Enhance your Makita 3707FC with our range of accessories
| Ref: | Part Number: | Description | Price | |
|---|---|---|---|---|
| 1 | 692021-2 | POWER SUPPLY CORD 1.0-2-2.5 | £6.50 | |
| 1 | 663926-3 | POWER SUPPLY CORD 1.00-2-2.5 | £8.50 | |
| 2 | 682502-4 | CORD GUARD 8-85 3707/N1923B | £1.00 | |
| 3 | 853543-9 | NAME PLATE 3707FC | £1.00 | |
| 4 | 417747-3 | REAR COVER 3707F/3708F | £3.60 | |
| 5 | 631486-3 | 'CONTROLLER 110V 3707FC/3708FC | £40.90 | |
| 5 | 631487-1 | CONTROLLER 240V 3707FC/3708FC | £40.90 | |
| 6 | 265995-6 | TAPPING SCREW 4X18 | £1.00 | |
| 7 | 687063-9 | STRAIN RELIEF UH4570/55/5580/ | £1.00 | |
| 8 | 643928-5 | BRUSH HOLDER CAP TD0101F/3707 | £1.00 | |
| 9 | 191940-4 | CARBON BRUSH CB-411 TD0101F/S | £4.60 | |
| 9 | 191938-1 | *CARBON BRUSH CB408 3707F/08F | £3.60 | |
| 10 | 183417-3 | MOTOR REAR HOUSING 3707/F&08/ | £14.80 | |
| 11 | 595064-2 | 'FIELD ASSY 240V 3707FC/3708FC | £18.20 | |
| 11 | 599704-4 | 'FIELD ASSY 110V 3707FC/3708FC | £18.20 | |
| 12 | 266004-4 | PT SCREW 4X70 | £1.00 | |
| 13 | 259039-2 | SELF LOCK 6 GD0801C/811C | £1.00 | |
| 14 | 688117-5 | MAGNET SLEEVE GD0801C/GD0811 | £2.50 | |
| 15 | 253332-6 | THIN WASHER 6 6791D/CS246.4 | £1.00 | |
| 16 | 267756-0 | WAVE WASHER TM3000C/9564&65CV | £1.00 | |
| 17 | 421494-0 | RUBBER RING 19 4305/T/3707/HP | £4.60 | |
| 18 | 210017-7 | BALL BEARING 607DDW BO5041/3 | £3.90 | |
| 19 | 681636-0 | INSULATION WASHER MT814/815 | £2.10 | |
| 20 | 517569-2 | *ARMATURE ASSY 240V 3707FC/08F | £44.80 | |
| 20 | 517619-3 | ARMATURE ASSY 240V 3707FC/08FC | £42.10 | |
| 20 | 518551-4 | *ARMATURE ASSY 110V 3707FC/08F | £44.80 | |
| 20 | 518554-8 | ARMATURE ASSY 110V 3707FC/08FC | £42.10 | |
| 21 | 240049-0 | FAN 48 3707F/3708F | £2.40 | |
| 22 | 961055-9 | EXT DIN 471 CIRCLIP-15 9217SP | £1.00 | |
| 23 | 211236-8 | BALL BEARING 6002DDW GA5020/2 | £6.10 | |
| 24 | 651423-1 | SWITCH BTM/3707F/3708F/DTM51 | £8.00 | |
| 25 | 819720-3 | LABEL/MAKITA 6071DWGD0800C | £1.00 | |
| 26 | 654544-8 | TERMINAL BLOCK 3707F/3708F | £1.00 | |
| 29 | 251991-0 | +TAPPING SCREW M4X12 122291-4 | £1.00 | |
| 30 | 631480-5 | LEAD CIRCUIT 3707F/3708F | £19.40 | |
| 31 | 266053-1 | PT SCREW 4X35 VC3211M/BSS501 | £1.00 | |
| 32 | 153347-2 | MOTOR HOUSING CO 3707F/08F | £8.30 | |
| 33 | 763608-8 | COLLET CONE 6.35 3700B/3708F | £4.90 | |
| 34 | 763606-2 | COLLET NUT 6 3700B/906/3707 | £3.90 | |
| 35 | 251815-0 | KNUR THUMB SETSCREW M6X25 370 | £1.00 | |
| 36 | 942151-2 | *SPRING WASHER 6 | £1.00 | |
| 37 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 | |
| 38 | 417748-1 | *BASE 3707F | £7.10 | |
| 39 | 417749-9 | BASE PROTECTOR 3707F | £3.20 | |
| 40 | 256158-5 | PIN 3 BCV01/6835DWA/BLS820/JR | £1.00 | |
| 41 | 421566-1 | ROLLER 3707F/3708F | £1.00 | |
| 42 | 252103-8 | HEX LOCK NUT M5-8 BO3710/3711 | £1.00 | |
| 43 | 941101-4 | FLAT WASHER 5 DIN125-B RP0900 | £1.00 | |
| 44 | 267214-6 | FLAT WASHER 6 3707F/08F | £1.00 | |
| 45 | 324243-3 | SUPPORT PIN 3707F/08F | £3.20 | |
| 46 | 951060-4 | SPRING PIN 3-14 3707F/3708F/A | £1.00 | |
| 47 | 421818-0 | RUBBER CAP 3707F/3708F | £1.00 | |
| 48 | 345229-4 | LOCK LEVER 3707F/3708F | £2.30 | |
| 49 | 912122-3 | COUNTERSUNK SCREW M4X14 | £1.00 | |
| 50 | 253905-5 | WAVE WASHER 23 8035NB | £1.00 | |
| 1001 | 122389-7 | Price on application | £16.20 | |
| 1001 | 122703-7 | TRIMMER GUIDE ASSY RT0700C/370 | £14.56 | |
| 1002 | 251819-2 | *THUMB SET SCREW M6X20 3707/3 | £1.00 | |
| 1002 | 265764-5 | THUMB SET SCREW M6X20 3707/37 | £1.00 | |
| 1003 | 265135-6 | COUNTERSUNK SCREW M4X12 W/SP | £1.00 | |
| 1003 | 912116-8 | COUNTERSUNK SCREW M4X12 W/SP | £1.00 | |
| 1004 | 341136-9 | HOOK 3700B/3707/F/3708/F/DRT50 | £1.00 | |
| 1005 | 251420-3 | *S HD SHOULDER SCREW M5 | £7.10 |
NOT AVAILABLE
|
| 1005 | 251471-6 | SLOTTED HD SHOULDER SCREW M5 | £1.00 | |
| 1006 | 323495-3 | *ROLLER 11 3700B/3707/F/3708/ | £1.70 | |
| 1006 | 324378-0 | ROLLER 11 3700B/3707/F/3708/F | £1.00 | |
| 1007 | 312396-0 | *GUIDE HOLDER 3700B/3707/F/08 | £4.50 | |
| 1007 | 317788-8 | GUIDE HOLDER 3700B/3707/F/08/ | £1.90 | |
| 1008 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 | |
| 1009 | 253903-9 | WAVE WASHER 6 3703/2414B/NB | £1.00 | |
| 1010 | 251815-0 | KNUR THUMB SETSCREW M6X25 370 | £1.00 | |
