Enhance your DeWalt DW744 Type 1 with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 |
This part is unavailable
Notify Me
|
|||
| 2 | 385940-00 | HANDLE | £1.58 | |
| 3 | 330045-13 | SCREW | £1.88 | |
| 4 | 387689-00 | RAIL | £0.00 |
NOT AVAILABLE
|
| 5 | 387689-00 | RAIL | £0.00 |
NOT AVAILABLE
|
| 6 | 153453-00 | BEARING SA | £0.00 |
NOT AVAILABLE
|
| 7 | 153472-00 | SHAFT | £0.00 | |
| 8 | 153434-00 | PINION | £0.00 | |
| 9 | 153433-01 | KNOB | £0.00 | |
| 10 | 153499-02 | INDICATOR | £11.30 |
NOT AVAILABLE
|
| 11 | 153381-01 | ARM | £0.00 | |
| 12 | 153384-00 | LINK | £0.00 | |
| 13 | 153385-00 | LOCKING PIN | £0.00 | |
| 14 | 153386-01 | LOCKING PIN | £0.00 |
NOT AVAILABLE
|
| 15 | 153406-00 | PLATE | £0.00 | |
| 16 | 153460-00 | SCREW | £1.88 | |
| 17 | 153537-00 | WASHER | £0.00 | |
| 18 | 330045-12 | SCREW | £0.00 | |
| 19 | 330045-24 | SCREW | £1.88 | |
| 20 | 153459-01 | BOLT | £0.00 | |
| 21 | 385137-00 | NUT | £1.88 | |
| 22 | 330016-04 | WASHER | £1.88 | |
| 23 | 330021-03 | NUT | £0.00 | |
| 24 | 98162-18 | PIN | £1.67 | |
| 25 | 330022-02 | SCREW | £0.00 | |
| 26 | 330045-14 | SCREW | £1.88 | |
| 27 | 386420-01 | PINION | £0.00 |
NOT AVAILABLE
|
| 28 | 153541-00 | BRACKET | £0.00 | |
| 29 | 330045-15 | SCREW | £1.88 | |
| 30 | 153543-00 | LABEL | £0.00 | |
| 31 | 153547-01 | SUPPORT PLATE | £127.79 | |
| 32 | 153419-00 | LINK | £0.00 | |
| 33 | 153449-00 | SPACER | £0.00 | |
| 34 | 153447-00 | SPRING | £0.00 | |
| 35 | 330045-32 | SCREW | £1.88 | |
| 36 | 386158-00 | FOLLOWER | £0.00 | |
| 37 | 153473-00 | SCREW.SPECIAL | £0.00 |
NOT AVAILABLE
|
| 38 | 153446-00 | RETAINER | £0.00 | |
| 39 | 153441-00 | WASHER | £0.00 | |
| 40 | 380061-00 | WASHER | £0.00 | |
| 41 | 153442-00 | WASHER | £0.00 | |
| 42 | 153443-00 | BUSHING | £1.88 | |
| 44 | 153424-00 | BEARING BLOCK | £5.83 | |
| 45 | 330036-08 | PIN | £1.88 | |
| 46 | 153476-05SV | GEARCASE COVER | £222.01 | |
| 47 | 153403-01 | SHIM | £1.88 | |
| 48 | 153404-01 | PLATE | £0.00 |
NOT AVAILABLE
|
| 49 | 389198-00 | SCREW | £0.00 | |
| 50 | 153389-00 | O RING | £1.88 | |
| 51 | 153368-01 | GEARCASE | £0.00 | |
| 52 | 701297-00 | SEAL | £1.88 | |
| 53 | 99180-24 | SEAL | £0.00 | |
| 54 | 153431-00 | PAD | £1.88 | |
| 55 | 153432-00 | SPACER | £1.88 | |
| 56 | 85931-00 | BEARING | £1.67 | |
| 57 | 153402-00 | PIN | £0.00 | |
| 58 | 330045-16 | SCREW | £1.88 | |
| 59 | 137382-00 | SLEEVE | £0.00 |
NOT AVAILABLE
|
| 60 | 87205-00 | PLUG | £0.00 | |
| 61 | 389786-02 | FIELDCASE | £0.00 |
NOT AVAILABLE
|
| 62 | 330045-20 | SCREW | £1.88 | |
| 63 | 153400-00 | END CAP | £0.00 | |
| 64 | 330019-20 | SCREW | £1.88 | |
| 66 | 153527-00SV | ARMATURE SA | £0.00 |
NOT AVAILABLE
|
| 66 |
This part is unavailable
Notify Me
|
|||
| 67 | 144803-00 | CIRCLIP | £1.88 | |
| 68 | 868768-07 | BEARING | £8.23 | |
| 69 | 330003-09 | BEARING | £5.11 | |
| 70 | 400677-00 | CIRCLIP | £0.00 |
NOT AVAILABLE
|
| 71 | 144798-08 | FIELD 115V | £0.00 |
NOT AVAILABLE
|
| 71 | 144798-07 | FIELD | £0.00 |
NOT AVAILABLE
|
| 72 | 146723-01 | BAFFLE | £0.00 |
NOT AVAILABLE
