring | £1.00 | |
| 39 | 2 610 997 210 | Ball Bearing | £10.06 | |
| 40 | 2 610 997 211 | Output Shaft | £25.04 | |
| 41 | 2 610 993 102 | Woodruff Key | £2.05 | |
| 42 | 2 610 996 932 | Bearing Sleeve | £2.33 | |
| 43 | 2 610 355 293 | Screw | £0.00 |
NOT AVAILABLE
|
| 44 | 1 609 902 679 | Screw | £1.00 | |
| 45 | 2 610 996 875 | Torsion Spring | £1.00 | |
| 46 | 2 610 996 874 | Locking Lever | £7.76 | |
| 47 | 2 610 996 876 | Shoulder Screw | £1.00 | |
| 48 | 2 610 996 870 | Clamping Flange | £11.64 | |
| 49 | 2 610 996 871 | Clamping Flange | £7.37 |
NOT AVAILABLE
|
| 50 | 2 610 358 858 | Nut | £2.33 | |
| 51 | 2 610 996 879 | Wing Screw | £2.05 | |
| 52 | 2 610 996 878 | Cover Plate | £3.36 |
NOT AVAILABLE
|
| 53 | 1 609 902 699 | Screw | £1.00 | |
| 54 | 2 610 996 877 | Cover Plate | £16.29 |
NOT AVAILABLE
|
| 55 | 2 610 996 861 | Holding Plate | £101.63 |
NOT AVAILABLE
|
| 56 | 2 610 996 862 | Guiding Bolt | £4.01 | |
| 57 | 2 610 997 276 | Spring Retaining Ring | £1.00 | |
| 58 | 2 610 996 895 | Threaded Rod | £5.89 |
NOT AVAILABLE
|
| 59 | 2 610 998 573 | Spring Retaining Ring | £1.00 | |
| 60 | 2 610 997 221 | Bushing | £4.01 | |
| 61 | 2 610 996 896 | Toothed Gear | £4.19 | |
| 62 | 1 609 902 672 | Spring Washer | £1.00 | |
| 63 | 2 610 998 588 | Screw | £1.00 | |
| 64 | 2 610 358 149 | Nut | £1.00 | |
| 65 | 2 610 910 796 | Bolt | £2.45 | |
| 66 | 2 610 997 277 | Spring Retaining Ring | £1.00 | |
| 67 | 2 610 997 212 | Mounting Bracket | £2.45 | |
| 68 | 2 610 997 222 | Bushing | £1.00 | |
| 69 | 2 615 297 323 | Screw | £1.00 | |
| 70 | 2 610 355 325 | Spring Washer | £1.00 | |
| 71 | 2 610 996 897 | Shaft | £7.76 | |
| 72 | 2 610 996 933 | Threaded Bushing | £10.06 | |
| 73 | 2 610 996 938 | Bushing | £6.12 | |
| 74 | 2 615 303 023 | Screw | £0.00 | |
| 75 | 2 610 997 271 | Spring | £1.00 | |
| 76 | 2 610 998 550 | Plain Washer | £1.00 | |
| 77 | 2 610 997 299 | Plain Washer | £1.00 | |
| 78 | 2 610 997 298 | Nut | £4.01 | |
| 79 | 2 610 996 898 | Clamping Lever | £12.83 |
NOT AVAILABLE
|
| 80 | 2 610 996 899 | Handwheel | £9.05 | |
| 81 | 1 609 902 669 | Set Screw | £1.00 | |
| 82 | 2 610 996 925 | Knob | £1.00 | |
| 83 | 2 610 997 270 | Shoulder Screw | £2.05 | |
| 84 | 1 609 902 696 | Screw | £1.00 | |
| 85 | 2 610 996 927 | Pointer | £1.00 | |
| 86 | 2 610 355 570 | Washer | £3.03 | |
| 87 | 2 610 356 706 | Nut | £2.33 | |
| 89 | 2 610 996 929 | End Stop | £1.00 | |
| 90 | 2 610 996 859 | Housing | £55.92 | |
| 91 | 2 610 997 294 | Screw | £1.00 | |
| 92 | 2 610 996 924 | Switch Cover | £4.45 | |
| 93 | 2 610 358 846 | Rubber Bushing | £1.00 | |
| 94 | 2 610 996 930 | Pickup Clip | £2.33 | |
| 95 | 2 610 996 931 | Pickup Clip | £1.00 | |
| 96 | 2 610 910 047 | Screw | £1.00 | |
| 97 | 2 610 990 504 | Cable Clip | £1.00 | |
| 98 | 2 610 997 273 | Screw | £1.00 | |
| 99 | 2 610 997 246 | Nut | £1.00 | |
| 100 | 2 610 996 880 | Key | £4.01 | |
| 101 | 1 609 902 022 | Round Nut | £1.00 | |
| 102 | 2 610 996 922 | Holder | £1.00 | |
| 103 | 2 610 998 574 | Screw | £1.00 | |
| 104 | 2 610 998 567 | Clamp Bushing | £1.00 | |
| 105 | 2 610 998 568 | Connecting Cable | £4.78 | |
| 106 | 2 610 997 297 | Screw | £1.00 | |
| 107 | 2 610 910 013 | Washer | £2.05 | |
| 108 | 2 610 998 575 | Screw | £1.00 | |
| 109 | 2 610 996 894 | Bearing Pedestal | £4.01 | |
| 110 | 2 610 908 271 | Tapping Screw | £1.00 | |
| 111 | 2 610 998 587 | Screw | £1.00 | |
| 112 | 2 610 996 921 | Holding Bracket | £1.00 | |
| 113 | 2 610 996 913 | Pin | £3.36 | |
| 114 | 2 610 996 917 | Plate | £1.00 | |
| 115 | 2 610 996 914 | Gusset | £20.78 | |
| 116 | 2 610 997 275 | Pin | £1.00 | |
| 117 | 2 610 997 274 | Pin | £1.00 | |
