Enhance your Makita 4304T with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 911109-2 | PAN HEAD SCREW M4 X 8 BHS630 | £1.00 | |
| 1 | 912102-9 | *COUNTERSUNK SCREW M4X6 | £1.00 | |
| 2 | 182788-5 | HANDLE SET 4304T | £6.20 | |
| 3 | 415881-3 | *LEVER 51 4304T | £1.00 | |
| 3 | 416370-1 | LEVER 4304T/4334D | £1.00 | |
| 4 | 344331-0 | INNER LEVER 4304T/4334D | £1.80 | |
| 5 | 233101-1 | COMPRESSON SPRING 4 4304/DUX60 | £1.00 | |
| 6 | 810835-9 | CAUTION LABEL 4304T/4334D | £1.00 | |
| 7 | 415880-5 | LOCK ON LEVER 4304T | £1.00 | |
| 8 | 415159-4 | SPACER 8406C/4304/PP200 | £2.10 | |
| 9 | 651922-3 | SWITCH TG71B PC5000/5001C/KP0 | £11.10 | |
| 10 | 631182-3 | *CONTROLLER 110V 4304/4305/430 | £38.50 | |
| 10 | 631202-3 | *CONTROLLER 4304/4305 240V | £33.20 | |
| 10 | 631675-0 | CONTROLLER 110V 4304/4305/430 | £21.10 | |
| 10 | 631678-4 | CONTROLLER 4304/4305 240V | £21.10 | |
| 11 | 256221-4 | PIN 3 DST111/DST112/JR3020 | £1.00 | |
| 12 | 415158-6 | SWITCH LEVER JR3020/4304 | £3.20 | |
| 13 | 645145-3 | *CAPACITOR 0.22UF 4304T | £2.30 | |
| 13 | 645258-0 | *NOISE SUPPRESOR 4304T | £3.40 | |
| 14 | 265995-6 | TAPPING SCREW 4X18 | £1.00 | |
| 14 | 266121-0 | *TAPPING SCREW 4X18 | £1.00 | |
| 15 | 687063-9 | STRAIN RELIEF UH4570/55/5580/ | £1.00 | |
| 16 | 682502-4 | CORD GUARD 8-85 3707/N1923B | £1.00 | |
| 17 | 266120-2 | *TAPPING SCREW 4X20 | £1.00 | |
| 18 | 663514-6 | *POWER SUPPLY CORD 1.00-2-2.5 | £8.50 |
NOT AVAILABLE
|
| 18 | 692021-2 | POWER SUPPLY CORD 1.0-2-2.5 | £6.50 | |
| 19 | 322691-0 | GEAR SHAFT 4304/4305/4334D | £14.80 | |
| 20 | 253139-0 | THIN WASHER 8 LC1230/TW0350 | £1.00 | |
| 21 | 212043-2 | NEEDLE BEARING 810 4305/9920 | £1.90 | |
| 22 | 226428-6 | HELICAL GEAR 51 4304/4305/4331 | £31.30 | |
| 23 | 212043-2 | NEEDLE BEARING 810 4305/9920 | £1.90 | |
| 24 | 253792-2 | BLUE NARROW WASHER 26 4304 | £1.00 | |
| 25 | 344134-2 | PUSH PLATE 4304/4334D/4331D | £4.80 | |
| 26 | 344370-0 | *BALANCE PLATE 4304T | £2.80 | |
| 27 | 344370-0 | *BALANCE PLATE 4304T | £2.80 | |
| 27 | 344330-2 | BALANCE PLATE 4304/4334D/4306 | £4.20 | |
| 28 | 253792-2 | BLUE NARROW WASHER 26 4304 | £1.00 | |
| 29 | 152454-8 | CRANK COMP 4331D/4304/4305/T | £8.00 | |
| 30 | 212010-7 | NEEDLE BEARING 607 4304T/43BA | £7.80 | |
| 31 | 344232-2 | THRUST PLATE 4304/4305/4331D | £1.00 | |
| 32 | 310028-3 | SLIDER 4304/4305/T/4331D/4333D | £12.00 | |
| 33 | 316608-3 | HOLDER 4304/4305/4331D/4333D | £11.30 | |
| 34 | 151596-5 | *GEAR HOUSING COVER COMP 4304/ | £42.10 | |
| 34 | 153389-6 | GEAR HOUSING COVER COMP 4304/4 | £45.40 | |
| 34 | 159716-5 | *GEAR HOUSING COVER COMP4304/4 | £42.10 | |
| 35 | 322839-4 | CONNECTOR 4304T | £2.20 | |
| 36 | 415882-1 | *JOINT 4304T | £1.00 | |
| 36 | 416351-5 | JOINT 4304T/4305T/4334D | £1.00 | |
| 37 | 322826-3 | DRIVER ROD 4304T/4334D | £4.60 | |
| 38 | 266034-5 | CT SCREW M4X16 HS6100/DLS714 | £1.00 | |
| 39 | 266120-2 | *TAPPING SCREW 4X20 | £1.00 | |
| 40 | 151426-0 | *RETAINER COMP 4304/4305/4334D | £13.90 | |
| 40 | 152947-5 | RETAINER COMP 4304/4305/4334D | £9.40 | |
| 41 | 266147-2 | PT SCREW 4X55 4306/6826/27 | £1.00 | |
| 41 | 266115-5 | *TAPPING SCREW 4X55 | £1.00 | |
| 42 | 256693-3 | PIN 4 4304/4305/4333D/4334D | £3.00 | |
| 43 | 266053-1 | PT SCREW 4X35 VC3211M/BSS501 | £1.00 | |
| 43 | 266117-1 | *TAPPING SCREW 4X35 | £1.00 | |
| 44 | 182788-5 | HANDLE SET 4304T | £6.20 | |
| 45 | 168282-1 | ROD 4304T/4334D | £20.50 | |
| 46 | 310005-5 | BLADE FIX 4304T/4334D | £13.70 | |
| 47 | 344137-6 | SLIDE PLATE 4304/4305/4331D | £3.00 | |
| 48 | 233151-6 | COMPRESSION SPRING 4 M4301 | £1.00 | |
| 49 | 961017-7 | EXT E-RING JIS JE-3 BPJ140/81 | £1.00 | |
| 50 | 265035-0 | COUNTSUNK TORX HD SCREW M4X10 | £1.00 | |
| 51 | 922126-7 | CAP HD SCREW M4X16 EN4951 | £1.00 | |
| 52 | 961004-6 | EXT DIN CIRCLIP-8 HM1317C/CB | £1.00 | |
| 53 | 442119-3 | *PACKING 4304/4305 | £1.00 | |
| 53 | 442123-2 | PACKING 4304/4305/4334D | £1.00 | |
| 54 | 266045-0 | PT SCREW 4X20 TRILOBULAR 6833 | £1.00 | |
| 54 | 266120-2 | *TAPPING SCREW 4X20 | £1.00 | |
| 55 | 253715-0 | HARD WASHER 6 EA3500/3501 | £1.00 | |
| 56 | 151595-7 | GEAR HOUSING COMPLETE 4304T | £60.70 | |
| 56 | 159852-7 | *GEAR HOUSING COMP 4304T | £0.00 |
NOT AVAILABLE
|
| 57 | 911111-5 | PAN HEAD SCREW M4X10 BO3710/1 | £1.00 | |
| 58 | 253715-0 | HARD WASHER 6 EA3500/3501 | £1.00 | |
| 60 | 272232-1 | LEVER 65 4304T/4334D | £1.00 | |
| 61 | 265434-6 | SPECIAL BOLT M5X24 | £3.60 | |
| 62 | 344332-8 | NUT M6 | £1.00 | |
| 63 | 211031-6 | BALL BEARING 608LLB(/608VV) 6 | £3.20 | |
| 64 | 240039-3 | FAN 54 4334D/4304/4305 | £2.20 | |
| 64 | 241875-0 | *FAN 54 4334D/4304/4305 | £2.00 | |
| 65 | 517096-9 | ARMATURE ASSY 110V 4304/05/06 | £63.00 | |
| 65 | 517099-3 | ARMATURE ASSY 240V 4304/4305 | £63.00 | |
| 66 | 681636-0 | INSULATION WASHER MT814/815 | £2.10 | |
| 67 | 211021-9 | BALL BEARING HP1631/607LLB/43 | £6.10 | |
| 68 | 421494-0 | RUBBER RING 19 4305/T/3707/HP | £4.60 | |
| 69 | 316777-0 | BASE 4304T/4334D | £10.60 |
NOT AVAILABLE
|
| 70 | 344333-6 | CLAMP PLATE 4304T/4334D | £4.20 | |