|
| 73 | 145323-06 | BRUSH SA | £6.29 | |
| 74 | 147097-09 | BRUSH HOLDER SA | £16.28 | |
| 75 | 448084-01 | BRUSH CAP | £0.00 |
NOT AVAILABLE
|
| 76 | 330019-19 | SCREW | £1.88 | |
| 77 | 48822-00 | CABLE CLAMP | £0.00 | |
| 78 | 153511-00 | CABLE CLAMP | £0.00 | |
| 79 | 153398-00 | STOP | £2.18 | |
| 80 |
This part is unavailable
Notify Me
|
|||
| 81 | 330045-13 | SCREW | £1.88 | |
| 82 | 153637-01 | SCREW | £0.00 | |
| 84 | 153401-00 | POINTER | £2.57 | |
| 85 | 330045-44 | SCREW | £1.88 | |
| 86 | 153518-00 | BRACKET | £0.00 | |
| 87 |
This part is unavailable
Notify Me
|
|||
| 88 | 153388-00 | LEVER | £7.47 | |
| 89 | 330015-03 | NUT | £1.88 | |
| 90 | 153412-00 | CRANK KIT | £12.09 |
NOT AVAILABLE
|
| 91 | 153420-00 | HANDLE | £13.48 |
NOT AVAILABLE
|
| 92 | 153379-00 | BEARING BLOCK | £2.29 | |
| 94 | 153423-00 | ROD | £0.00 | |
| 95 | 153405-00 | BRACKET | £0.00 | |
| 97 | 153421-00 | CAM | £1.88 | |
| 99 | 153450-00 | WASHER THRUST | £0.00 | |
| 100 | 153451-00 | BEARING THRUST | £2.29 | |
| 102 | 153439-00 | NUT | £0.00 |
NOT AVAILABLE
|
| 103 | 330016-03 | WASHER | £1.88 | |
| 105 | 648899-00SV | SHROUD | £222.01 | |
| 106 | 153528-00 | ADAPTOR | £0.00 | |
| 109 | 330019-13 | SCREW | £1.88 | |
| 111 | 153478-01 | WASHER INNER CLAMP | £0.00 |
NOT AVAILABLE
|
| 112 | 386764-02 | OUTER FLANGE | £6.32 |
NOT AVAILABLE
|
| 113 | 153351-01 | BASE | £69.90 | |
| 114 | 153496-00 | FOOT | £0.00 | |
| 115 | 386588-00 | LABEL | £3.98 | |
| 116 | 153430-00 | WRENCH | £0.00 | |
| 117 | 392666-00 | NUT WING | £0.00 | |
| 118 | 153502-00 | BOLT | £0.00 | |
| 119 | 153503-00 | NUT | £0.00 | |
| 120 | 153512-00 | WRENCH | £0.00 |
NOT AVAILABLE
|
| 121 | 153460-01 | SCREW | £0.00 | |
| 122 |
This part is unavailable
Notify Me
|
|||
| 123 | 330019-05 | SCREW | £1.88 | |
| 124 | 596667-00 | COVER | £25.18 | |
| 125 | 330016-07 | WASHER | £1.88 | |
| 126 | 148641-00 | LOCK NUT | £1.88 | |
| 129 | 330019-02 | SCREW | £1.88 | |
| 132 | 386606-02 | GUARD SA | £58.36 |
NOT AVAILABLE
|
| 133 | 429801-00 | MITRE FENCE | £114.34 | |
| 134 | 388292-01SV | PLATE SA | £0.00 |
NOT AVAILABLE
|
| 135 | 390858-00 | CAM | £5.11 | |
| 138 |
This part is unavailable
Notify Me
|
|||
| 144 | 98003-25 | SCREW | £1.67 | |
| 145 | 98155-03 | NUT | £1.67 | |
| 146 | 99361-14 | WASHER | £0.00 | |
| 147 | 153387-00 | WASHER SPRING | £1.58 | |
| 149 | 386617-00 | SCALE | £5.80 |
NOT AVAILABLE
|
| 150 | 330045-05 | SCREW | £1.88 | |
| 151 | 385969-00 | GUARD LOWER | £2.33 | |
| 153 | 387435-00 | GUARD UPPER | £1.98 | |
| 154 | 386630-00 | NAMEPLATE | £1.58 | |
| 154 | 569037-00 | RATING PLATE | £4.24 | |
| 155 |
This part is unavailable
Notify Me
|
|||
| 156 | 386756-00 | ADAPTOR | £5.26 | |
| 157 | 147107-08 | KNOB | £1.88 | |
| 158 | 145332-00 | TERMINAL | £1.88 | |
| 159 | 388062-00 | SCREW | £2.08 | |
| 160 | 386823-00 | NUT | £1.67 | |
| 161 | 386615-00 | PLATE | £3.84 |
NOT AVAILABLE
|
| 162 | 147107-04 | KNOB | £3.58 |
NOT AVAILABLE
|
| 163 | 386616-00 | FENCE | £19.10 | |
| 164 | 330019-12 | SCREW | £1.88 | |
| 165 | 429731-00 | CABLE CLAMP | £3.32 | |