| 118 | 2 610 996 918 | Set Screw | £2.05 | |
| 119 | 2 610 996 920 | Connecting Nut | £4.19 | |
| 120 | 2 610 996 919 | Rod | £6.12 | |
| 121 | 2 610 994 262 | Clamp | £2.05 | |
| 122 | 2 610 996 915 | Clamping Piece | £7.76 | |
| 123 | 2 610 355 272 | Nut | £3.03 | |
| 124 | 2 610 996 916 | Tommy Screw | £3.03 | |
| 125 | 2 610 997 217 | End Stop | £2.05 | |
| 126 | 2 610 996 857 | Table Plate | £229.78 | |
| 127 | 2 610 996 855 | Mounting Rail | £3.48 | |
| 128 | 2 610 996 912 | Fixing Plate | £4.19 | |
| 129 | 2 610 996 856 | Mounting Rail | £2.33 | |
| 131 | 2 615 303 029 | Screw | £1.00 | |
| 132 | 2 610 320 339 | Screw | £1.00 | |
| 133 | 2 610 996 941 | Pointer | £1.00 |
NOT AVAILABLE
|
| 134 | 2 610 996 853 | Profile Rail | £34.97 |
NOT AVAILABLE
|
| 135 | 2 610 996 923 | Cover | £1.00 | |
| 138 | 2 610 908 270 | Washer | £1.00 | |
| 139 | 2 610 997 244 | Cover | £2.05 | |
| 140 | 2 610 996 926 | End Stop | £1.00 | |
| 141 | 2 610 997 218 | Cover | £1.00 | |
| 142 | 2 610 996 854 | Profile Rail | £23.57 |
NOT AVAILABLE
|
| 143 | 2 610 997 216 | Cover | £1.00 | |
| 144 | 2 610 996 858 | Table Plate | £71.84 | |
| 145 | 2 610 996 928 | Retaining Plate | £1.66 | |
| 146 | 2 610 352 107 | Bolt | £1.00 | |
| 147 | 2 610 304 772 | Nut | £1.00 | |
| 148 | 2 610 998 577 | Protective Cover | £5.30 | |
| 149 | 2 610 997 808 | Rule | £3.50 | |
| 150 | 2 610 997 807 | Sticker | £2.05 | |
| 151 | 2 610 997 227 | Insert | £25.04 | |
| 152 | 2 610 997 283 | Stud | £1.00 | |
| 153 | 2 610 996 911 | Holding Spring | £1.00 | |
| 154 | 2 610 996 900 | Protective Cover | £27.69 | |
| 155 | 2 610 997 285 | Slide Nut | £0.00 | |
| 156 | 2 610 996 902 | Roller Pin | £1.00 | |
| 157 | 2 610 998 578 | Toothed Knife | £14.75 |
NOT AVAILABLE
|
| 158 | 2 610 998 579 | Clamp Handle | £4.78 | |
| 159 | 2 610 909 178 | Plain Washer | £1.00 | |
| 160 | 2 610 996 936 | Mitre Gauge | £27.69 | |
| 161 | 1 609 902 697 | Screw | £1.00 | |
| 162 | 2 610 908 272 | Nut | £1.00 | |
| 165 | 2 610 996 937 | Guide Bar | £13.34 | |
| 166 | 2 610 997 214 | Pointer | £2.05 | |
| 167 | 2 610 997 215 | End Stop | £1.00 | |
| 168 | 2 615 296 243 | Screw | £1.00 | |
| 172 | 2 610 997 291 | Pin | £1.00 | |
| 182 | 2 610 996 891 | Slide Rail | £0.00 |
NOT AVAILABLE
|
| 183 | 2 610 998 570 | Bracket | £2.49 |
NOT AVAILABLE
|
| 184 | 2 610 358 892 | Cover | £2.05 | |
| 185 | 2 610 996 887 | Rod | £7.01 | |
| 186 | 1 609 902 703 | Retaining Pin | £1.00 | |
| 187 | 2 610 996 888 | Spring | £1.00 | |
| 188 | 2 610 996 883 | Profile Rail | £41.02 | |
| 189 | 2 610 358 802 | Washer | £1.00 | |
| 190 | 2 610 996 884 | Housing | £0.00 |
NOT AVAILABLE
|
| 191 | 2 610 996 886 | Locking Lever | £1.00 | |
| 192 | 2 610 997 292 | Pin | £1.00 | |
| 193 | 2 610 996 885 | Clamping Plate | £4.01 | |
| 194 | 2 610 997 240 | Clamping Piece | £2.05 | |
| 195 | 2 610 997 293 | Screw | £1.00 | |
| 196 | 2 610 997 245 | Adjusting Screw | £2.33 | |
| 197 | 2 610 911 920 | Rubber Bushing | £1.00 | |
| 198 | 2 610 998 551 | Hexagon Socket Screw Key | £2.33 | |
| 199 | 2 610 998 580 | Screw | £1.00 | |
| 200 | 2 610 328 617 | Screw | £1.00 | |
| 201 | 2 610 992 380 | Spring Retaining Ring | £1.00 | |
| 202 | 2 610 997 817 | Adhesive Label | £2.51 | |
| 203 | 2 610 358 932 | Connector | £1.00 | |
| 204 | 2 615 303 020 | Seal | £1.00 | |
| 205 | 2 615 303 026 | Screw | £1.00 | |
| 206 | 2 610 967 422 | Screw | £1.00 | |
| 207 | 2 610 911 933 | Connector | £1.00 | |
| 208 | 2 610 998 593 | Spring | £1.00 | |
| 209 | 2 610 912 588 | Plain Washer | £1.00 | |
| 211 | 2 610 912 589 | Sticker | £2.51 | |
| 212 | 2 610 341 465 | Washer | £0.00 |
NOT AVAILABLE
|
| 213 | 2 610 913 192 | Compression Spring | £0.00 |
