We are currently experiencing substantial delays with Hitachi/HiKOKI and Metabo spare parts due to the two brands merging warehouse. At this moment in time we are unable to provide confirmed delivery dates on out of stock parts, for any urgent requirements please contact us prior to ordering.
Enhance your Hitachi KM12VC with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 307-365 | Machine Screw (w/washers) M4x55 (black) | £0.00 | |
| 2 | 317-200 | Machine Screw (w/washers) M4x8 (black) | £1.95 | |
| 3 | 323-267 | Head Cover (b) | £0.00 | |
| 4A | 323-266 | Head Cover (a) | £0.00 | |
| 5 | 954-878 | Machine Screw (w/washers) M4x16 | £1.00 | |
| 6 | 937-631 | Cord Clip | £1.00 | |
| 7 | 317-333 | Machine Screw (w/sp. Washer) M4x6 | £1.95 | |
| 8 | 938-051 | Cord Armor D10.1 | £1.00 | |
| 9 | 500-399Z | Cord | £0.00 | |
| 10 | 959-141 | Connector 50092 (10 Pcs.) | £6.40 | |
| 11 | 938-307 | Pillar Terminal | £3.05 | |
| 12 | 981-373 | Tube (d) | £1.00 | |
| 14 | 323-273 | Controller Circuit | £0.00 | |
| 14 | 328662 | Controller Circuit 127v | £0.00 | |
| 15 | 323-274 | Switch Holder | £0.00 | |
| 16 | 955-509 | Switch (1p Screw Type) | £12.01 | |
| 17 | 930-804 | Terminal M4.0 (10 Pcs.) | £3.36 | |
| 18 | 935-829 | Brush Cap | £1.00 | |
| 19 | 999-043 | Carbon Brush (1 Pair) | £4.06 | |
| 20 | 957-051 | Brush Holder | £6.79 | |
| 22A | 323-256 | Stator Holder Ass'y | £0.00 | |
| 23 | 930-706 | Stop Plate | £0.00 | |
| 24 | 323-424 | Hitachi Plate (c) | £4.94 | |
| 25 | 323-420 | Rubber Ring | £1.00 | |
| 26 | 307-093 | Magnet | £14.42 | |
| 27 | 608-VVM | Ball Bearing 608vvc2ps2l | £5.16 | |
| 28 | 930-703 | Brush Terminal | £3.05 | |
| 29 | 340-595D | Stator Ass'y 120v | £0.00 | |
| 30 | 943-430 | Machine Screw (w/sp. Washer) M5x60 | £1.00 | |
| 31 | 360-668U | Armature Ass'y 120v | £0.00 | |
| 32A | 323-255 | Housing | £0.00 | |
| 33 | 600-4VV | Ball Bearing 6004vvcmps2l | £8.59 | |
| 34 | 323-257 | Bearing Cover | £0.00 | |
| 35 | 323-258 | Thrust Nut | £0.00 | |
| 36B | 332812 | COLLET CHUCK 6MM | £58.94 | |
| 36 | 323-421 | Collet Chuck 1/2" | £12.04 | |
| 37 | 323-260 | Ring | £0.00 | |
| 38 | £0.00 | |||
| 38 | 323-264 | Stopper Pin | £0.00 | |
| 39A | 323-259 | Base (a) | £0.00 | |
| 47 | 323-272 | Template Guide Adapter | £0.00 | |
| 48 | 949-234 | Machine Screw M5x6 (10 Pcs.) | £1.00 | |
| 50A | 323-270 | Lever (a) Ass'y | £0.00 | |
| 51 | 959-155 | Steel Ball D3.97 (10 Pcs.) | £1.00 | |
| 52 | 982-454 | Spring (c) | £1.00 | |
| 53 | 938-477 | Hex. Socket Set Screw M5x8 | £1.00 | |
| 54 | £0.00 | |||
| 55 | £0.00 | |||
| 56 | 306-024 | Spring | £1.00 | |
| 57 | 323-271 | Knob Nut | £0.00 | |
| 57 | £0.00 | |||
| 58 | 323-348 | Fixed Base Ass'y | £0.00 | |
| 58 | £0.00 | |||
| 59 | £0.00 | |||
| 61 | 323-287 | Marker | £0.00 | |
| 62 | 323-286 | Stopper Pole | £0.00 | |
| 63 | 323-279 | Scale (inch) | £0.00 | |
| 64 | 323-423 | Decoration Plate (b) | £0.00 | |
| 65 | 323-422 | Hitachi Plate (a) | £3.80 | |
| 66 | 323-288 | Spring Guide (l) | £0.00 | |
| 67 | 323-289 | Spring (l) | £0.00 | |
| 68 | 323-263 | Machine Screw (w/washers) M6x40 (black) | £0.00 | |
| 69 | 323-261 | Handle (b) | £0.00 | |
| 70 | 323-262 | Handle (a) | £0.00 | |
| 71 | 323-290 | Spring Guide (r) | £0.00 | |
| 72 | 323-291 | Spring (r) | £0.00 | |
| 73A | 323-275 | Housing Holder | £0.00 | |
| 75 | 949-216 | Machine Screw M4x10 (10 Pcs.) | £1.00 | |
| 76 | 323-282 | Washer | £0.00 | |
| 77 | 971-858 | Spring (a) | £1.00 | |
| 78 | 302-196 | Machine Screw M5x20 (black) | £1.00 | |
| 79 | 302-012 | Nut M5 (black) | £1.00 | |
| 80A | 323-281 | Stopper Block | £0.00 | |
| 81 | 307-081 | Machine Screw (w/washers) M4x12 (black) | £0.00 | |
| 82 | 323-292 | Chip Cover | £0.00 | |
| 83 | 302-197 | Machine Screw M5x35 (black) | £1.00 | |
| 84 | 323-427 | Nut M10 | £14.81 | |
| 85 | 323-278 | Knob | £0.00 | |