| 166 | 71025-00 | TIE | £0.00 | |
| 167 | 386604-00 | RIVING KNIFE | £25.80 | |
| 168 | 429915-00 | PLATE KIT | £10.36 | |
| 171 | 429915-00 | PLATE KIT | £10.36 | |
| 200 | 389276-00 | PUSHROD | £5.11 | |
| 800 | 583534-00 | GREASE | £142.31 | |
| 836 | 385369-00 | SHIM | £0.00 | |
Circular Saw Blade - LU2C 1200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Cross Cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
Circular Saw Blade - LU3D 0400
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Triple Chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
Circular Saw Blade - LU3A 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Circular Saw Blade - LU3E 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
Circular Saw Blade - LP60M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Alternate bevel toothed blade for long grain and cross cutting of solid wood
Circular Saw Blade - LP80M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip toothed blade for aluminium and non ferrous metals. Work piece must be clamped dring cutting
Circular Saw Blade - LU1I 0400
Circular Saw Blade for DeWalt DW702 Circular Saw 96 t.c. teeth 250mm x 3.0mm x 30mm Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
Circular Saw Blade - LP20M 025
Circular Saw Blade for ELU DW744 Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
Circular Saw Blade - LU2A 1700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 3.2mm x 30mm Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
Circular Saw Blade - LU1H 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 2.7mm x 30mm Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires less HP.
Circular Saw Blade - LU2B 0500
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
Circular Saw Blade - LU2B 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.
Circular Saw Blade - LU2D 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.5mm x 30mm Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
Circular Saw Blade - LU3B 0200
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial triple chip tooth saw blade for cutting laminated panels.Leaves an excellent finish and features noise reduction slots.
Circular Saw Blade - LU5D 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 3.5mm x 30mm Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
Circular Saw Blade - LU4A 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
Circular Saw Blade - LU1H 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 2.8mm x 30mm Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
Circular Saw Blade - LU2C 1300
Circular Saw Blade for DeWalt DW744 Circular Saw 100 t.c. teeth 250mm x 3.2mm x 30mm Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
Circular Saw Blade - LU1C 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 24 t.c. teeth 250mm x 2.6mm x 30mm Industrial alternative bevel saw blade with Perma Shield and anti kick back teeth for ripping soft and hardwoods with loose knots.
This model also has 19 accessories available.
Scroll down to view them.
