Freud LU1E 0300
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 28 t.c. teeth 300mm x 2.8mm x 30mm An alternate bevel rip saw blade for soft and hardwoods with anti kickback design , giving a medium finish.
Cutting: Thin kerf ripping
Materials: Hardwoods
Materials: Softwood
Application: Softwood & hardwood ripping
Additional Features: Anti-Kickback
Bore: 30
Width: 2.80
Portable: 0
Diameter: 300
Teeth: 28
Size: 300mm x 2.8mm x 30mm
Teeth: Circular Saw 28 t.c. teeth
Alternate Part No.: F03FS04634
Usage: An alternate bevel rip saw blade for soft and hardwoods with anti kickback design , giving a medium finish.
Freud LU1H 0900
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 54 t.c. teeth 300mm x 2.7mm x 30mm Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires less HP.
Materials: Hardwoods
Materials: Softwood
Application: Softwood & hardwood ripping
Bore: 30
Cutting: Ripping and Cross cutting
Application: Softwood & hardwood cross cutting
Portable: 0
Materials: Chipboard
Diameter: 300
Teeth: 54
Width: 2.70
Application: Premium or exotic wood ripping
Application: Premium or exotic wood cross cutting
Usage: Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires
Size: 300mm x 2.7mm x 30mm
Alternate Part No.: F03FS04659
Teeth: Circular Saw 54 t.c. teeth
Freud LU1H 1100
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 72 t.c. teeth 300mm x 2.8mm x 30mm Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
Materials: Hardwoods
Materials: Softwood
Bore: 30
Width: 2.80
Application: Softwood & hardwood cross cutting
Cutting: Cross Grain Cutting
Portable: 0
Materials: Chipboard
Diameter: 300
Teeth: 72
Application: Premium or exotic wood cross cutting
Materials: Premium or Exotic Hardwoods
Usage: Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
Teeth: Circular Saw 72 t.c. teeth
Size: 300mm x 2.8mm x 30mm
Alternate Part No.: F03FS04663
Freud LU1I 0600
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 96 t.c. teeth 300mm x 3mm x 30mm Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
Additional Features: Perma-Shield
Bore: 30
Portable: 0
Diameter: 300
Teeth: 96
Width: 3.00
Cutting: High finish
Materials: High Finish Mitre
Application: High finish mitre
Teeth: Circular Saw 96 t.c. teeth
Usage: Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
Size: 300mm x 3mm x 30mm
Alternate Part No.: F03FS04682
Freud LU2A 2100
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 40 t.c. teeth 300mm x 3.2mm x 30mm Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
Cutting: Thin kerf ripping
Materials: Hardwoods
Materials: Softwood
Bore: 30
Teeth: 48
Portable: 0
Materials: Chipboard
Diameter: 300
Width: 3.20
Additional Features: Low Noise
Teeth: Circular Saw 40 t.c. teeth
Usage: Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS04840
Freud LU2B 0900
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 60 t.c. teeth 300mm x 3.2mm x 30mm Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
Materials: Hardwoods
Materials: Softwood
Application: Softwood & hardwood ripping
Bore: 30
Cutting: Ripping and Cross cutting
Application: Softwood & hardwood cross cutting
Teeth: 60
Portable: 0
Application: Raw chipboard
Diameter: 300
Width: 3.20
Materials: MDF
Usage: Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
Teeth: Circular Saw 60 t.c. teeth
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS04884
Freud LU2B 1200
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 72 t.c. teeth 300mm x 3.2mm x 30mm Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.
Usage: Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.
Size: 300mm x 3.2mm x 30mm
Teeth: Circular Saw 72 t.c. teeth
Alternate Part No.: F03FS04889
Freud LU2C 1500
Circular Saw Blade
Circular Saw Blade for DeWalt DW712N Circular Saw 96 t.c. teeth 300mm x 3.2mm x 30mm Industrial cross cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Materials: Hardwoods
Materials: Softwood
Bore: 30
Cutting: Cross Grain Cutting
Portable: 0
Diameter: 300
Teeth: 96
Width: 3.20
Additional Features: Low Noise
Materials: Coated Chipboard
Teeth: Circular Saw 96 t.c. teeth
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS04927
Usage: Industrial cross cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Freud LU2C 1700
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 120 t.c. teeth 300mm x 3.2mm x 30mm Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
Materials: Hardwoods
Materials: Softwood
Bore: 30
Cutting: Cross Grain Cutting
Portable: 0
Materials: Chipboard
Application: Raw chipboard
Diameter: 300
Width: 3.20
Application: Premium or exotic wood cross cutting
Materials: Coated Chipboard
Application: Coated chipboard
Teeth: 120
Application: Plywood
Usage: Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS04932
Teeth: Circular Saw 120 t.c. teeth
Freud LU2D 0900
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 96 t.c. teeth 300mm x 2.7mm x 30mm Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
Materials: Hardwoods
Materials: Softwood
Bore: 30
Cutting: Cross Grain Cutting
Portable: 0
Diameter: 300
Teeth: 96
Additional Features: Low Noise
Width: 2.70
Materials: Coated Chipboard
Usage: Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
Teeth: Circular Saw 96 t.c. teeth
Size: 300mm x 2.7mm x 30mm
Alternate Part No.: F03FS04959
Freud LU3A 0300
Circular Saw Blade
Circular Saw Blade for DeWalt DW712N Circular Saw 96 t.c. teeth 300mm x 3.2mm x 30mm Industrial alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Bore: 30
Portable: 0
Materials: Chipboard
Application: Raw chipboard
Diameter: 300
Teeth: 96
Width: 3.20
Additional Features: Low Noise
Materials: MDF
Materials: Coated Chipboard
Cutting: Laminated panels
Application: Plywood
Application: Coated MDF
Teeth: Circular Saw 96 t.c. teeth
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS05064
Usage: Industrial alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Freud LU3D 0600
Circular Saw Blade
Circular Saw Blade for DeWalt DW712N Circular Saw 96 t.c. teeth 300mm x 3.2mm x 30mm Industrial triple chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Bore: 30
Portable: 0
Materials: Chipboard
Diameter: 300
Teeth: 96
Width: 3.20
Additional Features: Low Noise
Materials: MDF
Materials: Coated Chipboard
Cutting: Laminated panels
Materials: Plywood
Teeth: Circular Saw 96 t.c. teeth
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS05093
Usage: Industrial triple chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Freud LU3E 0300
Circular Saw Blade
Circular Saw Blade for DeWalt DW712N Circular Saw 72 t.c. teeth 300mm x 3.2mm x 30mm Industrial triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Additional Features: Perma-Shield
Bore: 30
Portable: 0
Materials: Chipboard
Application: Raw chipboard
Diameter: 300
Teeth: 72
Width: 3.20
Materials: MDF
Materials: Coated Chipboard
Cutting: Laminated panels
Materials: Plywood
Application: Plywood
Application: Coated MDF
Size: 300mm x 3.2mm x 30mm
Alternate Part No.: F03FS05113
Teeth: Circular Saw 72 t.c. teeth
Usage: Industrial triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Freud LU4A 0200
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 96 t.c. teeth 300mm x 2.8mm x 30mm Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
Bore: 30
Width: 2.80
Portable: 0
Diameter: 300
Teeth: 96
Cutting: Plastics
Application: Plastics
Materials: Plexiglass
Teeth: Circular Saw 96 t.c. teeth
Usage: Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
Size: 300mm x 2.8mm x 30mm
Alternate Part No.: F03FS05165
Freud LU5D 1200
Circular Saw Blade
Circular Saw Blade for ELU ETS3001 Circular Saw 96 t.c. teeth 300mm x 3.5mm x 30mm Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
Bore: 30
Portable: 0
Diameter: 300
Teeth: 96
Cutting: Plastics
Materials: Non-Ferrous metals
Width: 3.50
Application: Non-ferrous metals
Teeth: Circular Saw 96 t.c. teeth
Usage: Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
Size: 300mm x 3.5mm x 30mm
Alternate Part No.: F03FS05301
Scheppach 75090100
UK Male To Continental Female Plug 1.5m Cable
1.5m cable, 13 amp UK 3-pin male plug to continental female. This type of plug is used with many Scheppach machines. (Often described as a "Scheppach plug")