NOT AVAILABLE
|
| 670 | 2 610 919 255 | Fitting | £4.01 | |
| 801 | 2 610 997 205 | Protective Cover | £46.05 | |
| 802 | 2 610 997 206 | Edge Guide | £105.14 | |
| 803 | 2 610 997 204 | Mitre Fence | £41.02 | |
| 810 | 2 610 997 207 | Carbon-brush Set | £10.06 | |
| 820 | 1 609 902 087 | Clamp Handle | £50.31 | |
| 821 | 1 609 902 077 | Rod | £4.78 | |
| 822 | 1 609 902 078 | Locking Clamps | £21.65 |
Circular Saw Blade - LU2C 1200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Cross Cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Circular Saw Blade - LU3D 0400
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Triple Chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Circular Saw Blade - LU3A 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Circular Saw Blade - LU3E 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Circular Saw Blade - LP60M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Alternate bevel toothed blade for long grain and cross cutting of solid wood
Circular Saw Blade - LP80M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip toothed blade for aluminium and non ferrous metals. Work piece must be clamped dring cutting
Circular Saw Blade - LU1I 0400
Circular Saw Blade for DeWalt DW702 Circular Saw 96 t.c. teeth 250mm x 3.0mm x 30mm Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
Circular Saw Blade - LP20M 025
Circular Saw Blade for ELU DW744 Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Circular Saw Blade - LU2A 1700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 3.2mm x 30mm Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
Circular Saw Blade - LU1H 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 2.7mm x 30mm Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires less HP.
Circular Saw Blade - LU2B 0500
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
Circular Saw Blade - LU2B 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.
Circular Saw Blade - LU2D 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.5mm x 30mm Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
Circular Saw Blade - LU3B 0200
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial triple chip tooth saw blade for cutting laminated panels.Leaves an excellent finish and features noise reduction slots.
Circular Saw Blade - LU5D 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 3.5mm x 30mm Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
Circular Saw Blade - LU4A 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
Circular Saw Blade - LU1H 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 2.8mm x 30mm Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
Circular Saw Blade - LU2C 1300
Circular Saw Blade for DeWalt DW744 Circular Saw 100 t.c. teeth 250mm x 3.2mm x 30mm Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
Circular Saw Blade - LU1C 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 24 t.c. teeth 250mm x 2.6mm x 30mm Industrial alternative bevel saw blade with Perma Shield and anti kick back teeth for ripping soft and hardwoods with loose knots.
Circular Saw Blade for ELU TGS173 Circular Saw 40 t.c. teeth 250mm x 2.8mm x 30mm Combination rip and cross cut saw blade with alternate bevelled teeth for solid wood. Contract quality
Circular Saw Blade for ELU TGS173 Circular Saw 24 t.c. teeth 250mm x 2.8mm x 30mm A contract quality alternate bevel toothed ripping blade for cutting solid wood down the grain
Circular Saw Blade for ELU TGS173 Circular Saw 60 t.c. teeth 250mm x 2.8mm x 30mm Alternate bevel toothed blade for long grain and cross cutting of solid wood. Contract quality.
This model also has 22 accessories available.
Scroll down to view them.
