DW620 Type 2 Spares and Parts for DEWALT DW620 (ROUTERS)

Ref:	Part Number:	Description	Price
1	328255-00	ARMATURE 230V	£94.25
1	328256-00	ARMATURE 115V	£100.82
2	327429-11	FIELD 120V	£20.12
2	327429-09	FIELD 230V	£19.55
3	323132-00	SWITCH	£14.83
4	This part is unavailable Notify Me
5	330060-44	CORDSET (M/PLUG)	£14.57	NOT AVAILABLE
5	330061-04	CORDSET (M/PLUG)	£12.48
6	580017-00	BRUSH 230V	£6.29
6	580017-01	BRUSH 115V	£6.29
7	330065-09	SCREW	£1.88
8	326603-01	END CAP	£2.94
9	N434647	VACUUM ADAPTOR	£7.58
10	326287-00	CAP	£1.88
11	326268-00	BELLOWS	£16.28
12	326283-00	SPRING SA	£14.83
13	326279-00	CLIP	£1.88
14	326607-00	CLIP	£4.24
16	326667-00	BRUSH SPRING	£1.88
16	326667-01	BRUSH SPRING	£1.88
17	578774-00	BRAND LABEL	£2.29
20	328252-02	HOUSING MOTOR	£37.26
20	328252-01	HOUSING MOTOR	£25.80
21	320785-00	CORD PROTECTOR	£1.88
22	821070	CORD CLAMP	£1.88
23	330065-06	SCREW	£1.88
24	326258-01	SWITCH COVER	£2.72
25	330065-10	SCREW	£1.88
26	326845-00	WASHER SPRING	£1.88
27	329016-00	GUIDE	£1.88
28	323395-13	SPRING	£1.88
29	605040-63	BEARING	£3.74
30	326604-00	BAFFLE FAN	£4.24
31	326616-04	SPINDLE LOCK	£14.83
35	326600-00	ADJUSTER	£5.11
36	326265-00	SCALE	£3.74
37	321118	WASHER	£1.88
38	323395-14	SPRING	£1.88
40	326602-00	INSERT	£2.29
41	328254-00	HOUSING LOWER	£80.20
42	326285-00	CLAMP	£1.88
43	570936-00	BEARING	£11.17
44	330065-04	SCREW	£1.88
45	326606-00	GUIDE	£1.88
46	326294-02	PINION	£7.58
47	326673-00	LOCKING RING	£3.74
48	326286-00	COLLET & NUT SA	£20.09
49	326273-00	DUST GUARD	£2.29
50	326599-00	CAP 21 MM	£1.88
51	326598-01	HANDLE RH	£2.29
52	323395-10	SPRING	£1.88
53	326601-00	LOCKING KNOB	£1.88
54	326252-01	ACTUATOR	£1.88	NOT AVAILABLE
55	326256-00	LEVER	£1.88
56	949726-05	NUT	£1.88
57	326573-01	SCREW WING	£2.29
59	328253-00	BASEPLATE SA	£84.34
60	326610-00	SCREW	£1.88
61	327012-00	WASHER SPRING	£1.88
62	868109-00	SCREW	£1.88
63	942931-01	SCREW	£1.88
64	942931-02	SCREW.TEMP	£1.88
65	860083-02	NUT	£1.88
66	326662-00	TURRET	£6.29
67	720664-00	BALL	£1.88
68	326270-00	BASEPLATE	£19.10
69	324821-00	CIRCLIP	£1.88
70	324006-00	SCREW	£1.88
70	324006-00	SCREW	£1.88
71	328788-00	GUIDE	£5.11
72	328784-00	FENCE	£11.17
73	328786-00	EXHAUST	£7.58
74	330016-01	WASHER	£1.88
76	326573-02	SCREW	£2.72
77	330016-02	WASHER	£1.88
78	328785-00	BRACKET	£4.24
79	323395-21	SPRING	£1.88
80	942918-00	INDEX	£1.88
81	326239-00	ADJUSTER	£4.24
82	579510-00	ROD	£4.24
83	31351301	SPANNER	£3.24
84	326276-03	GUIDE BUSH	£12.48
85	911141-00	SCREW	£1.88
86	949877-01	CAPACITOR	£1.88
88	326300-00	KNOB SA	£11.17
89	326313-01	COVER	£12.48
90	911026	SCREW	£1.88
91	323395-22	SPRING	£1.88
92	323711-26	O RING	£1.88
93	868082-00	SPRING	£1.88
93	868082-00	SPRING	£1.88
94	945121-00	SCREW.TEMP	£1.88
94	945121-00	SCREW.TEMP	£1.88
95	911058	SCREW	£1.67
99	326309-01	RACK	£16.28
800	870889-02	GREASE	£8.23
836	559582-99	S.T.WRENCH	£90.08
837	559585-98	S.T.ASSEMBLY JIG	£73.47
838	559585-99	PIN	£16.61

Accessories for DeWalt DW620 Type 2

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £10.50

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £13.73

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £8.82

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £11.00

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £13.01

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

Price: £16.57

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

Price: £12.69

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

Price: £14.06

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

Price: £14.90

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

Price: £14.90

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £23.19

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

Price: £27.60

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £32.01

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £16.15

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £17.09

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

Price: £33.60

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

Price: £13.73

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

Price: £27.71

Collet and nut set 1/4 DW620-621K - DE6951

Replacement collet. Fits the following machines:- Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW620, 621 Black & Decker SR100, BD780, 780E

D=8 mm d=1/4 inch Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW613, 614, 615, 620, 621 Black & Decker SR100, BD780, 780E Includes:

Price: £21.15

Collet and nut 8mm Of97-Dw620-Dw621K - DE6952

Replacement collet. Fits the following machines:- Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW620, 621 Black & Decker SR100, BD780, 780E

D=8 mm d=8 mm Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW613, 614, 615, 620, 621 Black & Decker SR100, BD780, 780E Includes:

Price: £19.00

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

Price: £20.97

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £17.63

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £15.95

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

Price: £16.57

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

Price: £19.31

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

Price: £21.51

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

Price: £26.44

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

Price: £38.02

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

Price: £23.19

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

Price: £43.05

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

Price: £36.95

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

Price: £39.17

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

Price: £28.36

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

Price: £42.41

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

Price: £22.56

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

Price: £17.30

Buy Replacement Parts and Accessories for the DeWalt DW620 Type 2

41 Compatible Accessories Available!

Accessories for DeWalt DW620 Type 2

Contact Info

Secure Shopping

Our Service

Help And Advice

Your Account

Recently Viewed