| 71 | 252142-8 | HEX NUT FLANGE M5 DFL650F | £2.30 | |
| 72 | 911109-2 | PAN HEAD SCREW M4 X 8 BHS630 | £1.00 | |
| 73 | 912202-5 | COUNTERSUNK HEAD SCREW M5X8 | £1.00 | |
| 74 | 344443-9 | BASE PLATE 4304/4305/4331D | £6.10 | |
| 75 | 191962-4 | CARBON BRUSH CB-419 SET HP164 (Pair) | £4.10 | |
| 76 | 643923-5 | BRUSH HOLDER UH4860/4304/4305 | £1.50 | |
| 77 | 646067-0 | CHOKE COIL CH9-5 4304 | £3.60 | |
| 78 | 858235-5 | *NAME PLATE 4304T | £1.00 | |
| 79 | 266050-7 | PT SCREW 4X30 BUC121/122 | £1.00 | |
| 79 | 266118-9 | *TAPPING SCREW 4X30 | £1.00 | |
| 80 | 415532-8 | REAR COVER 4304/4306 | £7.80 | |
| 81 | 819080-3 | LABEL/MAKITA 4304/6831DW/5093D | £1.00 | |
| 82 | 415538-6 | CAP 4304 | £1.00 | |
| 83 | 415748-5 | MOTOR HOUSING 4304/4305/4306 | £14.30 | |
| 84 | 633286-7 | FIELD 110V 4304/4305/4306 | £15.90 | |
| 84 | 633289-1 | FIELD 240V 4304/4305 | £15.90 | |
| 85 | 415879-0 | AIR CAP 4304T/4334D | £1.00 | |
| 86 | 415878-2 | BAFFLE PLATE 4304T/4334D | £1.00 | |
| 87 | 266052-3 | PT SCREW 4X60 TRILOBULAR HR24 | £1.00 | |
| 87 | 266114-7 | *TAPPING SCREW 4X60 | £1.00 | |
| 88 | 272231-3 | LEVER 17 4304/4305/4331D | £7.60 | |
| 89 | 233151-6 | COMPRESSION SPRING 4 M4301 | £1.00 | |
| 90 | 216008-6 | STEEL BALL 4 5008MB/JV101D | £1.00 | |
| 91 | 961018-5 | EXT E-RING JIS JE-5 DLS714 | £1.00 | |
| 92 | 263002-9 | RUBBER PIN 4 GA7050/9050/5021 | £1.00 | |
| 93 | 322893-8 | SAFETY WIRE 4304/T/4305/4331D | £1.00 | |
| 94 | 344537-0 | HEX SLEEVE 4304T/4305T | £1.00 | |
| 95 | 344784-3 | SEAL PLATE 4304/4305/4331D | £2.20 | |
| 96 | 443106-5 | FELT 4304/4305/4331D | £1.00 | |
| 1001 | 413068-1 | BASE PLATE 4304/4305/4304T/06 | £1.00 | |
| 1002 | 415887-1 | PROTECTOR 4304T/4306/4331D | £2.26 | |
| 1003 | 415524-7 | ANTI-SPLINTERING DEVICE 4304/4 | £1.00 | |
| 1004 | 792522-1 | JIG SAW BLADE B-22 | £6.70 | |
| 1004 | A-85737 | JIGSAW BLADE B22 (5PK) 4301BV | £6.64 | |
| 1005 | 792538-6 | JIG SAW BLADE B-10 | £7.30 | |
| 1005 | A-85628 | JIGSAW BLADE B10 (5PK) 4301BV | £6.74 | |
| 1006 | A-02294 | JIG SAW BLADE BR-13 | £5.10 | |
| 1006 | A-85793 | JIGSAW BLADE BR13 4301BV PK5 | £5.10 | |
| 1007 | 824536-3 | PLASTIC CARRYING CASE | £0.00 | |
| 1007 | 824662-8 | PLASTIC CARRYING CASE | £16.00 | |
| 1007 | 824809-4 | PLASTIC CARRYING CASE | £27.38 | |
| 5001 | 192547-9 | VACUUM HEAD | £3.50 | |
| 5004 | 655030-2 | PLUG UK TYPE 16A-4H/110V | £8.34 | |
| 5005 | 654091-9 | NON INSULATED TERMINAL GD0801 | £1.00 |
Carbon brushes (PAIR) Other part no's CB407 CB419 Dimensions 6x9x11.
