0 603 261 608 Spares and Parts for BOSCH ROUTER POF 600 ACE (ROUTERS)

Ref:	Part Number:	Description	Price
2	2 604 220 491	Field	£17.37
3	2 604 010 769	Armature	£55.92
4	1 607 200 086	Switch	£7.76
6	2 600 703 012	Grommet Ø6,5-Ø6,9X95 MM	£2.33
7	1 601 302 017	Fastening Clamp	£1.00
12	2 607 329 124	Suppression Capacitor	£7.01
13	2 600 905 018	Deep-groove Ball Bearing	£9.05	NOT AVAILABLE
16	2 601 323 021	Brush Holder	£3.27
16	2 601 323 022	Brush Holder	£2.45
18	2 603 410 001	Socket Head Cap Screw	£1.00
19	2 603 490 021	Torx Oval-head Screw	£1.00
20	2 601 118 932	Manufacturer's Nameplate	£2.51	NOT AVAILABLE
25	2 603 490 017	Torx Oval-head Screw	£1.00
26	2 604 652 009	Spiral Spring	£1.00
27	2 600 150 033	Shim	£2.05
28	2 600 101 027	Shim Ring	£1.00
28	2 600 101 667	Shim Ring	£1.00
28	2 600 101 665	Shim Ring	£1.00
29	1 610 712 034	Shrinkable Tube	£1.00
31	1 600 508 009	Housing Cover	£4.02
33	1 602 026 057	Switch Handle	£1.00
34	1 602 319 002	Adjusting Slide	£1.00
35	2 601 328 045	Cover Disc	£2.05
37	2 604 448 016	Connecting Cable	£1.00
38	2 604 448 149	Connecting Cable	£1.00
39	2 604 465 096	Suppressor Box	£4.01
40	1 604 611 026	Compression Spring	£1.00
41	2 607 230 013	Speed Governor	£46.05
42	2 605 806 376	Spindle Housing	£14.83	NOT AVAILABLE
43	2 603 312 006	Union Nut	£4.78
45	2 600 300 073	Seal Bushing	£4.78
46	2 916 660 013	Spring Retaining clip DIN 472-32X1,2 MM	£2.05
47	2 916 650 006	Spring Retaining clip DIN 471-15X1-FST	£1.00
48	2 600 500 033	Cupped Washer	£2.33
49	2 600 108 033	Felt Washer	£1.00
50	2 603 490 023	Torx Oval-head Screw	£1.00
51	2 600 905 017	Deep-groove Ball Bearing	£7.01
52	1 600 102 626	Shim	£2.05
199	1 601 110 265	Sticker	£2.39	NOT AVAILABLE
200	2 607 030 004	Milling Fixture	£77.18
201	2 608 000 014	Base Plate	£1.00	NOT AVAILABLE
202	2 604 615 011	Compression Spring	£1.00	NOT AVAILABLE
203	2 601 010 052	Depth Measure	£1.67	NOT AVAILABLE
205	2 608 005 014	Guide Plate	£16.29	NOT AVAILABLE
206	1 603 501 018	Knurled Thumbscrew	£2.45	NOT AVAILABLE
207	2 603 345 015	Adjusting Nut	£1.90	NOT AVAILABLE
208	2 604 611 008	Compression Spring	£1.00	NOT AVAILABLE
209	2 602 305 044	Detent Pin	£1.00
210	2 911 001 258	Hex Screw	£1.90	NOT AVAILABLE
211	1 613 349 015	Star Knob	£2.45
212	2 603 200 020	Pressure Spindle	£1.00	NOT AVAILABLE
213	2 602 026 001	Handle	£4.01
214	2 601 118 933	Manufacturer's Nameplate	£2.51
215	2 916 011 884	Plain Washer	£1.00
218	2 601 110 137	Sticker	£0.00	Contact Us
219	2 601 031 002	Perforated Plate	£1.00	NOT AVAILABLE
651	2 603 101 035	Straight Pin	£2.45
654	2 602 053 000	Tool Guide	£4.37	NOT AVAILABLE
655	2 607 000 032	Guide Plate	£1.74	NOT AVAILABLE
656	2 910 761 197	Countersunk-head Screw	£1.00	NOT AVAILABLE
657	2 910 011 191	Socket Head Cap Screw	£1.00	NOT AVAILABLE
658	2 603 102 007	Guiding Bolt	£1.90	NOT AVAILABLE
659	2 607 000 067	Edge Guide	£11.20	NOT AVAILABLE
660	1 603 480 003	Wing Screw	£1.00	NOT AVAILABLE
661	2 607 000 033	Fluid-level Gauge	£0.00	Contact Us
662	2 607 000 031	Guide Roller	£0.00	Contact Us
665	2 601 332 007	Guide-plate	£2.51	NOT AVAILABLE
666	2 915 011 007	Hex Nut	£1.00
671	2 607 950 511	Single-head Eng. Wrench	£3.36
672	2 608 190 008	Extractor Head	£0.00	NOT AVAILABLE
673	2 605 730 034	Protective Ring	£2.39	NOT AVAILABLE
744	2 608 570 047	Collet	£11.94
744	2 608 570 048	Collet Ø 6,4MM=1/4" / Ø 10MM	£13.63
744	2 608 570 049	Collet Ø 8 MM / Ø 10 MM	£12.61
801	2 605 108 907	Motor Housing	£11.37	NOT AVAILABLE
810	2 604 320 910	Carbon-brush Set	£7.01
835	1 607 000 386	Power Supply Cord	£15.30
888	1 601 106 999	Nameplate	£2.51
899	2 607 220 901	Universal Motor	£146.50

Accessories for Bosch 0 603 261 608

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Bosch 0 603 261 608

39 Compatible Accessories Available!

Accessories for Bosch 0 603 261 608

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed