3703 Spares and Parts for MAKITA 3703 (WOODWORKING)

Ref:	Part Number:	Description	Price
1	856566-6	'NAME PLATE 3703	£1.00
2	911168-6	*PAN HD SCREW 4X40 W/CP	£1.00
3	265995-6	TAPPING SCREW 4X18	£1.00
3	265941-9	*TF SCREW 4X18 TRILBULAR	£1.00
4	687052-4	STRAIN RELIEF HS7100/BO5041	£1.00
4	687063-9	STRAIN RELIEF UH4570/55/5580/	£1.00
5	410062-4	REAR COVER 3705	£5.00
6	663514-6	*POWER SUPPLY CORD 1.00-2-2.5	£8.50	NOT AVAILABLE
6	692021-2	POWER SUPPLY CORD 1.0-2-2.5	£6.50
6	663926-3	POWER SUPPLY CORD 1.00-2-2.5	£8.50
7	682502-4	CORD GUARD 8-85 3707/N1923B	£1.00
8	159301-4	MOTOR REAR HOUSING 3703	£18.20
9	643550-8	BRUSH HOLDER CAP CB-9-14-17/N	£1.00
10	191940-4	CARBON BRUSH CB-411 TD0101F/S	£4.60
11	593146-4	FIELD 110V 3703	£14.30
11	593149-8	FIELD 240V 3703	£15.90
12	211028-5	BALL BEARING 627LB/HP1641/903	£8.00
13	681614-0	INSULATION WASHER 627/N1923BD	£1.00
14	911596-5	*PAN HD SCREW M4X70 3901	£1.00
15	511916-9	ARMATURE 110V 3703	£84.60
15	511919-3	ARMATURE 240V 3703	£84.60
16	241516-8	FAN 52	£0.00	Contact Us
16	241615-6	FAN 52 3703	£6.40
17	211223-7	BALL BEARING 6002DDW	£7.20
18	253905-5	WAVE WASHER 23 8035NB	£1.00
19	414567-6	MOTOR HOUSING 3703	£14.80
20	263014-2	RUBBER PIN 4 SR2600/N1923BD/HR	£1.00
21	410069-0	SWITCH HOLDER 3705	£1.00
22	651467-1	SWITCH STE206K	£13.10
23	645105-5	NOISE SUPPRESSOR/CONDENSOR 64	£3.00
23	645117-8	'NOISE SUPPRESSOR BO5000	£2.50
24	251890-6	SPECIAL THUMB BOLT M5X33 3703	£4.60
25	763608-8	COLLET CONE 6.35 3700B/3708F	£4.90
26	763606-2	COLLET NUT 6 3700B/906/3707	£3.90
27	226217-9	SPUR GEAR 16 3703/3901	£1.00
28	411930-4	BASE 3703	£18.20
29	411115-2	*CHIP DEFLECTOR 3700B	£1.00
29	418647-0	CHIP DEFLECTOR 3700B/3701/370	£1.00
30	410585-2	BASE PROTECTOR 3703	£4.30
31	251308-7	PAN HD SCREW M4X10 3703	£1.00
32	251815-0	KNUR THUMB SETSCREW M6X25 370	£1.00
33	253903-9	WAVE WASHER 6 3703/2414B/NB	£1.00
34	941151-9	FLAT WASHER 6 DIN125-B BHS630	£1.00
35	312650-2	*TRIMMER GUIDE 3700B/3707/370	£4.70
35	317789-6	TRIMMER GUIDE 3700B/3707/3707	£1.00
36	251819-2	*THUMB SET SCREW M6X20 3707/3	£1.00
36	265764-5	THUMB SET SCREW M6X20 3707/37	£1.00
37	323495-3	*ROLLER 11 3700B/3707/F/3708/	£1.70
37	324378-0	ROLLER 11 3700B/3707/F/3708/F	£1.00
38	251420-3	*S HD SHOULDER SCREW M5	£7.10	NOT AVAILABLE
38	251471-6	SLOTTED HD SHOULDER SCREW M5	£1.00
39	252632-1	*SPADE GRIP NUT M5	£4.00
40	941101-4	FLAT WASHER 5 DIN125-B RP0900	£1.00
41	341136-9	HOOK 3700B/3707/F/3708/F/DRT50	£1.00
42	265135-6	COUNTERSUNK SCREW M4X12 W/SP	£1.00
42	912116-8	COUNTERSUNK SCREW M4X12 W/SP	£1.00
43	251815-0	KNUR THUMB SETSCREW M6X25 370	£1.00
43	265763-7	KNUR THUMB SETSCREW M6X25 370	£1.00
44	253903-9	WAVE WASHER 6 3703/2414B/NB	£1.00
45	941151-9	FLAT WASHER 6 DIN125-B BHS630	£1.00
46	312396-0	*GUIDE HOLDER 3700B/3707/F/08	£4.50
46	317788-8	GUIDE HOLDER 3700B/3707/F/08/	£1.90
47	122389-7	Price on application	£16.20
47	122703-7	TRIMMER GUIDE ASSY RT0700C/370	£14.56
1001	251919-8	SQ NECK SETSCREW M6X20 BCS550	£1.00
1002	343593-7	Price on application	£2.10
1003	122391-0	STRAIGHT GUIDE ASSY 3708F/3700	£8.94
1004	941151-9	FLAT WASHER 6 DIN125-B BHS630	£1.00
1005	253903-9	WAVE WASHER 6 3703/2414B/NB	£1.00
1006	934301-3	WING NUT M6	£1.00
1007	343577-5	TEMPLATE GUIDE 3700B/3705/3707	£4.68
1008	781003-0	Price on application	£3.30
1009	781008-0	Price on application	£20.81
1010	793074-5	Price on application	£17.70
1010	D-09173	Price on application	£9.50

Accessories for Makita 3703

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Brush - 191938-1 (CB408)

Carbon brushes (PAIR) Other part no's 191940-4 CB411 CB421 Dimensions 6x9x12.

Price: £5.88

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the Makita 3703

40 Compatible Accessories Available!

Accessories for Makita 3703

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed