Genuine Makita 650232-5 — Switch (TGL215CDT-1). Direct replacement switch assembly used in Makita belt sanders; sold as the single, original Makita switch unit for restoring trigger and lock-on function in affected tools.
Key facts and fitment
- Designed as the factory switch for Makita belt sander models 9910 and 9911; commonly shown as the same switch used in some GV-series models (example: GV5010) in Makita parts diagrams.
- Sometimes listed as a direct replacement for Makita reference 651285-7 in parts listings.
Specifics (measured/printed values shown in parts listings)
- Manufacturer designation: TGL215CDT-1 (Makita part 650232-5).
- Electrical/current rating shown in parts info: 8 A.
- Physical footprint/dimensions reported in spare-parts data (metric): base ~22.5 mm (length) × 16 mm (width) × 35 mm (height); actuator/key ~20 mm (length) × 12 mm (width) × 23 mm (height). Use these to confirm fit in the tool housing before installation.
Why this part
- Fits the original mounting and wiring positions shown in Makita exploded diagrams for the 9910/9911 series, so it restores the normal trigger action and lock-on behavior described in the 9910/9911 manual. Replacing this switch is the standard repair when the sander will not start, the trigger is intermittent, or the lock-on fails.
What you get
- One original Makita 650232-5 switch assembly (TGL215CDT-1), ready to install in compatible Makita 9910 / 9911 (and matching GV5010 listings). Check your tool’s parts diagram or the existing switch’s footprint and connector type against the dimensions above to confirm compatibility before fitting.
(Notes: specifications above come from Makita parts diagrams and technical listings for the 9910/9911 series.)
Jump straight to the Makita spare parts diagrams:
Browse our full range of Makita sander parts.
