Please note: Due to Brexit our suppliers are experiencing delays with back ordered parts arriving from Europe therefore this may affect dispatch times on some orders. We are working closely with our suppliers to minimise delays where possible.

Makita DSP600ZJ Twin 18V LXT Brushless Plunge Saw with Makpac Case

The Makita DSP600ZJ is a brushless plunge saw that runs off of the Makita 18v LXT batteries (x2). Running off the Makita 36v DC motor drive system the DSP600ZJ is one of the most precise, powerful plunge saws around.


Using Automatic Torque Drive Technology, this saw can automatically change cutting speeds according to working conditions for prime excision. Speed can also be controlled by adjusting the dial. This product also features a Brushless motor, depth stopper for splinter-free cutting, Bevels -1 to 48 degrees, Positive stop for bevel adjustment and compatibility with a guide rail. Completely cord-free and using the latest soft start technology, this Makita Plunge Saw is easy to use with minimal start-up shock and smooth splinter-free cutting. Powered by 2x18 volt LXT batteries, the machine is operating with more power and less hassle due to no cords getting in the way.

Key Features
  • Makita built electronically controlled Brushless Motor delivers 6,300 RPM for maximum performance and 50% longer run time per charge
  • Automatic Torque Drive Technology (ADT) automatically changes the cutting speed according to load conditions for optimum operation
  • Powered by 2x 18 volt LXT batteries; more power, speed and run time without the hassles of a cord
  • Variable speed control dial (2,500 - 6,300 RPM) for optimum performance in a variety of materials
  • Close to the wall cutting for expanded cutting applications
  • Large cutting capacity (56mm at 0º; and 40mm at 45º)
  • Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
  • Electronic speed control maintains constant speed under load for smooth cutting
  • Soft start feature for smooth start-ups
  • Easy-to-set depth adjustment with large scale
  • Smooth and convenient plunge release lever for operator comfort
  • Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts
  • On-board hex wrench for fast and easy blade changes
  • Locking lever holds the blade in position so that the wrench can be inserted through the hole in the blade case for easier blade installation
  • Built-in depth stop allows a preliminary first cut of 2 to 3mm to be performed prior to cutting through the entire material for clean and splinter-free cutting
  • Precise straight and 45º bevel cuts as the position of the blade enters the material on the same sight line when using a guide rail (sold separately)
  • 3-stage L.E.D. gauges indicate battery charge levels
  • Rubberised soft grip handle provides increased comfort on the job
  • Large rear dust port directs material away from the operator and easily connects to a vacuum system
  • Compatible guide rail system (sold separately) interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting
  • Slide lever on saw base designed to engage the optional guide rail (sold separately) when bevel cutting for stability
  • Electric brake for maximum productivity
  • Compact and ergonomic design and lightweight for reduced operator fatigue

In the Box
  • 1x DSP600Z Plunge Saw Body Only
  • 1x B-57364 165mm x 20mm Saw Blade
  • 1x Hex Wrench
  • 1x Makpac Type 4 Carry Case with Inlay

  • Battery Type - Lithium-ion
  • Body only machine - Yes
  • Voltage - 36 (18V x2) v
  • Blade Diameter - 165 mm
  • Max Cut @ 0º - 56 mm
  • Max Cut @ 45º - 40 mm
  • Bore (B) - 20 mm
  • Noise sound pressure - 92 dB(A)
  • Noise sound power - 103 dB(A)
  • Noise K factor - 3 dB(A)
  • No Load Speed - 2,500 - 6,300 rpm
  • Vibration K factor - 1.5 m/sec²
  • Vibration: Cutting Wood - 2.5 m/sec²
  • Net weight - 4.4 - 5.1 kg


As standard Makita offer a 1 year manufactures’ warranty on machines from the date of purchase

The 1 year warranty can be extended to a 3 year warranty* with online registration

All Makita products are thoroughly inspected before they leave the factory to ensure they meet the highest of standards but on rare occasions a machine may develop a defect, if this happens, don't worry, Makita's warranty system is one of the best around.

Makita services agents are located across the country and will be able to repair a faulty machine under warranty. Use this tool to find your nearest agent: Makita Dealer Locator.

If a suitable dealer can not be located then the Makita returns form can be used to arrange a free of charge collection of your machine for inspection by Makita.

*Please note:

  • Registration for Makita's extended 3 year warranty is only available within 30 days of the purchase date.
  • 3 year warranty is not available for Batteries, Battery Chargers, Accessories, Petrol Powered Products, Production Tools and Air Tools and Compressors.  
  • When filling out the 'Makita Dealer' section of the 3 year warranty form please enter 'J CARR & SON LTD'.
  • As well as providing a 3 year warranty certificate, proof of purchase will also be required, so please keep your receipt.

*This guarantee does not apply where:

  • Repairs have been made or attempted by others.
  • Repairs are required because of normal wear and tear.
  • The tool has been abused, misused or improperly maintained. 
  • Alterations have been made to the tool.
  • This guarantee does not affect your statutory rights.


  • We aim to despatch all power tool orders processed before 2pm on the same day for a next day delivery.
  • We offer free delivery on all power tool orders over £99.
  • Parcels with a cost of up to £150 are sent via Royal Mail on a first class Signed For service that is delivered next day 98% of the time, this includes Saturdays.
  • Parcels with a value of over £150 are sent on a next working day, pre 12pm delivery service with DPD.
Please Enquire
Availability:In stockOut of stock

UK Next day delivery service available

Despatched same day on orders place before 2pm.
Free delivery on orders over £99

Our expert verdict


The Makita DSP600 uses brushless technology and a 36V system to achieve the same power as a mains machine but with the freedom of a cordless machine.

By continuing to browse this website you agree to our use of cookiesAccept