| 1010 | 265763-7 | KNUR THUMB SETSCREW M6X25 370 | £1.00 | |
| 1011 | 343577-5 | TEMPLATE GUIDE 3700B/3705/3707 | £4.68 | |
| 1012 | 781003-0 | Price on application | £3.30 | |
| 1013 | 781008-0 | Price on application | £20.81 | |
| 1014 | 251919-8 | SQ NECK SETSCREW M6X20 BCS550 | £1.00 | |
| 1015 | 253903-9 | WAVE WASHER 6 3703/2414B/NB | £1.00 | |
| 1016 | 934301-3 | WING NUT M6 | £1.00 | |
| 1017 | 941151-9 | FLAT WASHER 6 DIN125-B BHS630 | £1.00 | |
| 1018 | 793074-5 | Price on application | £17.70 | |
| 1019 | 343594-5 | Price on application | £11.52 | |
| 1020 | 343593-7 | Price on application | £2.10 | |
| 1021 | D-09173 | Price on application | £9.50 | |
| 5001 | 654091-9 | NON INSULATED TERMINAL GD0801 | £1.00 | |
| 5002 | 655030-2 | Price on application | £8.34 |
Two flute cutter 3mm diameter - C001AX1/4TC
Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 3.2mm diameter - C001BX1/4TC
Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C007X1/4TC
Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 6.3mm diameter - C008X1/4TC
Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 8.0mm diameter - C012AX1/4TC
Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 10mm diameter - C016X1/4TC
Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019AX1/4TC
Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12mm diameter - C019X1/4TC
Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 12.7mm diameter - C022X1/4TC
Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 15.0mm diameter - C024AX1/4TC
Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.
Two flute cutter 20.0mm diameter - C030AX1/4TC
Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.
Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC
TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.
Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC
Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings
Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC
Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.
Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC
Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.
Self guided trimmer 12.7mm diameter - C116X1/4TC
Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.
Template profile 12.7mm diameter - C121X1/4TC
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.
Biscuit jointer set - C152X1/4TC
Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)
Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC
Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.
Intumescent cutter set 10mm x 24mm - C209X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.
Intumescent cutter set 15mm x 24mm - C220X1/4TC
Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.
Two flute cutter 15.9mm diameter - TR19X1/4TC
Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.
Two flute cutter 19.1mm diameter - TR20X1/4TC
Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.
Radius 5mm radius and 18mm diameter - TR21X1/4TC
Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.
Chamfer V groove cutter angle=45 degrees - TR22X1/4TC
Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.
Guided trimmer 6.35mm x 12.7 - TR23X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut
Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut
Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut
Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC
Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut
Guided trimmer 12.7mm x50mm - TR28X1/2TC
Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut
Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.
Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.
Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.
Guided ovolo over 9.5mm radius - TR32X1/4TC
Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.
Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC
Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.
Biscuit jointer set - TR35X1/4TC
Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut
Two flute cutter 15mm diameter - TR40DX1/4TC
Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.
Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.
This model also has 39 accessories available.
Scroll down to view them.