Basic cut wood blades for general cutting of wood and plastics.
Basic cut wood baldes for hardboard & fibreboard to 3mm hardwood, plastics & ply to 35mm
Basic cut wood blades ideal for curve cutting of wood and plastics. (Scroll Cutting)
Clean cut wood blades for hardboard & fibreboard to 8mm harwood,plastics & ply to 35mm. (Fast Cutting)
Clean cut wood blades for fast fine cut in wood and plastics, especially suited to plywood.
Clean cut wood blades for fast finish work in wood and plastics.
Clean cut wood blades for fast finish work in wood and plastics.
Clean cut wood blades ideal for curve cuttin of wood and plastics.
Clean cut wood blades for laminated wood and decorative veneer finishing. (Reverse tooth pattern)
Clean cut wood blades ideal for scroll cutting of wood and plastics. (Fast cut)
Speed cut wood blades for fast cutting of wood and plastics. (Fast rough cut)
Speed cut wood blades ideal for fast cutting of thick materials.
Speed cut wood blades ideal for cutting thick materials. (Fast cut)
Basic cut metal blades for mild steel, stainless stell and tough plastics, especially suited for thin plate.
Basic cut metal blades for mild steel, medium thick metal plate, wood, decorative
Basic cut metal blades for thin mild steel, stainles steel, very thin metal plate.
Basic cut metal blades for curve cutting in harwoods, metals and plastics.
Basic cut metal blades for curve cutting and scroll in mild steel. Non-ferrous.
Basic cut metal blades for mild steel, tough plastics. Especially thin metal plate.
Basic cut metal blades for medium-thick metal plate, pipes and profiles. Also aluminium.
Basic cut metal blades for finish work in plastics and aluminium
Flexible cut metal blades for cladding to 80mm and sandwich material. (Flexible blade)
Flexible cut metal blades for sandwich materials. (Extra long deep profiles)
Flexible cut metal blades for thin sheet metal pipe non-ferrous and cladding.
Specialized blades for splinter free cuts in wood, requiring no sanding. Up and down cut blade for finish on top surfaces.
Specialized blades for hardwood, thick mild steel plate and tough plastics. Tungsten carbide grit tooth.
Specialized blades ideal for glass fibre and reinforced plastics. TCT teeth for very long tough materials.
Specialized blades ideal for glass fibre and reinforced plastics.
Specialized blades ideal for cutting of paper, cork, ruber and leather.
Specialized blades for thin metal plate, pipes and profiles. Also aluminium plasctics.
Specialized blades for straight cut in laminates, wooden flooring and decorative woods. (Splinter free)
Specialized blades for scroll cut in laminates, wooden flooring and decorative woods. (Splinter free)
Super express blades for super express superior performance with cordless saws. Wood.
Super express blades for super express superior performance with cordless saws. Metal.
Super express blades for super express superior performance with cordless saws. Universal.
Selection pack. Includes: 1 x B-06460, 1 x B-06476, 1 x B-06482
Selection pack. Includes: 1 x A-85737, 1 x A-85743, 1 x A-85656, 1 x A-85684, 1 x B10S
This model also has 45 accessories available.
Scroll down to view them.