| 86 | 323-428 | Special Nut (a) M10 | £2.22 | |
| 87 | 307-294 | Machine Screw (w/washers) M5x16 (black) | £1.00 | |
| 88 | 323-277 | Holder Cover | £0.00 | |
| 89 | 323-284 | Lock Spring | £0.00 | |
| 90 | 323-285 | Lock Screw | £0.00 | |
| 91 | 323-283 | Lever (b) | £0.00 | |
| 92A | 323-280 | Lever (a) | £0.00 | |
| 93 | 323-268 | Lever Sleeve | £0.00 | |
| 94 | 323-269 | Lever Holder | £0.00 | |
| 95 | 963-837 | Nylon Nut M6 | £1.00 | |
| 95 | 311-144 | Nylon Nut M6 | £1.00 | |
| 96 | 323-426 | Felt | £2.56 | |
| 97A | 323-276 | Base (b) | £0.00 | |
| 98 | 323-265 | Sub Base (a) | £0.00 | |
| 99 | 949-332 | Flat Hd. Screw M5x12 (10 Pcs.) | £1.00 | |
| 100 | 323-349 | Plunge Base Ass'y | £0.00 | |
| 501 | 323-293 | Collet Chuck 1/4" | £11.87 | |
| 502 | 323-298 | Template Guide D7.9 | £0.00 | |
| 502 | 323-299 | Template Guide D9.5 | £0.00 | |
| 502 | 323-300 | Template Guide D11.1 | £0.00 | |
| 502 | 323-301 | Template Guide D12.7 | £0.00 | |
| 502 | 323-302 | Template Guide D15.9 | £0.00 | |
| 502 | 323-303 | Template Guide D19.1 | £0.00 | |
| 502 | 323-304 | Template Guide D20.2 | £0.00 | |
| 503 | 323-305 | Lock Nut | £0.00 | |
| 504 | 323-296 | Centering Gauge | £0.00 | |
| 505 | 323-294 | Wrench 16mm | £0.00 | |
| 506 | 323-295 | Wrench 23mm | £2.99 | |
| 507 | 960-101 | Wrench 10mm | £8.59 | |
| 508 | 944-458 | Hex. Bar Wrench 4mm | £1.00 | |
| 509 | 323-297 | Sub Base (b) | £0.00 | |
| 510 | 949-819 | Hex. Socket Hd. Bolt M5x10 (10 Pcs.) | £2.79 | |
| 511 | 323-358 | Case | £0.00 | |
| 601 | 932624 | Collet Chuck 3mm | £36.83 | |
| 601 | 313-765 | Straight Bit (tct) D1/2"x1/2" | £41.84 | |
| 602 | 323-346 | Dust Collector Set | £0.00 | |
| 602 | 939100 | Mounted Wheels Ka-1 D6 Shaft (10 Pcs.) | £0.00 | |
| 603 | 323-347 | Knob Nut (a) | £0.00 | |
| 603 | 939101 | Mounted Wheels Ka-2 D6 Shaft (10 Pcs.) | £0.00 | |
| 604 | 939102 | Mounted Wheels Ka-3 D6 Shaft (10 Pcs.) | £0.00 | |
| 604 | 302-317 | Machine Screw M5x16 (black) | £1.00 | |
| 605 | 323-342 | Straight Guide Ass'y | £0.00 | |
| 605 | 939103 | Mounted Wheels Ka-4 D6 Shaft (10 Pcs.) | £0.00 | |
| 606 | 323-343 | Bar Holder (a) | £0.00 | |
| 606 | 939104 | Mounted Wheels Ka-5 D6 Shaft (10 Pcs.) | £0.00 | |
| 607 | 323-344 | Straight Guide | £0.00 | |
| 607 | 939105 | Mounted Wheels Ka-6 D6 Shaft (10 Pcs.) | £0.00 | |
| 608 | 323-345 | Guide Bar | £0.00 | |
| 608 | 939106 | Mounted Wheels Ka-7 D6 Shaft (10 Pcs.) | £0.00 | |
| 609 | 939107 | Mounted Wheels Ka-8 D6 Shaft (10 Pcs.) | £0.00 | |
| 609 | 956-793 | Feed Screw | £5.47 | |
| 610 | 939108 | Mounted Wheels Ka-9 D6 Shaft (10 Pcs.) | £0.00 | |
| 610 | 301-806 | Wing Bolt M6x15 | £1.00 | |
| 611 | 939109 | Mounted Wheels Ka-10 D6 Shaft (10 Pcs.) | £0.00 | |
| 612 | 939110 | Mounted Wheels Ka-20 D3 Shaft (20 Pcs.) | £0.00 | |
| 613 | 939111 | Mounted Wheels Ka-21 D3 Shaft (20 Pcs.) | £0.00 | |
| 614 | 939112 | Mounted Wheels Ka-22 D3 Shaft (20 Pcs.) | £0.00 | |
| 615 | 939113 | Mounted Wheels Ka-23 D3 Shaft (20 Pcs.) | £0.00 | |
| 616 | 939114 | Mounted Wheels Ka-24 D3 Shaft (20 Pcs.) | £0.00 | |
| 617 | 939115 | Mounted Wheels Kc-20 D3 Shaft (20 Pcs.) | £0.00 | |
| 618 | 939116 | Mounted Wheels Kc-21 D3 Shaft (20 Pcs.) | £0.00 | |
| 619 | 939117 | Mounted Wheels Kc-22 D3 Shaft (20 Pcs.) | £0.00 | |
| 620 | 939118 | Mounted Wheels Kc-23 D3 Shaft (20 Pcs.) | £0.00 | |
| 621 | 939119 | Mounted Wheels Kc-24 D3 Shaft (20 Pcs.) | £0.00 | |
| 622 | 932671 | Cover | £0.00 |
Two flute cutter 3mm diameter - C001AX1/4TC
Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 3.2mm diameter - C001BX1/4TC
Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C007X1/4TC
Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C008X1/4TC
Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 8.0mm diameter - C012AX1/4TC
Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 10mm diameter - C016X1/4TC
Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019AX1/4TC
Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019X1/4TC
Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12.7mm diameter - C022X1/4TC
Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 15.0mm diameter - C024AX1/4TC
Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 20.0mm diameter - C030AX1/4TC
Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC
TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC
Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC
Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC
Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
Self guided trimmer 12.7mm diameter - C116X1/4TC
Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
Template profile 12.7mm diameter - C121X1/4TC
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
Biscuit jointer set - C152X1/2TC
Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
Biscuit jointer set - C152X1/4TC
Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
Two flute cutter 12.7mm diameter - C153DX1/2TC
Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12.7mm diameter - C153X1/2TC
Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12.7mm diameter - C164X1/2TC
Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC
Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
Two flute cutter 12mm diameter - C172X1/2TC
Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC
Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.
Intumescent cutter set 10mm x 40mm - C208X1/2TC
Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.
Intumescent cutter set 10mm x 24mm - C209X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
Intumescent cutter set 15mm x 24mm - C220X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
Two flute cutter 12.7mm diameter - TR17DX1/2TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.
Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC
Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.
Two flute cutter 12.7mm diameter - TR18DX1/2TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.
Two flute cutter 12.7mm diameter - TR18X1/2TC
Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.
Two flute cutter 15.9mm diameter - TR19X1/4TC
Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
Two flute cutter 19.1mm diameter - TR20X1/4TC
Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
Radius 5mm radius and 18mm diameter - TR21X1/4TC
Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Chamfer V groove cutter angle=45 degrees - TR22X1/4TC
Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
Guided trimmer 6.35mm x 12.7 - TR23X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC
Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer 12.7mm x50mm - TR28X1/2TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
Guided ovolo over 9.5mm radius - TR32X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC
Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
Bearing guided rebater 12.7mm - TR34X1/2TC
Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)
Biscuit jointer set - TR35X1/2TC
Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
Biscuit jointer set - TR35X1/4TC
Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
Two flute cutter 12mm diameter - TR37X1/2TC
Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.
Two flute cutter 15mm diameter - TR40DX1/2TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
Two flute cutter 15mm diameter - TR40DX1/4TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
Intumescent cutter set 10mm x 40mm - TR41X1/2TC
Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.
Intumescent cutter set 15mm x 40mm - TR42X1/2TC
Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.
This model also has 57 accessories available.
Scroll down to view them.
