Enhance your Bosch 0 601 582 437 with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 4 | 1 903 201 042 | Needle Roller | £2.05 | |
| 5 | 2 600 108 077 | Felt Washer | £1.00 | |
| 6 | 2 600 500 002 | Cupped Washer | £1.00 | |
| 7 | 2 600 905 021 | Deep-groove Ball Bearing | £6.36 | |
| 8 | 2 916 660 008 | Spring Retaining Ring | £2.05 | |
| 9 | 2 600 400 008 | Receptacle | £1.00 | |
| 12 | 2 600 101 616 | Shim | £2.45 | |
| 13 | 2 600 913 036 | Needle-roller Cage | £1.00 | |
| 14 | 2 603 201 037 | Needle Roller | £1.00 | |
| 15 | 2 606 320 048 | Eccentric Cog Wheel | £15.94 | |
| 16 | 2 600 102 653 | Shim | £1.00 | |
| 17 | 2 600 100 515 | Shim | £2.33 | |
| 17 | 2 600 100 516 | Shim | £2.05 | |
| 18 | 2 601 923 004 | Fork Lever | £2.45 | |
| 19 | 2 916 080 007 | Locking Washer | £2.33 | |
| 20 | 2 600 102 652 | Shim | £1.00 | |
| 21 | 2 600 100 627 | Shim | £1.00 | |
| 21 | 2 600 100 628 | Shim | £1.00 | |
| 21 | 2 600 100 625 | Shim | £2.33 | |
| 21 | 2 600 100 626 | Shim | £1.00 | |
| 22 | 2 601 098 003 | Counterweight | £6.12 | |
| 23 | 2 600 309 009 | Spacer Sleeve | £1.00 | |
| 25 | 2 600 100 576 | Shim | £2.05 | |
| 25 | 2 600 100 575 | Shim | £2.05 | |
| 25 | 2 600 100 577 | Shim | £1.00 | |
| 26 | 2 916 080 910 | Locking Washer | £2.29 | |
| 29 | 2 600 100 568 | Shim | £1.00 | |
| 29 | 2 600 100 569 | Shim | £0.00 |
NOT AVAILABLE
|
| 32 | 2 602 305 042 | Air Eliminator | £1.00 | |
| 34 | 2 600 590 006 | Ratchet Cap | £1.00 | |
| 35 | 2 602 026 036 | Rotary Knob | £3.36 |
NOT AVAILABLE
|
| 36 | 2 916 080 008 | Locking Washer | £1.00 |
NOT AVAILABLE
|
| 37 | 2 602 026 037 | Rotary Knob | £2.45 | |
| 38 | 2 600 116 006 | Spring Retaining Ring | £1.00 | |
| 39 | 2 601 015 050 | Seal | £2.33 | |
| 41 | 2 603 410 048 | Thread-forming Tap. Screw | £1.00 | |
| 42 | 2 604 613 000 | Compression Spring | £1.00 | |
| 43 | 2 601 322 010 | Guide Bracket | £10.88 | |
| 45 | 2 602 329 011 | Clamping Saddle | £3.03 | |
| 46 | 2 601 321 022 | Sliding Piece | £0.00 |
NOT AVAILABLE
|
| 47 | 2 603 421 040 | Countersunk-head Screw | £1.07 | |
| 48 | 2 600 112 031 | Supporting Disc | £1.00 | |
| 49 | 2 600 290 017 | Seal Ring | £1.00 | |
| 50 | 2 600 101 612 | Shim | £1.00 | |
| 53 | 2 603 400 000 | Clamp Screw | £3.03 | |
| 57 | 2 600 116 011 | Locking Washer | £2.05 | |
| 58 | 2 917 530 101 | Straight Pin | £2.45 | |
| 59 | 2 916 080 005 | Locking Washer | £2.50 |
NOT AVAILABLE
|
| 60 | 2 603 490 024 | Torx Oval-head Screw | £1.00 | |
| 62 | 2 915 011 007 | Hex Nut | £1.00 | |
| 63 | 2 608 000 073 | Base Plate | £17.37 | |
| 64 | 2 601 030 007 | Profile Beading | £2.05 | |
| 65 | 2 910 141 197 | Hex Socket Head Cap Screw | £1.00 | |
| 68 | 2 603 410 049 | Thread-forming Tap. Screw | £1.00 | |
| 69 | 2 914 551 176 | Microencapsulated Screw | £1.00 | |
| 70 | 2 605 730 033 | Suction Nozzle | £2.33 | |
| 71 | 2 604 616 001 | Compression Spring | £1.00 | |
| 72 | 2 914 501 022 | Screw And Washer Assembly | £1.00 | |
| 73 | 2 605 702 002 | Flanged Fitting | £2.45 | |
| 74 | 2 603 231 002 | Handle | £10.06 | |
| 75 | 2 600 421 000 | Ratchet Sleeve | £5.30 | |
| 77 | 2 600 100 032 | Shim | £1.00 | |
| 78 | 2 601 110 764 | Sticker | £0.00 | |
| 79 | 2 601 099 013 | Plate | £3.36 | |
| 80 | 2 601 099 029 | Plate | £3.36 | |
| 81 | 2 910 021 116 | Socket Head Cap Screw | £2.05 | |
| 82 | 2 601 320 022 | Covering Hood | £1.00 | |
| 102 | 2 604 220 709 | Field | £21.65 | |
| 102 | 2 604 220 438 | Field | £21.65 | |
| 103 | 2 604 010 578 | Armature | £41.02 | |
| 104 | 2 607 200 093 | On-off Switch | £9.05 | |
| 105 | 2 604 460 074 | Power Supply Cord | £15.05 | |
| 106 | 2 600 703 028 | Grommet | £1.00 | |
| 106 | 2 600 703 027 | Grommet | £1.00 | |
| 106 | 2 600 703 026 | Grommet | £1.00 | |
| 107 | 2 601 035 001 | Cable Clip | £1.00 | |
| 109 | 2 601 110 787 | Sticker | £0.00 | |
| 112 | 2 607 329 104 | Suppression Capacitor | £7.01 | |
| 113 | 1 900 905 018 | Deep-groove Ball Bearing | £13.58 | |
| 116 | 2 601 323 021 | Brush Holder | £3.27 | |
| 118 | 2 603 410 001 | Socket Head Cap Screw | £1.00 | |
| 119 | 2 603 490 022 | Torx Oval-head Screw | £1.00 | |
| 120 | 2 601 110 763 | Sticker | £1.00 | |
| 129 | 2 910 601 321 | Tapping Screw | £1.00 |
NOT AVAILABLE
|
| 130 | 2 602 026 015 | Switch Handle | £1.00 | |
| 131 | 1 907 950 006 | Offset Screwdriver | £3.36 | |
| 132 | 2 607 230 010 | Speed Governor | £28.57 |
NOT AVAILABLE
|
| 133 | 2 604 465 106 | Suppressor Box | £3.36 | |
| 134 | 2 604 448 044 | Connecting Cable | £1.00 | |
| 135 | 2 604 448 045 | Cable | £0.00 |
NOT AVAILABLE
|
| 136 | 2 604 448 046 | Connecting Cable | £1.00 | |
| 137 | 2 604 448 040 | Connecting Cable | £2.33 | |
| 139 | 2 910 611 006 | Tapping Screw | £2.29 | |
| 150 | 2 600 101 022 | Shim | £1.00 | |
| 150 | 2 600 101 020 | Shim | £1.00 | |
| 150 | 2 600 101 027 | Shim Ring | £1.00 | |
| 151 | 2 600 150 004 | Shim | £2.05 | |
| 152 | 2 603 435 015 | Recessed-head Screw | £2.05 | |
| 153 | 2 602 319 005 | Adjusting Slide | £1.00 | |
| 154 | 2 601 328 045 | Cover Disc | £2.05 | |
| 155 | 2 603 490 017 | Torx Oval-head Screw | £1.00 | |
| 156 | 2 604 652 009 | Spiral Spring | £1.00 | |
| 157 | 2 600 508 037 | Housing Cover | £5.30 | |
| 171 | 2 600 301 046 | Sintered-metal Bushing | £3.03 | |
| 172 | 2 600 301 045 | Bushing | £2.45 | |
| 199 | 1 601 110 265 | Sticker | £2.39 |
NOT AVAILABLE
|
| 658 | 2 910 861 118 | Countersunk-head Screw | £1.00 | |
| 659 | 2 600 210 033 | O-ring | £0.00 | |
| 710 | 2 608 598 001 | Support Clamp | £0.00 | |
| 801 | 2 605 808 915 | Gear Housing | £30.51 | |
| 810 | 2 605 108 904 | Motor Housing | £19.05 | |
| 811 | 2 604 320 912 | Carbon-brush Set | £7.01 | |
| 824 | 2 601 072 901 | Eccentric Disc | £5.30 | |
| 831 | 2 600 917 900 | Needle Bearing | £6.12 | |
| 835 | 1 607 000 386 | Power Supply Cord | £15.30 | |
| 840 | 2 605 808 916 | Gear Cover | £0.00 |
NOT AVAILABLE
|
| 844 | 2 600 780 913 | Lifting Rod | £0.00 |
NOT AVAILABLE
|
| 851 | 2 601 015 901 | Sealing Plate | £2.45 | |
| 854 | 2 601 321 902 | Roller Lever | £11.31 |
NOT AVAILABLE
|
| 855 | 2 600 326 903 | Roller Set | £7.42 | |
| 861 | 2 605 500 900 | Fan Cover | £3.36 | |
| 888 | 1 601 106 032 | Nameplate | £2.57 |
Basic cut wood blades for general cutting of wood and plastics.
Basic cut wood baldes for hardboard & fibreboard to 3mm hardwood, plastics & ply to 35mm
Basic cut wood blades ideal for curve cutting of wood and plastics. (Scroll Cutting)
Clean cut wood blades for hardboard & fibreboard to 8mm harwood,plastics & ply to 35mm. (Fast Cutting)
Clean cut wood blades for fast fine cut in wood and plastics, especially suited to plywood.
Clean cut wood blades for fast finish work in wood and plastics.
Clean cut wood blades for fast finish work in wood and plastics.
Clean cut wood blades ideal for curve cuttin of wood and plastics.
Clean cut wood blades for laminated wood and decorative veneer finishing. (Reverse tooth pattern)
Clean cut wood blades ideal for scroll cutting of wood and plastics. (Fast cut)
Speed cut wood blades for fast cutting of wood and plastics. (Fast rough cut)
Speed cut wood blades ideal for fast cutting of thick materials.
Speed cut wood blades ideal for cutting thick materials. (Fast cut)
Basic cut metal blades for mild steel, stainless stell and tough plastics, especially suited for thin plate.
Basic cut metal blades for mild steel, medium thick metal plate, wood, decorative
Basic cut metal blades for thin mild steel, stainles steel, very thin metal plate.
Basic cut metal blades for curve cutting in harwoods, metals and plastics.
Basic cut metal blades for curve cutting and scroll in mild steel. Non-ferrous.
Basic cut metal blades for mild steel, tough plastics. Especially thin metal plate.
Basic cut metal blades for medium-thick metal plate, pipes and profiles. Also aluminium.
Basic cut metal blades for finish work in plastics and aluminium
Flexible cut metal blades for cladding to 80mm and sandwich material. (Flexible blade)
Flexible cut metal blades for sandwich materials. (Extra long deep profiles)
Flexible cut metal blades for thin sheet metal pipe non-ferrous and cladding.
Specialized blades for splinter free cuts in wood, requiring no sanding. Up and down cut blade for finish on top surfaces.
Specialized blades for hardwood, thick mild steel plate and tough plastics. Tungsten carbide grit tooth.
Specialized blades ideal for glass fibre and reinforced plastics. TCT teeth for very long tough materials.
Specialized blades ideal for glass fibre and reinforced plastics.
Specialized blades ideal for cutting of paper, cork, ruber and leather.
Specialized blades for thin metal plate, pipes and profiles. Also aluminium plasctics.
Specialized blades for straight cut in laminates, wooden flooring and decorative woods. (Splinter free)
Specialized blades for scroll cut in laminates, wooden flooring and decorative woods. (Splinter free)
Super express blades for super express superior performance with cordless saws. Wood.
Super express blades for super express superior performance with cordless saws. Metal.
Super express blades for super express superior performance with cordless saws. Universal.
Selection pack. Includes: 1 x B-06460, 1 x B-06476, 1 x B-06482
Selection pack. Includes: 1 x A-85737, 1 x A-85743, 1 x A-85656, 1 x A-85684, 1 x B10S
Long Reach Jigsaw Screwdriver - 1609200265
Long reach screwdriver used with all Bosch jigsaws without SDS system. This screwdriver will reach the flat head screw at the bottom of the lifting rod/tube.
This model also has 45 accessories available.
Scroll down to view them.
