MTD 61002-161 — Oil seal (10 × 20 × 5 mm).

A compact replacement shaft seal sized 10 mm ID × 20 mm OD × 5 mm thickness, designed to keep lubricant in and dirt out on small spindles, gearboxes and steering/shaft assemblies. Simple press-fit installation into a mating bore; use a flat driver or seal installer to seat it squarely without damage.

Example applications (cross‑references found under the 61002‑161 number): Hustler and related walk‑behind/ride‑on mower service parts, and a variety of Danarm/Cobra/Lawnflite models — for example Cobra M48SPK, M53SPH/M53SPHPRO and several Danarm/Kazz and Lawnflite models listed under the same reference. These listings show 61002‑161 as the seal used in those spindles and housings. Keep one of these seals on hand when repairing mowers or other parts for power tools to replace a leaking or hardened seal quickly.

What you’re getting: the sized shaft oil seal (61002‑161) that directly replaces worn seals of the same dimensions — check the bore and shaft measurements (10 × 20 × 5 mm) on your machine before fitting to confirm compatibility.